help with configuring PCMCIA modem
Hi,
I'm trying to configure a Xircom PCMCIA Ethernet/Modem card. The
Ethernet seems to be working OK, but I need more the Modem then the
Ethernet adapter. Here is the relevant section of /var/log/syslog. Is
there any way to deptermine which IRQ is the xirc2ps_cs module trying to
use, and maybe to specify another?
Jul 15 10:54:29 anduin cardmgr[387]: socket 1: Xircom CEM56 Ethernet/Modem
Jul 15 10:54:30 anduin cardmgr[387]: executing: 'modprobe xirc2ps_cs'
Jul 15 10:54:30 anduin kernel: xirc2ps_cs.c 1.31 1998/12/09 19:32:55
(dd9jn+kvh)
Jul 15 10:54:30 anduin cardmgr[387]: executing: 'modprobe serial_cs'
Jul 15 10:54:30 anduin kernel: Serial driver version 5.05c (2001-07-08)
with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
Jul 15 10:54:30 anduin kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A
Jul 15 10:54:30 anduin kernel: ttyS02 at 0x03e8 (irq = 4) is a 16550A
Jul 15 10:54:30 anduin cardmgr[387]: get dev info on socket 1 failed: No
such device
Jul 15 10:54:30 anduin kernel: xirc2ps_cs: RequestIRQ: Resource in use
# cat /proc/interrupts
0: 715900 XT-PIC timer
1: 19015 XT-PIC keyboard
2: 0 XT-PIC cascade
8: 4 XT-PIC rtc
11: 411128 XT-PIC usb-uhci, Texas Instruments PCI4451 PC
card Cardbus Controller, Texas Instruments PCI4451 PC card Cardbus
Controller (#2), eth0, nvidia
12: 202099 XT-PIC PS/2 Mouse
14: 24285 XT-PIC ide0
15: 2 XT-PIC ide1
NMI: 0
LOC: 0
ERR: 0
I'm running unstable on a Dell I8K with a custom compiled Kernel
(2.4.21). Any suggestions?
Thanks
Andreas Fromm
Reply to: