[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: nforce kernel modules



On Mon, Aug 11, 2003 at 11:05:43PM +0100, Antony Gelberg wrote:
> On Mon, Aug 11, 2003 at 03:22:23PM -0600, Jamin W. Collins wrote:
> > 
> > You can try using the i810 alsa module inplace of the nvaudio module
> > (at least it works here).
> 
> That's interesting.  My friend has an nforce2 mobo, and the alsa i810
> module doesn't want to load.  See:
> http://lists.debian.org/debian-user/2003/debian-user-200308/msg01696.html
> 
> The OSS i810 in 2.4.21 loaded, but kept locking up.  How did you get
> the alsa driver to load?

Just grabbed the alsa-source package (v0.9.2 is what I have installed),
extracted it and used make-kpkg to build it for my kernel (2.4.20 with a
few patches).  Then installed the resulting debs, which created the
needed /etc/modutils/alsa file.  From there it's just worked.

$ lspci | grep audio
00:05.0 Multimedia audio controller: nVidia Corporation nForce
MultiMedia audio [Via VT82C686B] (rev a2)
00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97
Audio Controler (MCP) (rev a1)

$ /sbin/lsmod | grep snd-
snd-seq-oss            24160   0 (unused)
snd-seq-midi-event      2952   0 [snd-seq-oss]
snd-seq                38096   2 [snd-seq-oss snd-seq-midi-event]
snd-pcm-oss            37860   0
snd-mixer-oss          11544   2 [snd-pcm-oss]
snd-intel8x0           16804   2
snd-pcm                55424   0 [snd-pcm-oss snd-intel8x0]
snd-timer              14248   0 [snd-seq snd-pcm]
snd-ac97-codec         31488   0 [snd-intel8x0]
snd-page-alloc          4160   0 [snd-intel8x0 snd-pcm]
snd-mpu401-uart         3040   0 [snd-intel8x0]
snd-rawmidi            12416   0 [snd-mpu401-uart]
snd-seq-device          3940   0 [snd-seq-oss snd-seq snd-rawmidi]
snd                    28484   0 [snd-seq-oss snd-seq-midi-event snd-seq
snd-pcm-oss snd-mixer-oss snd-intel8x0 snd-pcm snd-timer snd-ac97-codec
snd-mpu401-uart snd-rawmidi snd-seq-device]

I did have a problem where the machine would lockup on startup under
certain conditions, but I traced that back to a conflict with USB that
reared it's head if the USB modules tried to load via /etc/modules, so I
simply removed them from there and allow hotplug to load them later.

-- 
Jamin W. Collins

To be nobody but yourself when the whole world is trying it's best night
and day to make you everybody else is to fight the hardest battle any
human being will fight. -- E.E. Cummings



Reply to: