Re: xfree86 'no screens' error on powerpc-sid
On Thu, May 15, 2003 at 12:47:57PM +0100, Gee Law wrote:
> On Thu, May 15, 2003 at 04:06:27AM -0400, Matt Price wrote:
> > hi folks,
> >
> > Can't seem to get my old blue and white g3, with recently installed
> > debian-unstable, to run xfree86. I have an ATI Rage 128 card and a
> > pretty generic "ADI MicroScan" monitor.
> >
> > Below is the relevant portion of the log file (the important bit seems
> > to be at the very end) and I've appended my XF86Config-4 file
> > seperatelz ,for those who are interested.
> > -----> here's the important part <----------------------
> > (II) Loading sub module "fbdevhw"
> > (II) LoadModule: "fbdevhw"
> > (WW) Warning, couldn't open module fbdevhw
> > (II) UnloadModule: "fbdevhw"
> > (EE) R128: Failed to load module "fbdevhw" (module does not exist, 0)
> > (II) UnloadModule: "ati"
> > (II) UnloadModule: "vgahw"
> > (II) Unloading /usr/X11R6/lib/modules/libvgahw.a
> > (II) UnloadModule: "r128"
> > (II) Unloading /usr/X11R6/lib/modules/drivers/r128_drv.o
> > (EE) Screen(s) found, but none have a usable configuration.
> >
> > Fatal server error:
> > no screens found
> > ------------------------------------------------
>
> > Option "UseFBDev" "true"
>
> Set the UseFBDev option to false. Should work.
>
> Regards, Gee.
thanks for the advice, got rid of that error message, but something
else seemsto be wrong. Here's the new logfile (heavilz snipped this
time). The error message is at the top, while the 'faal'exit message
is at the end ofthe file. This seems to be a hardware detection
problem -- which seems odd since this is a pretty standard, and not
especiallz new, card:
----------(snip)--------------
(EE) R128(0): Cannot read V_BIOS (5)
(--) R128(0): Chipset: "ATI Rage 128 RE (PCI)" (ChipID = 0x5245)
(--) R128(0): Linear framebuffer at 0x88000000
(--) R128(0): MMIO registers at 0x80c00000
(--) R128(0): BIOS at 0x80c20000
(--) R128(0): VideoRAM: 16384 kByte (128-bit SDR SGRAM 1:1)
(**) R128(0): Using external CRT for display
(WW) R128(0): Video BIOS not detected in PCI space!
(WW) R128(0): Attempting to read Video BIOS from legacy ISA space!
(WW) R128(0): Video BIOS not found!
(WW) R128(0): Can't determine panel dimensions, and none specified.
Disabling programming of FP registers.
(II) R128(0): PLL parameters: rf=2950 rd=35 min=12500 max=25000; xclk=7501
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(==) R128(0): Using gamma correction (1.0, 1.0, 1.0)
(II) R128(0): adi microscan: Using hsync range of 28.00-50.00 kHz
(II) R128(0): adi microscan: Using vrefresh range of 43.00-75.00 Hz
(II) R128(0): Clock range: 12.50 to 250.00 MHz
(II) R128(0): Not using default mode "640x350" (vrefresh out of range)
(II) R128(0): Not using default mode "320x175" (vrefresh out of range)
(II) R128(0): Not using default mode "640x400" (vrefresh out of range)
(II) R128(0): Not using default mode "320x200" (vrefresh out of range)
-------------(snip)--------------------------
(--) R128(0): Virtual size is 1024x768 (pitch 1024)
(**) R128(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) R128(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
(**) R128(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) R128(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
(**) R128(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) R128(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
(==) R128(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.2.1.1, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.1
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.2.1.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.2.1.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(!!) R128(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0x80c00000 - 0x80c03fff (0x4000) MS[B]
[1] 0 0 0x88000000 - 0x8bffffff (0x4000000) MS[B]
--------------(snip)---------------------------
[28] -1 0 0x00001080 - 0x000010bf (0x40) IX[B]
[29] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[30] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
Symbol drmR128TextureBlit from module /usr/X11R6/lib/modules/drivers/r128_drv.o is unresolved!
Fatal server error:
Caught signal 11. Server aborting
--------------------------
so, anyone know where I should go next?
thanks,
matt
Reply to: