re: unable to load e1000 driver

[Hamid <debian_list@yahoo.com>]

> Hi,
>
> I'm running debian woody and installed an Intel E1000 card.
> lspci -v tells me:
> 00:08.0 Ethernet controller: Intel Corp.: Unknown device 1076
>        Subsystem: Intel Corp.: Unknown device 1113
>         Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 11
>         Memory at de000000 (32-bit, non-prefetchable) [size=128K]
>         Memory at de020000 (32-bit, non-prefetchable) [size=128K]
>         I/O ports at 9000 [size=64]
>         Expansion ROM at <unassigned> [disabled] [size=128K]
>         Capabilities: [dc] Power Management version 2
>         Capabilities: [e4] #07 [0002]
>         Capabilities: [f0] Message Signalled Interrupts: 64bit+ Queue=0/0
> Enable-
>
> But insmod e1000 complains:
> Using /lib/modules/2.4.24/kernel/drivers/net/e1000.o
> /lib/modules/2.4.24/kernel/drivers/net/e1000.o: init_module: No such 
> device
>
> Nothing related I found on the web helped (kernel update, noapic 
> acpi=off).
>
> The e1000 driver version is 4.3.15.
>
> Any help or suggestions?
> Thanks a lot,
> -- Bernd

Hi

I was wondering if you were able to resolve your problem.
I have the same problem but in my case this is happenning in 
debian-installer :(
So I even can't go further since I am trying to install off one of the 
mirrors.

But my card is an onboard one from Gigabyte (motherboard is GA8KNXP)

Thanks
Hamid

--
Using M2, Opera's revolutionary e-mail client: http://www.opera.com/m2/