[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: CD writer





Sidney Brooks wrote:
--- Naota <naota@tampabay.rr.com> wrote:


Sidney Brooks wrote:

I have done all the things described below and it
still does not work.

Okay, how about this, then:
Please post the contents of /etc/lilo.conf,
/etc/modules.conf, and /etc/rc.d/rc.modules.
We'll be able to help more after that.

All the best.


This is the /etc/lilo.conf generated by the new
kernel:

boot=/dev/hda4
root=/dev/hda4
compact
install=/boot/boot.b
map=/boot/map
vga=normal
delay=20
image=/vmlinuz
label = Linux
read-only
append="quiet hdc=ide-scsi"

_____________________________________________________

This is modules.conf:

### This file is automatically generated by
update-modules"
#
# Please do not edit this file directly. If you want
to change or add
# anything please take a look at the files in
/etc/modutils and read
# the manpage for update-modules.
#
### update-modules: start processing
/etc/modutils/0keep
# DO NOT MODIFY THIS FILE!
# This file is not marked as conffile to make sure if
you upgrade modutils
# it will be restored in case some modifications have
been made.
#
# The keep command is necessary to prevent insmod and
friends from ignoring
# the builtin defaults of a path-statement is
encountered. Until all other
# packages use the new `add path'-statement this
keep-statement is essential
# to keep your system working
keep

### update-modules: end processing /etc/modutils/0keep

### update-modules: start processing
/etc/modutils/actions
# Special actions that are needed for some modules

# The BTTV module does not load the tuner module
automatically,
# so do that in here
post-install bttv insmod tuner
post-remove bttv rmmod tuner


### update-modules: end processing
/etc/modutils/actions

### update-modules: start processing
/etc/modutils/aliases
# Aliases to tell insmod/modprobe which modules to use


# Uncomment the network protocols you don't want
loaded:
# alias net-pf-1 off		# Unix
# alias net-pf-2 off		# IPv4
# alias net-pf-3 off		# Amateur Radio AX.25
# alias net-pf-4 off		# IPX
# alias net-pf-5 off		# DDP / appletalk
# alias net-pf-6 off		# Amateur Radio NET/ROM
# alias net-pf-9 off		# X.25
# alias net-pf-10 off		# IPv6
# alias net-pf-11 off		# ROSE / Amateur Radio X.25 PLP
# alias net-pf-19 off		# Acorn Econet

alias char-major-10-175	agpgart
alias char-major-10-200	tun
alias char-major-81	bttv
alias char-major-108	ppp_generic
alias /dev/ppp		ppp_generic
alias tty-ldisc-3	ppp_async
alias tty-ldisc-14	ppp_synctty
alias ppp-compress-21	bsd_comp
alias ppp-compress-24	ppp_deflate
alias ppp-compress-26	ppp_deflate

# Crypto modules (see http://www.kerneli.org/)
alias loop-xfer-gen-0	loop_gen
alias loop-xfer-3	loop_fish2
alias loop-xfer-gen-10	loop_gen
alias cipher-2		des
alias cipher-3		fish2
alias cipher-4		blowfish
alias cipher-6		idea
alias cipher-7		serp6f
alias cipher-8		mars6
alias cipher-11		rc62
alias cipher-15		dfc2
alias cipher-16		rijndael
alias cipher-17		rc5


### update-modules: end processing
/etc/modutils/aliases

### update-modules: start processing /etc/modutils/apm
alias char-major-10-134	apm
alias /dev/apm_bios		/dev/misc/apm_bios
alias /dev/misc/apm_bios	apm

### update-modules: end processing /etc/modutils/apm

### update-modules: start processing
/etc/modutils/diald
alias tap0	ethertap
options tap0	-o tap0 unit=0
alias tap1	ethertap
options tap1	-o tap1 unit=1

### update-modules: end processing /etc/modutils/diald

### update-modules: start processing
/etc/modutils/irda
alias tty-ldisc-11 irtty
alias char-major-161 ircomm-tty
alias char-major-60 ircomm_tty

# for dongle
alias irda-dongle-0 tekram
alias irda-dongle-1 esi
alias irda-dongle-2 actisys
alias irda-dongle-3 actisys
alias irda-dongle-4 girbil
alias irda-dongle-5 litelink
alias irda-dongle-6 airport
alias irda-dongle-7 old_belkin

# for FIR device
#alias irda0 nsc-ircc dongle_id=0x09

### update-modules: end processing /etc/modutils/irda

### update-modules: start processing
/etc/modutils/paths
# This file contains a list of paths that modprobe
should scan,
# beside the once that are compiled into the modutils
tools
# themselves.


### update-modules: end processing /etc/modutils/paths

### update-modules: start processing /etc/modutils/ppp
alias /dev/ppp          ppp_generic
alias char-major-108    ppp_generic
alias tty-ldisc-3 ppp_async alias tty-ldisc-14 ppp_synctty alias ppp-compress-21 bsd_comp alias ppp-compress-24 ppp_deflate
alias ppp-compress-26   ppp_deflate

### update-modules: end processing /etc/modutils/ppp

### update-modules: start processing
/etc/modutils/setserial
#
# This is what I wanted to do, but logger is in
/usr/bin, which isn't loaded
# when the module is first loaded into the kernel at
boot time!
#
#post-install serial /etc/init.d/setserial start |
logger -p daemon.info -t "setserial-module reload"
#pre-remove serial /etc/init.d/setserial stop | logger
-p daemon.info -t "setserial-module uload"
#
alias /dev/tts          serial
alias /dev/tts/0        serial
alias /dev/tts/1        serial
alias /dev/tts/2        serial
alias /dev/tts/3        serial
post-install serial /etc/init.d/setserial modload >
/dev/null 2> /dev/null
pre-remove serial /etc/init.d/setserial modsave  >
/dev/null 2> /dev/null

### update-modules: end processing
/etc/modutils/setserial

### update-modules: start processing
/etc/modutils/toshutils
alias char-major-10-181 toshiba

### update-modules: end processing
/etc/modutils/toshutils

### update-modules: start processing
/etc/modutils/arch/i386
alias parport_lowlevel parport_pc
alias char-major-10-144 nvram
alias binfmt-0064 binfmt_aout
alias char-major-10-135 rtc

### update-modules: end processing
/etc/modutils/arch/i386
______________________________________________________

There is no /etc/rc.d/rc.modules. There is just one
thing in /etc/rc.d, the directory /init.d which
contains one file modules.init:
#Modules initialization
#
#Start up the module auto-loading daemon
/sbin/kerneld

#Mount all currently unmounted auto-mounted partitions
/sbin/mount -a

Finally, since I know that people cannot keep up with
the whole thread, I do not boot from the lilo.conf
above, but from lilo on another partition. I tried to
copy the contents of the lilo above to the working
lilo. However, I had to cancel the line hdc=ide-scsi
because I could not use my cdrom with the line
present.

sidney

Okay, the following configurations are not perfect, but do allow me to burn with -dev=ATAPI:X,X,X.
Here is the important part of my /etc/lilo.conf:

append="hdd=ide-scsi"

Here is my /etc/modules.conf:

# tell ide-cd module to ignore hdd
options ide-cd ignore=hdd	
# load sr_mod upon access of scd0
alias  scd0 sr_mod			
# load ide-scsi before sg
pre-install sg modprobe ide-scsi	
# load ide-scsi before sr_mod
pre-install sr_mod modprobe ide-scsi
# load ide-cd before ide-scsi
pre-install ide-scsi modprobe ide-cd

Here's my rc.local:

insmod ide-scsi

I'll tell you this: everything in /etc/modules.conf that I show as being uncommented, I have commented in my 'actual' modules.conf, because I found that it was unneed with my -dev=ATAPI:X,X,X approach. All those extra configs I posted above are at linuxquestions.

Can you please tell me what happens when you do

cdrecord dev=ATAPI -scanbus

Also, what  kind of burner have you?
I hope my advice isn't distro specific, because I'm running slackware 9.1. I subscribed to this list the day before I tried installing Woody, and got pissed off...

Take care.



Reply to: