Re: Can not get UDMA-100 working...
hi ya
> my problem is that it shows *udma2 (udma-33), with using_dma
> on...
>
...
> PDC20269: (U)DMA Burst Bit ENABLED Primary MASTER Mode Secondary MASTER Mode.
the 202xx chipset is fairly good/new...
- you need to make sure your kernel supports the promise chipset
- you also need to make sure your bios is set to autodetect for its access
mode .. do NOT tell it to use pio mode
and yes.. try all this w/o the sb card plugged in
c ya
alvin
> ide0: BM-DMA at 0xa000-0xa007, BIOS settings: hda:pio, hdb:pio
> ide1: BM-DMA at 0xa008-0xa00f, BIOS settings: hdc:pio, hdd:pio
> ide2: BM-DMA at 0xd800-0xd807, BIOS settings: hde:DMA, hdf:pio
> hda: 117231408 sectors (60022 MB) w/2048KiB Cache, CHS=116301/16/63, UDMA(100)
> sb: ISAPnP reports 'Creative SB AWE64 PnP' at i/o 0x220, irq 5, dma 1, 5
>
> So maybe the old SB card?
Reply to: