Re: usb 7 in 1 card reader -- not working

[Roberto Sanchez <rcsanchez97@yahoo.es>]

Rodney D. Myers wrote:
> This may be a case of operator error, but... 
>
> I just received my "Syntax IC Card Reader - 7-in-1 external Card Reader"
>
>
> when I plug the reader into a USB port, it shows via dmesg; 
>
> hub.c: new USB device 00:10.2-1, assigned address 4 
> WARNING: USB Mass Storage data integrity not assured 
> USB Mass Storage device found at 4 
>
> and tail /var/log/messages shows; 
> Apr 7 13:40:15 riverside kernel: hub.c: new USB device 00:10.2-1,
> assigned address 4 Apr 7 13:40:19 riverside usb.agent[16088]: kernel
> driver usb-storage already loaded 
>
> I insert my sda memory card, but not shows in dmesg or /var/log/messages
>
>
> doing a "cat /proc/scsi/scsi" show; 
> Host: scsi0 Channel: 00 Id: 00 Lun: 00 
> Vendor: SAMSUNG Model: CD-ROM SC-152L Rev: C100 
> Type: CD-ROM ANSI SCSI revision: 02 
> Host: scsi0 Channel: 00 Id: 01 Lun: 00 
> Vendor: Memorex Model: 52MAXX 2452AJ Rev: 6WS2 
> Type: CD-ROM ANSI SCSI revision: 02 
> Host: scsi1 Channel: 00 Id: 00 Lun: 00 
> Vendor: IC Model: USB Storage-CFC Rev: 322E 
> Type: Direct-Access ANSI SCSI revision: 02 
>
> my 2 cdrom/cd-writer, and the card reader.. 
>
> Now, I'm "assuming" that the memory card will be sda/sda1, but nothings
> shows up telling for sure. 
>
> If I attempt to run fsck or fdisk on /dev/sda I get the following error
> message(s); 
>
> sudo fdisk /dev/sda1 
> Unable to open /dev/sda1 
>
> fsck 1.35 (28-Feb-2004) 
> e2fsck 1.35 (28-Feb-2004) 
> fsck.ext2: Attempt to read block from filesystem resulted in short read
> while trying to open /dev/sda Could this be a zero-length partition? 
>
>
> Now I have no idea what else to try. 
>
> This is for the memory chip on my Microtek S1 camera, recently reviewed
> on MozillaQuest 
>
> Thanks

Do you have USB Mass Storage compiled in or loaded as a module?

-Roberto Sanchez

Attachment: signature.asc
Description: OpenPGP digital signature