Webmin CD Burn
I've been trying to use the Webmin CD Burner app (cdrecord) with little
success.
Perhaps the problem is the fact that I am using an iso-scsi device,
which is picked up by CD Burner. That's fine.
I want to burn files. So, when I do a test burn, here is my output:
*Testing burn with command cdrecord -v dev=0,0,0 speed=2 -dummy
'/tmp/.webmin/burner.iso' ..*
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.22
Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.5'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'RICOH '
Identifikation : 'MP6200A '
Revision : '2.20'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Drive buf size : 786432 = 768 KB
FIFO size : 4194304 = 4096 KB
cdrecord: Drive needs to reload the media to return to proper status.
Track 01: data 1 MB
Total size: 2 MB (00:13.04) = 978 sectors
Lout start: 2 MB (00:15/03) = 978 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Reference speed: 2
Is not unrestricted
Is erasable
ATIP start of lead in: -11615 (97:27/10)
ATIP start of lead out: 962 (00:14/62)
speed low: 0 speed high: 4
power mult factor: 4 5
recommended erase/write power: 3
A2 values: 00 00 00
Disk type: Phase change
Manuf. index: 18
Manufacturer: Plasmon Data systems Ltd.
Trying to clear drive status.
Blocks total: 1166730 Blocks current: 1166730 Blocks remaining: 1165752
Starting to write CD/DVD at speed 2 in dummy mode for single session.
Last chance to quit, starting dummy write in 9 seconds.8 seconds.7 seconds.6 seconds.5 seconds.4 seconds.3 seconds.2 seconds.1 seconds.0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... cdrecord: Input/output error. read track info: scsi sendcmd: no error
CDB: 52 01 00 00 00 FF 00 00 1C 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.003s timeout 240s
input buffer ready.
Writing time: 0.035s
Fixating...
WARNING: Some drives don't like fixation in dummy mode.
Fixating time: 0.007s
cdrecord: fifo had 32 puts and 0 gets.
cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
------------------------------------------------------------------------
--
Curtis Vaughan
North Pacific Corporation
Tel: (425) 822-1001
Cell: (206) 423-6979
WashTech (CWA Local 37083)
IWW x353203
Reply to: