RE: Samba Configuration ?

["Drogo Bumbleroot" <bumbleroot@cox.net>]

Title: Message

Unfortunatley I can't help you much...

 

My biggest feat w/ Samba was to share out a printer.

 

- Ed -

 

-----Original Message-----
From: Support [mailto:support@leaderuniversal.com]
Sent: Monday, March 29, 2004 10:36 PM
To: Drogo Bumbleroot; 'debian-usedebian-useDebian User'
Subject: RE: Samba Configuration ?

Hi! Drogo


Thank a lot for your HELP, The problem asking for a password $IPC is no longer asking me. But still got one more problem.

Now I can browse my Linux samba server share folder, but when I double click to access it, my samba server still asking for password. I have double check my /etc/samba/smbpasswd my username are in the list.

Need your HELP again.




At 11:12 AM 3/30/04, Drogo Bumbleroot wrote:

Look into the "security=" section.
 
I think your answer may be in there.
 
I remember having to use "security=share" in the past.  However it's been a while since I mucked with Samba.
 

-----Original Message-----

From: Support [mailto:support@leaderuniversal.com]

Sent: Monday, March 29, 2004 9:37 PM

To: debian-usedebian-useDebian User

Subject: Samba Configuration ?

Dear: All Debian Users

I have just configure my samba in my Linux Server. I use the default setting. But when I try to browse it with my Windows98 it prompt for a password. Below is my smb.conf file setting. Need some help to access my samba /Home.

#

# Sample configuration file for the Samba suite for Debian GNU/Linux.

#

# $Id: smb.conf,v 1.2.4.6 2002/03/13 18:56:16 peloy Exp $

#

# This is the main Samba configuration file. You should read the

# smb.conf(5) manual page in order to understand the options listed

# here. Samba has a huge number of configurable options most of which

# are not shown in this example

#

# Any line which starts with a ; (semi-colon) or a # (hash)

# is a comment and is ignored. In this example we will use a #

# for commentary and a ; for parts of the config file that you

# may wish to enable

#

# NOTE: Whenever you modify this file you should run the command

# "testparm" to check that you have not many any basic syntactic

# errors.

#

#======================= Global Settings =======================

[global]

# Change this for the workgroup/NT-domain name your Samba server will part of

   workgroup = LEADERPG

# server string is the equivalent of the NT Description field

   server string = %h server (Samba %v)

# If you want to automatically load your printer list rather

# than setting them up individually then you'll need this

;   load printers = yes

# You may wish to override the location of the printcap file

;   printcap name = /etc/printcap

# 'printing = cups' works nicely

;   printing = bsd

;   guest account = nobody

   invalid users = root

# This tells Samba to use a separate log file for each machine

# that connects

   log file = /var/log/samba/log.%m

# Put a capping on the size of the log files (in Kb).

   max log size = 1000

# If you want Samba to log though syslog only then set the following

# parameter to 'yes'. Please note that logging through syslog in

# Samba is still experimental.

;   syslog _only_ = no

# We want Samba to log a minimum amount of information to syslog. Everything

# should go to /var/log/samba/log.{smb,nmb} instead. If you want to log

# through syslog you should set the following parameter to something higher.

   syslog = 0

# "security = user" is always a good idea. This will require a Unix account

# in this server for every user accessing the server. See

# security_level.txt for details.

   security = user

# You may wish to use password encryption. Please read ENCRYPTION.txt,

# Win95.txt and WinNT.txt in the Samba documentation. Do not enable this

# option unless you have read those documents

   encrypt passwords = true

# Using the following line enables you to customise your configuration

# on a per machine basis. The %m gets replaced with the netbios name

# of the machine that is connecting

;   include = /home/samba/etc/smb.conf.%m

# Most people will find that this option gives better performance.

# See speed.txt and the manual pages for details

# You may want to add the following on a Linux system:

#         SO_RCVBUF=8192 SO_SNDBUF=8192

   socket options = TCP_NODELAY

# --- Browser Control Options ---

# Please _read_ BROWSING.txt and set the next four parameters according

# to your network setup. The defaults are specified below (commented

# out.) It's important that you read BROWSING.txt so you don't break

# browsing in your network!

# set local master to no if you don't want Samba to become a master

# browser on your network. Otherwise the normal election rules apply

;   local master = yes

# OS Level determines the precedence of this server in master browser

# elections. The default value should be reasonable

;   os level = 20

# Domain Master specifies Samba to be the Domain Master Browser. This

# allows Samba to collate browse lists between subnets. Don't use this

# if you already have a Windows NT domain controller doing this job

;   domain master = auto

# Preferred Master causes Samba to force a local browser election on startup

# and gives it a slightly higher chance of winning the election

;   preferred master = auto

# --- End of Browser Control Options ---

# Windows Internet Name Serving Support Section:

# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server

;   wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client

# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both

;   wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.

   dns proxy = no

# What naming service and in what order should we use to resolve host names

# to IP addresses

;   name resolve order = lmhosts host wins bcast

# Name mangling options

;   preserve case = yes

;   short preserve case = yes

# This boolean parameter controlls whether Samba attempts to sync. the Unix

# password with the SMB password when the encrypted SMB password in the

# /etc/samba/smbpasswd file is changed.

;   unix password sync = false

# For Unix password sync. to work on a Debian GNU/Linux system, the following

# parameters must be set (thanks to Augustin Luton <aluton@hybrigenics.fr> for

# sending the correct chat script for the passwd program in Debian Potato).

   passwd program = /usr/bin/passwd %u

   passwd chat = *Enter\snew\sUNIX\spassword:* %n\n *Retype\snew\sUNIX\spassword:* %n\n .

# This boolean controls whether PAM will be used for password changes

# when requested by an SMB client instead of the program listed in

# 'passwd program'. The default is 'no'.

;   pam password change = no

# The following parameter is useful only if you have the linpopup package

# installed. The samba maintainer and the linpopup maintainer are

# working to ease installation and configuration of linpopup and samba.

;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &

   obey pam restrictions = yes

# Some defaults for winbind (make sure you're not using the ranges

# for something else.)

;   winbind uid = 10000-20000

;   winbind gid = 10000-20000

;   template shell = /bin/bash

#======================= Share Definitions =======================

[homes]

   comment = Home Directories

   browseable = yes

# By default, the home directories are exported read-only. Change next

# parameter to 'yes' if you want to be able to write to them.

   writable = no

# File creation mask is set to 0700 for security reasons. If you want to

# create files with group=rw permissions, set next parameter to 0775.

   create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to

# create dirs. with group=rw permissions, set next parameter to 0775.

   directory mask = 0700

# Un-comment the following and create the netlogon directory for Domain Logons

# (you need to configure Samba to act as a domain controller too.)

;[netlogon]

;   comment = Network Logon Service

;   path = /home/samba/netlogon

;   guest ok = yes

;   writable = no

;   share modes = no

[printers]

   comment = All Printers

   browseable = no

   path = /tmp

   printable = yes

   public = no

   writable = no

   create mode = 0700

# A sample share for sharing your CD-ROM with others.

;[cdrom]

;   comment = Samba server's CD-ROM

;   writable = no

;   locking = no

;   path = /cdrom

;   public = yes

# The next two parameters show how to auto-mount a CD-ROM when the

#       cdrom share is accesed. For this to work /etc/fstab must contain

#       an entry like this:

#

#       /dev/scd0   /cdrom  iso9660 defaults,noauto,ro,user   0 0

#

# The CD-ROM gets unmounted automatically after the connection to the

#

# If you don't want to use auto-mounting/unmounting make sure the CD

#       is mounted on /cdrom

#

;   preexec = /bin/mount /cdrom

;   postexec = /bin/umount /cdrom

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.644 / Virus Database: 412 - Release Date: 3/26/2004