Re: problems with cdwriter on woody-system
On Tue, 11 Nov 2003 09:20:20 +0100, Palfalvi Richard wrote:
> Hi out there!
>
> I 've got the following problem: I built in a Plextor-CD-Writer in my Desktop-PC (with Woody on it) but
> the machine (kernel) do not recognize it.
...
> Module Size Used by Not tainted
> ipt_MASQUERADE 1216 1 (autoclean)
> ipt_LOG 3136 1 (autoclean)
> ipt_state 608 1 (autoclean)
> iptable_filter 1728 1 (autoclean)
> ip_nat_ftp 2944 0 (unused)
> iptable_nat 12660 2 [ipt_MASQUERADE ip_nat_ftp]
> ip_conntrack_irc 2496 0 (unused)
> ip_conntrack_ftp 3200 0 (unused)
> ip_conntrack 12684 4 [ipt_MASQUERADE ipt_state ip_nat_ftp iptable_nat ip_conntrack_irc ip_conntrack_ftp]
> ip_tables 10432 7 [ipt_MASQUERADE ipt_LOG ipt_state iptable_filter iptable_nat]
> parport_pc 25704 1 (autoclean)
> lp 6912 0 (autoclean)
> sg 24452 0 (unused)
> ide-scsi 7488 0
> ne 6368 1
> 3c509 7968 1
> isa-pnp 27432 0 [ne 3c509]
> parport 21728 1 [parport_pc lp]
...
I think you're missing some module or other. Here's my lsmod:
Module Size Used by Tainted: P
snd-pcm-oss 39556 1 (autoclean)
snd-mixer-oss 13592 1 (autoclean) [snd-pcm-oss]
agpgart 21032 3 (autoclean)
nvidia 1630080 11 (autoclean)
apm 10156 1 (autoclean)
snd-cs46xx 70472 2
snd-pcm 60900 0 [snd-pcm-oss snd-cs46xx]
snd-timer 14244 0 [snd-pcm]
snd-ac97-codec 41368 0 [snd-cs46xx]
snd-page-alloc 6356 0 [snd-cs46xx snd-pcm]
snd-rawmidi 13312 0 [snd-cs46xx]
snd-seq-device 4176 0 [snd-rawmidi]
snd 29348 0 [snd-pcm-oss snd-mixer-oss snd-cs46xx snd-pcm snd-timer snd-ac97-codec snd-rawmidi snd-seq-device]
soundcore 3652 6 [snd]
serial 49828 0 (autoclean)
isa-pnp 32560 0 (autoclean) [serial]
8139too 15240 1 (autoclean)
mii 2400 0 (autoclean) [8139too]
crc32 2880 0 (autoclean) [8139too]
sg 28092 0 (unused)
ide-scsi 10320 0
ide-cd 32352 0
ide-floppy 14044 0
usb-uhci 23600 0 (unused)
dsbr100 4348 0 (unused)
usbcore 62572 0 [usb-uhci dsbr100]
videodev 6048 1 [dsbr100]
sr_mod 15896 0
scsi_mod 58324 3 [sg ide-scsi sr_mod]
cdrom 28512 0 [ide-cd sr_mod]
I think you need scsi_mod and sr_mod (someone correct me if I'm wrong). I
have also included the relevant bits from dmesg below.
ide-cd: ignoring drive hdc
hdd: attached ide-cdrom driver.
hdd: ATAPI 40X DVD-ROM drive, 256kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
hdc: attached ide-scsi driver.
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: PLEXTOR Model: CD-R PX-W1210A Rev: 1.10
Type: CD-ROM ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
I think you also need to stick "ide-cd ignore=hdc" in
/etc/modutils/aliases too, (and run update-modules after) since your
ide-cd modules is loaded before your ide-scsi module.
Alternatiely, you can swap the order of ide-scsi and ide-cd in
/etc/modules.
hope that helps
duck
Reply to: