On Fri, Mar 19, 2004 at 09:59:30AM -0800, Rodney D. Myers wrote:
> All of the correct modules are being loaded, but when I attempt to run
> "/etc/init.d/pcmcia start', the process just hangs, sitting at this
> message;
>
> Starting PCMCIA Services: Intel PCIC probe: Not Found
> using yenta_socket instead of i82365
> cs: cb_alloc (bus 3):vendor 0x115d, device 0x0003
> PCI: Enabling device 03:00.0 (0000 -> 0x0003)
> eth0: Xircom CardBus revision 3 at irq 10
> PCI: Enabling device 03:00.1 (0000 -> 0003)
> ttyS04 at port 0x4080 (irq = 10 ) is a 16550A
> cardmgr[408]: watching 2 sockets
> cs: IO probe 0x0c00-0x0cff: clean
> cs: IO probe 0x0800-0x08ff:
Remove the 0x800-0x8ff port range from the included ports in
/etc/pcmcia/config.opts.
Nate
--
" And God shall wipe away all tears from their eyes;
and there shall be no more death, neither sorrow, nor
crying, neither shall there be any more pain: for the
former things are passed away."
Revelations 21:4
Nathan J. Malmberg <malmberg2.5@insightbb.com> GNUPG ID: 8A9B426E
The attachment is a digital signature. Get my key at subkeys.pgp.net.
Attachment:
signature.asc
Description: Digital signature