Re: i810 problem
Hi,
You're using version 4.1.0 of X which may not support your hardware
properly.
My Dell 2350 has the Intel 845GL chipset and when I installed debian
I couldn't get X to work either. It turns out that the chipset is only
supported by version 4.3.0 of X which can be downloaded and installed from
www.xfree86.org. Perhaps the new version my solve your problem also.
... salman
On Mon, 21 Jul 2003, J. Smith wrote:
> i have i810 board and Debian 3.0, but X does not work,
> below is output by xinit:
>
> warning: process set to nice value 0 instead of -10 as
> requested
>
> This is a pre-release version of XFree86, and is not
> supported in any
> way. Bugs may be reported to XFree86@XFree86.Org and
> patches submitted
> to fixes@XFree86.Org. Before reporting bugs in
> pre-release versions,
> please check the latest version in the XFree86 CVS
> repository
> (http://www.XFree86.Org/cvs)
>
> XFree86 Version 4.1.0.1 / X Window System
> (protocol Version 11, revision 0, vendor release 6510)
> Release Date: 21 December 2001
> If the server is older than 6-12 months, or if your
> card is
> newer than the above date, look for a newer version
> before
> reporting problems. (See http://www.XFree86.Org/FAQ)
> Build Operating System: Linux 2.4.17 i686 [ELF]
> Module Loader present
> (==) Log file: "/var/log/XFree86.0.log", Time: Tue Jul
> 22 02:41:45 2003
> (==) Using config file: "/etc/X11/XF86Config-4"
> Markers: (--) probed, (**) from config file, (==)
> default setting,
> (++) from command line, (!!) notice, (II)
> informational,
> (WW) warning, (EE) error, (NI) not
> implemented, (??) unknown.
> (==) ServerLayout "Default Layout"
> (**) |-->Screen "Default Screen" (0)
> (**) | |-->Monitor "Generic Monitor"
> (**) | |-->Device "Generic Video Card"
> (**) |-->Input Device "Generic Keyboard"
> (**) XKB: rules: "xfree86"
> (**) XKB: model: "pc104"
> (**) XKB: layout: "us"
> (**) |-->Input Device "Configured Mouse"
> (**) |-->Input Device "Generic Mouse"
> (WW) The directory "/usr/lib/X11/fonts/cyrillic" does
> not exist.
> Entry deleted from font path.
> (WW) The directory "/usr/lib/X11/fonts/100dpi/" does
> not exist.
> Entry deleted from font path.
> (WW) The directory "/usr/lib/X11/fonts/75dpi/" does
> not exist.
> Entry deleted from font path.
> (WW) The directory "/usr/lib/X11/fonts/Type1" does not
> exist.
> Entry deleted from font path.
> (WW) The directory "/usr/lib/X11/fonts/Speedo" does
> not exist.
> Entry deleted from font path.
> (WW) The directory "/usr/lib/X11/fonts/100dpi" does
> not exist.
> Entry deleted from font path.
> (WW) The directory "/usr/lib/X11/fonts/75dpi" does not
> exist.
> Entry deleted from font path.
> (**) FontPath set to
> "unix/:7100,/usr/lib/X11/fonts/misc"
> (==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
> (==) ModulePath set to "/usr/X11R6/lib/modules"
> (--) using VT number 7
>
> (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
> (II) Module bitmap: vendor="The XFree86 Project"
> compiled for 4.1.0.1, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/libpcidata.a
> (II) Module pcidata: vendor="The XFree86 Project"
> compiled for 4.1.0.1, module version = 0.1.0
> (II) Loading /usr/X11R6/lib/modules/libscanpci.a
> (II) Module scanpci: vendor="The XFree86 Project"
> compiled for 4.1.0.1, module version = 0.1.0
> (II) Unloading /usr/X11R6/lib/modules/libscanpci.a
> (--) PCI:*(0:1:0) Intel i810 rev 3, Mem @
> 0xd0000000/26, 0xd6000000/19
> (II) Loading
> /usr/X11R6/lib/modules/extensions/libGLcore.a
> (II) Module GLcore: vendor="The XFree86 Project"
> compiled for 4.1.0.1, module version = 1.0.0
> (II) Loading
> /usr/X11R6/lib/modules/extensions/libdbe.a
> (II) Module dbe: vendor="The XFree86 Project"
> compiled for 4.1.0.1, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/libddc.a
> (II) Module ddc: vendor="The XFree86 Project"
> compiled for 4.1.0.1, module version = 1.0.0
> (II) Loading
> /usr/X11R6/lib/modules/extensions/libdri.a
> (II) Module dri: vendor="The XFree86 Project"
> compiled for 4.1.0.1, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
> (II) Module drm: vendor="The XFree86 Project"
> compiled for 4.1.0.1, module version = 1.0.0
> (II) Loading
> /usr/X11R6/lib/modules/extensions/libextmod.a
> (II) Module extmod: vendor="The XFree86 Project"
> compiled for 4.1.0.1, module version = 1.0.0
> (II) Loading
> /usr/X11R6/lib/modules/fonts/libfreetype.a
> (II) Module freetype: vendor="The XFree86 Project"
> compiled for 4.1.0.1, module version = 1.1.9
> (II) Loading
> /usr/X11R6/lib/modules/extensions/libglx.a
> (II) Module glx: vendor="The XFree86 Project"
> compiled for 4.1.0.1, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/linux/libint10.a
> (II) Module int10: vendor="The XFree86 Project"
> compiled for 4.1.0.1, module version = 1.0.0
> (II) Loading
> /usr/X11R6/lib/modules/extensions/libpex5.a
> (II) Module pex5: vendor="The XFree86 Project"
> compiled for 4.1.0.1, module version = 1.0.0
> (II) Loading
> /usr/X11R6/lib/modules/extensions/librecord.a
> (II) Module record: vendor="The XFree86 Project"
> compiled for 4.1.0.1, module version = 1.13.0
> (II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
> (II) Module speedo: vendor="The XFree86 Project"
> compiled for 4.1.0.1, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
> (II) Module type1: vendor="The XFree86 Project"
> compiled for 4.1.0.1, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/libvbe.a
> (II) Module vbe: vendor="The XFree86 Project"
> compiled for 4.1.0.1, module version = 1.0.0
> (II) Loading
> /usr/X11R6/lib/modules/extensions/libxie.a
> (II) Module xie: vendor="The XFree86 Project"
> compiled for 4.1.0.1, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/drivers/i810_drv.o
> (II) Module i810: vendor="The XFree86 Project"
> compiled for 4.1.0.1, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
> (II) Module mouse: vendor="The XFree86 Project"
> compiled for 4.1.0.1, module version = 1.0.0
> (II) I810: Driver for Intel i810 chipset: i810,
> i810-dc100, i810e, i815
> (--) Assigning device section with no busID to primary
> device
> (--) Chipset i810 found
> (II) Loading /usr/X11R6/lib/modules/libvgahw.a
> (II) Module vgahw: vendor="The XFree86 Project"
> compiled for 4.1.0.1, module version = 0.1.0
> (**) I810(0): Depth 16, (--) framebuffer bpp 16
> (==) I810(0): RGB weight 565
> (==) I810(0): Default visual is TrueColor
> (II) I810(0): initializing int10
> (II) I810(0): Primary V_BIOS segment is: 0xc000
> (II) I810(0): VESA BIOS detected
> (II) I810(0): VESA VBE DDC supported
> (II) I810(0): Manufacturer: SAM Model: 1035 Serial#:
> 1146106165
> (II) I810(0): Year: 2000 Week: 12
> (II) I810(0): EDID Version: 1.1
> (II) I810(0): Analog Display Input, Input Voltage
> Level: 0.700/0.700 V
> (II) I810(0): Sync: Separate
> (II) I810(0): Max H-Image Size [cm]: horiz.: 28
> vert.: 21
> (II) I810(0): Gamma: 2.12
> (II) I810(0): DPMS capabilities: StandBy Suspend Off;
> RGB/Color Display
> (II) I810(0): redX: 0.632 redY: 0.335 greenX: 0.295
> greenY: 0.593
> (II) I810(0): blueX: 0.143 blueY: 0.066 whiteX:
> 0.283 whiteY: 0.298
> (II) I810(0): Supported VESA Video Modes:
> (II) I810(0): 720x400@70Hz
> (II) I810(0): 720x400@88Hz
> (II) I810(0): 640x480@60Hz
> (II) I810(0): 640x480@67Hz
> (II) I810(0): 640x480@72Hz
> (II) I810(0): 640x480@75Hz
> (II) I810(0): 800x600@56Hz
> (II) I810(0): 800x600@60Hz
> (II) I810(0): 800x600@72Hz
> (II) I810(0): 800x600@75Hz
> (II) I810(0): 832x624@75Hz
> (II) I810(0): 1024x768@87Hz (interlaced)
> (II) I810(0): 1024x768@60Hz
> (II) I810(0): 1024x768@70Hz
> (II) I810(0): 1024x768@75Hz
> (II) I810(0): Manufacturer's mask: 0
> (II) I810(0): Supported Future Video Modes:
> (II) I810(0): #0: hsize: 640 vsize 480 refresh: 85
> vid: 22833
> (II) I810(0): #1: hsize: 800 vsize 600 refresh: 85
> vid: 22853
> (II) I810(0): #2: hsize: 1024 vsize 768 refresh: 75
> vid: 20321
> (II) I810(0): Supported additional Video Mode:
> (II) I810(0): clock: 36.0 MHz Image Size: 267 x 200
> mm
> (II) I810(0): h_active: 640 h_sync: 696 h_sync_end
> 752 h_blank_end 832 h_border: 0
> (II) I810(0): v_active: 480 v_sync: 481 v_sync_end
> 484 v_blanking: 509 v_border: 0
> (II) I810(0): Supported additional Video Mode:
> (II) I810(0): clock: 56.2 MHz Image Size: 267 x 200
> mm
> (II) I810(0): h_active: 800 h_sync: 832 h_sync_end
> 896 h_blank_end 1048 h_border: 0
> (II) I810(0): v_active: 600 v_sync: 601 v_sync_end
> 604 v_blanking: 631 v_border: 0
> (II) I810(0): Ranges: V min: 50 V max: 120 Hz, H min:
> 30 H max: 61 kHz, PixClock max 80 MHz
> (II) I810(0): Serial No: HVCN322176
> (--) I810(0): Chipset: "i810"
> (--) I810(0): Linear framebuffer at 0xD0000000
> (--) I810(0): IO registers at addr 0xD6000000
> (EE) Unable to open /dev/agpgart (No such device)
> (**) I810(0): Will alloc AGP framebuffer: 8192 kByte
> (==) I810(0): Using gamma correction (1.0, 1.0, 1.0)
> (II) I810(0): Generic Monitor: Using hsync value of
> 46.88 kHz
> (II) I810(0): Generic Monitor: Using vrefresh value of
> 75.00 Hz
> (II) I810(0): Clock range: 12.00 to 163.00 MHz
> (II) I810(0): Not using default mode "640x350" (hsync
> out of range)
> (II) I810(0): Not using default mode "640x400" (hsync
> out of range)
> (II) I810(0): Not using default mode "720x400" (hsync
> out of range)
> (II) I810(0): Not using default mode "640x480" (hsync
> out of range)
> (II) I810(0): Not using default mode "640x480" (hsync
> out of range)
> (II) I810(0): Not using default mode "640x480" (hsync
> out of range)
> (II) I810(0): Not using default mode "640x480" (hsync
> out of range)
> (II) I810(0): Not using default mode "800x600" (hsync
> out of range)
> (II) I810(0): Not using default mode "800x600" (hsync
> out of range)
> (II) I810(0): Not using default mode "800x600" (hsync
> out of range)
> (II) I810(0): Not using default mode "800x600" (hsync
> out of range)
> (II) I810(0): Not using default mode "1024x768"
> (unknown reason)
> (II) I810(0): Not using default mode "1024x768" (hsync
> out of range)
> (II) I810(0): Not using default mode "1024x768" (hsync
> out of range)
> (II) I810(0): Not using default mode "1024x768" (hsync
> out of range)
> (II) I810(0): Not using default mode "1024x768" (hsync
> out of range)
> (II) I810(0): Not using default mode "1152x864" (hsync
> out of range)
> (II) I810(0): Not using default mode "1280x960" (hsync
> out of range)
> (II) I810(0): Not using default mode "1280x960" (hsync
> out of range)
> (II) I810(0): Not using default mode "1280x1024"
> (hsync out of range)
> (II) I810(0): Not using default mode "1280x1024"
> (hsync out of range)
> (II) I810(0): Not using default mode "1280x1024"
> (hsync out of range)
> (II) I810(0): Not using default mode "1600x1200"
> (hsync out of range)
> (II) I810(0): Not using default mode "1600x1200" (bad
> mode clock/interlace/doublescan)
> (II) I810(0): Not using default mode "1600x1200" (bad
> mode clock/interlace/doublescan)
> (II) I810(0): Not using default mode "1600x1200" (bad
> mode clock/interlace/doublescan)
> (II) I810(0): Not using default mode "1600x1200" (bad
> mode clock/interlace/doublescan)
> (II) I810(0): Not using default mode "1792x1344" (bad
> mode clock/interlace/doublescan)
> (II) I810(0): Not using default mode "1792x1344" (bad
> mode clock/interlace/doublescan)
> (II) I810(0): Not using default mode "1856x1392" (bad
> mode clock/interlace/doublescan)
> (II) I810(0): Not using default mode "1856x1392" (bad
> mode clock/interlace/doublescan)
> (II) I810(0): Not using default mode "1920x1440" (bad
> mode clock/interlace/doublescan)
> (II) I810(0): Not using default mode "1920x1440" (bad
> mode clock/interlace/doublescan)
> (II) I810(0): Not using default mode "1400x1050"
> (hsync out of range)
> (II) I810(0): Not using default mode "1400x1050"
> (hsync out of range)
> (II) I810(0): Not using mode "640x480" (no mode of
> this name)
> (--) I810(0): Virtual size is 800x600 (pitch 1024)
> (**) I810(0): Default mode "800x600": 49.5 MHz, 46.9
> kHz, 75.0 Hz
> (--) I810(0): Display dimensions: (28, 21) cm
> (--) I810(0): DPI set to (72, 72)
> (II) Loading /usr/X11R6/lib/modules/libfb.a
> (II) Module fb: vendor="The XFree86 Project"
> compiled for 4.1.0.1, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/libxaa.a
> (II) Module xaa: vendor="The XFree86 Project"
> compiled for 4.1.0.1, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/libramdac.a
> (II) Module ramdac: vendor="The XFree86 Project"
> compiled for 4.1.0.1, module version = 0.1.0
> modprobe: Can't locate module i810
> [drm] failed to load kernel module "i810"
> (II) I810(0): [drm] drmOpen failed
> (EE) I810(0): [dri] DRIScreenInit failed. Disabling
> DRI.
> (==) I810(0): Write-combining range
> (0xd0000000,0x4000000)
> (II) I810(0): Setting dot clock to 49.5 MHz [ 0x1f 0x6
> 0x30 ] [ 33 8 3 ]
> (II) I810(0): chose watermark 0x22009000: (tab.freq
> 49.5)
>
> Fatal server error:
> AddScreen/ScreenInit failed for driver 0
>
>
> When reporting a problem related to a server crash,
> please send
> the full server output, not just the last messages.
> This can be found in the log file
> "/var/log/XFree86.0.log".
> Please report problems to submit@bugs.debian.org.
>
> X connection to :0.0 broken (explicit kill or server
> shutdown).
>
>
>
> __________________________________
> Do you Yahoo!?
> The New Yahoo! Search - Faster. Easier. Bingo.
> http://search.yahoo.com
>
>
> --
> To UNSUBSCRIBE, email to debian-user-request@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
>
Reply to: