Re: Shuttle XPC, model SK41G, Athhon 2100+, 2.4 kernel
On Mon, Mar 17, 2003 at 06:19:16PM -0600, Jonathon B. Craw wrote:
> Problem: Any 2.4 kernel I've tried, 2.4.18 - 20, ac patch for .20, or
> kernel from Woody install cd with boot option bf24 fails at this
> prompt:
>
> boot:
> Loading 4th
> BIOS data check successful
> Uncompressing Linux. . . Ok, booting the kernel.
>
> And there it hangs.
>
>
> 2.2, any custom kernel or Woody install cd works.
>
> The system is based on the Shuttle mainboard FX41 with a VIA
> KM266/VT8375 North Bridge, and VIA VT8235 South Bridge.
Not sure if it will help at all, but I have two of the SN41G2 systems
(based on the FN41 motherboard) and they are both running 2.4.20 without
a hiccup. Due to the integrated NIC I had to get the nVidia nforce2
drivers. However other than that they work wonderfully so far.
> I have a CD-RW installed (secondary master), two IDE drives (60
> primary master and 40 secondary master), an Athlon 2100+ and and one
> stick 512 megs 2100 DDR.
My setup is similar. Both systems have an IDE CD-RW (secondary master),
an 80 gig HD (primary master), an Athlon XP2100+ and 512 Megs 2100 DDR.
I started with the 2.4.18-bf2.4 and from there moved to 2.4.20. Both
have worked fine.
--
Jamin W. Collins
Reply to: