Re: Networking Problem

[Jonathan Barnes <jrb@jmc.id.au>]

Matt Perry wrote:

> On Sun, 1 Aug 2004, Jonathan Barnes wrote:
>
>
> > I cant see anything wrong with my routing table either:
> >
> > > Kernel IP routing table
> > > Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
> > > 10.0.0.0        0.0.0.0         255.255.255.0   U     0      0        0 eth0
> > > 10.0.0.0        0.0.0.0         255.255.255.0   U     0      0        0 eth1
> > > 0.0.0.0         10.0.0.1        0.0.0.0         UG    0      0        0 eth0
>
>
> You have the same network configured on two interfaces.  Are eth0 and eth1
> on the same NIC?  Should eth1 have a destination of 10.1.1.0 instead?

eth0 is assigned 10.0.0.2 and is connected to the first firewall in my network
eth1 is assigned 10.1.1.1 and is connected to my private LAN, they are both 
separate Realtek 8139 NIC's

Not sure about the destination, or how to change it. I agree with what your 
saying about eth1 should have the 10.1.1.0 destination, but thats only the 
private network, and nothing to do with eth0, the NIC that gets the Internet.