Re: clamscan avavis spamassassin with exim4 on sarge
----- Original Message -----
From: "Hanasaki JiJi" <hanasaki@hanaden.com>
To: "LIST - Debian-User" <debian-user@lists.debian.org>
Sent: Saturday, November 08, 2003 5:33 AM
Subject: clamscan avavis spamassassin with exim4 on sarge
> Anyone have/working on integration of these?
>
> clam spamc and amavis are installed however, they dont seem to update
> the /etc/exim4/conf.d
>
> thank you.
My exim 4 config here attached..
Change the placeholders like these <CHANGETOYOURDOMAIN>
If you test it, be sure to shutdown fetchmail ( so you won't loose mail)
or use "keep" in the fetchmail config and try first to send a mail
from the command line like this
========== snippet =========
exim -v user@domain
<some message, could be empty>
.
=========================
Regards,
Benedict
#########
# WARNING WARNING WARNING
# WARNING WARNING WARNING
# WARNING WARNING WARNING
# WARNING WARNING WARNING
# WARNING WARNING WARNING
# this file is generated dynamically from the files in
# CONFDIR/conf.d/ and /etc/exim4/update-exim4.conf.conf
# Any changes you make here will be lost.
# See /usr/share/doc/exim4-base/README.Debian and update-exim4.conf(8)
# for instructions of customization.
# WARNING WARNING WARNING
# WARNING WARNING WARNING
# WARNING WARNING WARNING
# WARNING WARNING WARNING
# WARNING WARNING WARNING
#########
exim_path = /usr/sbin/exim4
CONFDIR = /etc/exim4
MESSAGE_SIZE_LIMIT = 10M
.ifdef DC_minimaldns
primary_hostname = <CHANGETOYOURDOMAIN>
.else
.endif
domainlist local_domains =
@:<CHANGETOYOURDOMAIN>:localhost:<SERVER.YOURDOMAIN>
domainlist relay_to_domains =
hostlist relay_from_hosts = 127.0.0.1 : ::::1 : 192.168.0.0/24
qualify_domain = camelot
DCreadhost =
DCsmarthost = <YOUR.ISP.MAIL.OUT>
local_interfaces = 127.0.0.1 : 127.0.0.1.10025 : 192.168.0.1
LOCAL_DELIVERY=maildir_home
gecos_pattern = ^([^,:]*)
gecos_name = $1
DCconfig_smarthost = 1
acl_smtp_rcpt = acl_check_rcpt
acl_smtp_data = acl_check_data
.ifndef DC_minimaldns
host_lookup = *
.endif
rfc1413_hosts = *
rfc1413_query_timeout = 30s
smtp_accept_queue_per_connection = 10
smtp_accept_max = 6
smtp_accept_queue = 5
queue_only_load = 20
deliver_queue_load_max = 40
ignore_bounce_errors_after = 1d
timeout_frozen_after = 2d
freeze_tell = postmaster
trusted_users = uucp
never_users = root
begin acl
acl_whitelist_local_deny:
accept hosts = ${if exists{CONFDIR/local_host_whitelist}\
{CONFDIR/local_host_whitelist}\
{}}
accept senders = ${if exists{CONFDIR/local_sender_whitelist}\
{CONFDIR/local_sender_whitelist}\
{}}
acl_check_rcpt:
accept hosts = :
deny local_parts = ^.*[@%!/|] : ^\\.
accept local_parts = postmaster
domains = +local_domains
deny message = sender envelope address $sender_address is locally
blacklisted here. If you think this is wrong, get in touch with
postmaster
!acl = acl_whitelist_local_deny
senders = ${if exists{CONFDIR/local_sender_blacklist}\
{CONFDIR/local_sender_blacklist}\
{}}
deny message = sender IP address $sender_host_address is locally
blacklisted here. If you think this is wrong, get in touch with
postmaster
!acl = acl_whitelist_local_deny
hosts = ${if exists{CONFDIR/local_host_blacklist}\
{CONFDIR/local_host_blacklist}\
{}}
accept domains = +local_domains
endpass
message = unknown user
verify = recipient
accept domains = +relay_to_domains
endpass
message = unrouteable address
verify = recipient
accept hosts = +relay_from_hosts
accept authenticated = *
deny message = relay not permitted
acl_check_data:
accept
begin routers
.ifdef DCconfig_internet
dnslookup_relay_to_domains:
driver = dnslookup
domains = ! +local_domains : +relay_to_domains
transport = remote_smtp
same_domain_copy_routing = yes
no_more
dnslookup:
driver = dnslookup
domains = ! +local_domains
transport = remote_smtp
same_domain_copy_routing = yes
ignore_target_hosts = 0.0.0.0 : 127.0.0.0/8 : 192.168.0.0/16 :\
172.16.0.0/12 : 10.0.0.0/8 : 169.254.0.0/16
no_more
.endif
.ifdef DCconfig_local
nonlocal:
driver = redirect
allow_fail
data = :fail: Mailing to remote domains not supported
no_more
domains = ! +local_domains
.endif
.ifdef DCconfig_smarthost DCconfig_satellite
smarthost:
driver = manualroute
domains = ! +local_domains
transport = remote_smtp
route_list = * DCsmarthost
host_find_failed = defer
same_domain_copy_routing = yes
no_more
.endif
real_local:
debug_print = "R: real_local for $local_part@$domain"
driver = accept
local_part_prefix = real-
check_local_user
transport = LOCAL_DELIVERY
system_aliases:
debug_print = "R: system_aliases for $local_part@$domain"
driver = redirect
allow_fail
allow_defer
data = ${lookup{$local_part}lsearch{/etc/aliases}}
file_transport = address_file
pipe_transport = address_pipe
.ifdef DCconfig_satellite
hub_user:
debug_print = "R: hub_user for $local_part@$domain"
driver = redirect
data = ${local_part}@DCreadhost
check_local_user
.endif
userforward:
debug_print = "R: userforward for $local_part@$domain"
driver = redirect
check_local_user
file = $home/.forward
no_verify
no_expn
check_ancestor
allow_filter
directory_transport = address_directory
file_transport = address_file
pipe_transport = address_pipe
reply_transport = address_reply
skip_syntax_errors
syntax_errors_to = real-$local_part@$domain
syntax_errors_text = \
This is an automatically generated message. An error has\n\
been found in your .forward file. Details of the error are\n\
reported below. While this error persists, you will receive\n\
a copy of this message for every message that is addressed\n\
to you. If your .forward file is a filter file, or if it is\n\
a non-filter file containing no valid forwarding addresses,\n\
a copy of each incoming message will be put in your normal\n\
mailbox. If a non-filter file contains at least one valid\n\
forwarding address, forwarding to the valid addresses will\n\
happen, and those will be the only deliveries that occur.
spamcheck_router:
no_verify
check_local_user
condition = "${if and { {!def:h_X-Spam-Flag:} \
{!eq {$received_protocol}{spam-scanned}} \
{!match {h_X-Amavis-Alert}{^INFECTED}} } {1}{0}}"
driver = accept
transport = spamcheck
amavis:
driver = manualroute
condition = "${if or { {eq {$interface_port}{10025}} \
{def:h_X-Virus-Scanned:} \
} {0}{1}}"
transport = amavis
route_list = "* localhost byname"
self = send
procmail:
debug_print = "R: procmail for $local_part@$domain"
driver = accept
check_local_user
transport = procmail_pipe
require_files = ${local_part}:${home}/.procmailrc:+/usr/bin/procmail
no_verify
no_expn
maildrop:
debug_print = "R: maildrop for $local_part@$domain"
driver = accept
check_local_user
transport = maildrop_pipe
require_files = ${local_part}:${home}/.mailfilter:+/usr/bin/maildrop
no_verify
no_expn
local_user:
debug_print = "R: local_user for $local_part@$domain"
driver = accept
check_local_user
transport = LOCAL_DELIVERY
begin transports
address_file:
debug_print = "T: address_file for $local_part@$domain"
driver = appendfile
delivery_date_add
envelope_to_add
return_path_add
address_pipe:
debug_print = "T: address_pipe for $local_part@$domain"
driver = pipe
return_fail_output
address_reply:
debug_print = "T: autoreply for $local_part@$domain"
driver = autoreply
mail_spool:
debug_print = "T: appendfile for $local_part@$domain"
driver = appendfile
file = /var/mail/$local_part
delivery_date_add
envelope_to_add
return_path_add
group = mail
mode = 0660
mode_fail_narrower = false
maildir_home:
debug_print = "T: maildir_home for $local_part@$domain"
driver = appendfile
directory = $home/Maildir
delivery_date_add
envelope_to_add
return_path_add
mode = 0600
mode_fail_narrower = false
maildir_format
maildrop_pipe:
debug_print = "T: maildrop_pipe for $local_part@$domain"
driver = pipe
path = "/bin:/usr/bin:/usr/local/bin"
command = "/usr/bin/maildrop"
return_path_add
delivery_date_add
envelope_to_add
procmail_pipe:
debug_print = "T: procmail_pipe for $local_part@$domain"
driver = pipe
path = "/bin:/usr/bin:/usr/local/bin"
command = "/usr/bin/procmail"
return_path_add
delivery_date_add
envelope_to_add
remote_smtp:
debug_print = "T: remote_smtp for $local_part@$domain"
driver = smtp
hosts_try_auth = DCsmarthost
spamcheck:
debug_print = "T: spamassassin_pipe for $local_part@$domain"
driver = pipe
command = /usr/sbin/exim4 -oMr spam-scanned -bS
use_bsmtp = true
transport_filter = /usr/bin/spamc
home_directory = /tmp
current_directory = /tmp
group = mail
user = mail
return_fail_output = true
return_path_add = false
message_prefix =
message_suffix =
amavis:
driver = smtp
port = 10024
allow_localhost
address_directory:
debug_print = "T: address_directory for $local_part@$domain"
driver = appendfile
envelope_to_add = true
return_path_add = true
check_string = ""
escape_string = ""
maildir_format
begin retry
* * F,2h,15m; G,16h,1h,1.5; F,2d,6h
begin rewrite
*@+local_domains ${lookup{${local_part}}lsearch{/etc/email-addresses}\
{$value}fail} Ffrs
*@+local_domains "${if exists {CONFDIR/email-addresses}\
{${lookup{${local_part}}lsearch{CONFDIR/email-addresses}\
{$value}fail}}fail}" Ffrs
.ifdef DCconfig_satellite
*@+local_domains ${local_part}@DCreadhost Ffr
.endif
begin authenticators
login:
driver = plaintext
public_name = LOGIN
client_send = ":
${extract{1}{::}{${lookup{$host}lsearch*{CONFDIR/passwd.client}{$value}f
ail}}} :
${extract{2}{::}{${lookup{$host}lsearch*{CONFDIR/passwd.client}{$value}f
ail}}}"
Reply to: