setup second nic on debian/powerpc not succeeding
hi
tried to set up a second nic for my debian woody on a powerpc
the first nic was configured during installation and is working fine
i added the second nic (dlink de-528) with the appropriate driver (ne2k-pci)
booting up, the card seems to be detected and ifconfig gives me the
following:
eth0 Link encap:Ethernet HWaddr 00:05:02:C9:BA:CC
inet addr:192.168.1.3 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3527 errors:1 dropped:1 overruns:0 frame:1
TX packets:862 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:326800 (319.1 KiB) TX bytes:148737 (145.2 KiB)
Interrupt:42 Base address:0x8000
eth1 Link encap:Ethernet HWaddr 00:50:BA:B3:1D:31
inet addr:192.168.1.8 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:69 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:5484 (5.3 KiB) TX bytes:0 (0.0 b)
Interrupt:24 Base address:0x1060
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:45 errors:0 dropped:0 overruns:0 frame:0
TX packets:45 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:3191 (3.1 KiB) TX bytes:3191 (3.1 KiB)
tap0 Link encap:Ethernet HWaddr FE:FD:00:00:00:00
inet addr:192.168.0.1 Bcast:0.0.0.0 Mask:255.255.255.255
UP BROADCAST RUNNING NOARP MULTICAST MTU:1492 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:5
however pinging to 192.168.1.8 gives me: "Destination Host Unreachable"
any ideas?
thanks,
joey
ASR
_________________________________________________________________
Reply to: