RE: PCI ATA card support
G'day Daniel/All,
The HowTo at http://www.tldp.org/HOWTO/ATA-RAID-HOWTO/index.html was very
helpful. I can now see hde & hdg and format them as fd from the debian
installer BUT (yes another one) How do I make a raid set of these and
format/mount them? I just can't see how/where this is done.
tia
Lindsay
| daniel huhardeaux wrote:
|
| >G'day Daniel,
| >Thx for your reply.
| >
| Welcome
|
| >In RHat the drives are recognised as "hde" and "hdg".
| >In dos (fdisk) they're recognised as one raid drive "Fixed Disk
| Drive Number
| >2".
| >In the raid utility they're recognised as "Drive Number: 0" and "Drive
| >Number: 2"
| >Now I have a primary master as well that would be ide0, so
| they'd be ide1
| >and ide2, Yes?
| >
| If ide1 is disable in bios. If not, they will be ide2 and ide3. If you
| disable both ide0 and ide1 in bios, then they will become ide0 and ide1
|
| >So, could I try what your using at the boot prompt???
| >
| Don't think so
|
| >but!, I would need to specify the 2.4 kernel as well... perhaps:
| >
| >
| >>boot:bf24 ide1=0x9400,0x9802,22 ide2=0x9c00,0xa002,22<
| >>
| >>
| >No, now I need the details of my drives instead of yours
| >(address start,address end,IRQ)
| >Where can I find this info please.
| >
| >
| Read the ATA-Raid Howto. Everything is explained.
|
| Good day.
|
| --
| : ______ ______ ______ ______ ______ __ daniel.huhardeaux@tootai.com
| : /_____// __ // __ //_____// __ // / phone.: +48 32 285 4554
| : / / / /_/ // /_/ / / / / /_/ // / fax....: +48 32 285 4554
| : /_/ /_____//_____/ /_/ /_/ /_//_/ mobile..: +48 602 284 546
|
|
| ---
| Incoming mail is certified Virus Free.
| Checked by AVG anti-virus system (http://www.grisoft.com).
| Version: 6.0.463 / Virus Database: 262 - Release Date: 17/03/2003
|
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.463 / Virus Database: 262 - Release Date: 17/03/2003
Reply to: