Re: rlogin without a password
On Wednesday 01 May 2002 11:47 pm, David Z Maze wrote:
> Run ssh-keygen(1) to generate a public/private keypair. These should
> wind up in $HOME/.ssh, as identity and identity.pub. Use scp to copy
> the identity.pub file to the target machine, and cat it on to the end
> of $HOME/.ssh/authorized_keys. (It's possible that you might not have
> a .ssh directory; if not, create it, and run 'chmod 0700 .ssh'.)
>
> Now, when you log in, make sure you're running an ssh-agent(1)
> process. (This happens by default when you log in to X, I believe.)
> Run ssh-add(1); this will prompt you for the pass-phrase for the ssh
> key, and register it with the agent. Now when you run ssh, it will
> get the private key from the agent and use that to authenticate you to
> the remote machine (with no password).
Thanks for the quick guide. I decided to apt-get remove anything that
remotely resembled anything to do with ssh, and start again. I also manually
removed /etc/ssh* and ~/.ssh* as they affected the behaviour of ssh.
Then I did apt-get install ssh, and immediately I'm confused. The output was:
root@guestw:~# apt-get install ssh
Reading Package Lists... Done
Building Dependency Tree... Done
The following NEW packages will be installed:
ssh
0 packages upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 0B/600kB of archives. After unpacking 1352kB will be used.
Preconfiguring packages ...
Selecting previously deselected package ssh.
(Reading database ... 69032 files and directories currently installed.)
Unpacking ssh (from .../ssh_1%3a3.0.2p1-9_i386.deb) ...
Setting up ssh (3.0.2p1-9) ...
Creating SSH2 RSA key
Creating SSH2 DSA key
Restarting OpenBSD Secure Shell server: sshd.
That looks to me like it's installing ssh2, and not ssh. I'm not sure of what
the differences are, but I'm not sure what I've got installed; ssh, or ssh2,
or both, and whether that is important.
Curiously, the output of installing it on the laptop is slightly different.
It appears to have set a SSH1 key. (NB: The laptop is 'vaiow', the server is
'guestw'). The output from installing on the laptop is:
root@vaiow:~# apt-get install ssh
Reading Package Lists... Done
Building Dependency Tree... Done
The following NEW packages will be installed:
ssh
0 packages upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 0B/600kB of archives. After unpacking 1352kB will be used.
Preconfiguring packages ...
Selecting previously deselected package ssh.
(Reading database ... 61637 files and directories currently installed.)
Unpacking ssh (from .../ssh_1%3a3.0.2p1-9_i386.deb) ...
Setting up ssh (3.0.2p1-9) ...
Creating SSH1 key
Creating SSH2 RSA key
Creating SSH2 DSA key
Restarting OpenBSD Secure Shell server: sshd
Notice the extra line: 'Creating SSH1 key'
I then use ssh-keygen to create my public/private pairs, and scp the public
to guestw. I cat it to the end of authorized keys. guestw looks like this:
dougie@guestw:~$ ls -ld .ssh
drwx--S--- 2 dougie dougie 4096 May 2 09:01 .ssh
dougie@guestw:~$ ls -l .ssh
total 16
-rwx------ 1 dougie dougie 995 May 2 09:01 authorized_keys
-rw------- 1 dougie dougie 528 May 2 08:34 identity
-rw-r--r-- 1 dougie dougie 332 May 2 08:34 identity.pub
-rw-r--r-- 1 dougie dougie 455 May 2 09:01 known_hosts
dougie@guestw:~$ ps -ef | grep agent
dougie 361 332 0 08:52 ? 00:00:00 /usr/bin/ssh-agent
x-session-manager
I had a bit of a problem initially with ssh-agent, as it has to be run on the
machine itself. So I have to run around the house to go to each PC and type
it in, rather than from a telnet session. i.e. The telnet session produces:
dougie@guestw:~$ ssh-add
Could not open a connection to your authentication agent.
Finally ran ssh-add successfully and did a few tests. Here's the end of the
output from ssh -v guestw (run from vaiow):
debug1: Connection established.
debug1: identity file /home/dougie/.ssh/identity type 0
debug1: identity file /home/dougie/.ssh/id_rsa type -1
debug1: identity file /home/dougie/.ssh/id_dsa type -1
debug1: Remote protocol version 2.0, remote software version OpenSSH_3.0.2p1
Debian 1:3.0.2p1-9
debug1: match: OpenSSH_3.0.2p1 Debian 1:3.0.2p1-9 pat ^OpenSSH
Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_3.0.2p1 Debian 1:3.0.2p1-9
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug1: kex: server->client aes128-cbc hmac-md5 none
debug1: kex: client->server aes128-cbc hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug1: dh_gen_key: priv key bits set: 131/256
debug1: bits set: 510/1024
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug1: Host 'guestw' is known and matches the RSA host key.
debug1: Found key in /home/dougie/.ssh/known_hosts:1
debug1: bits set: 512/1024
debug1: ssh_rsa_verify: signature correct
debug1: kex_derive_keys
debug1: newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: waiting for SSH2_MSG_NEWKEYS
debug1: newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: done: ssh_kex2.
debug1: send SSH2_MSG_SERVICE_REQUEST
debug1: service_accept: ssh-userauth
debug1: got SSH2_MSG_SERVICE_ACCEPT
debug1: authentications that can continue:
publickey,password,keyboard-interactive
debug1: next auth method to try is publickey
debug1: try privkey: /home/dougie/.ssh/id_rsa
debug1: try privkey: /home/dougie/.ssh/id_dsa
debug1: next auth method to try is keyboard-interactive
Password:
So close, but no cigar! My reading of the output is that it's using SSH2, and
it won't find the keys: /home/dougie/.ssh/id_rsa. These look like SSH2 files.
But I have just done apt-get install ssh, so I'm not sure what I've got
installed, or what the difference is.
Dougie
--
To UNSUBSCRIBE, email to debian-user-request@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Reply to: