Re: VIA P4X333 CHIPSET

[Lourens Steenkamp <palchen@ananzi.co.za>]

Lourens replying to herv <hrichard@brutele.be> wrote:

      >  Hi all
      >  
      >  i think i have a little prob.Could some one help me??
      >  i have those message from dmesg...:
      >  .....
      >  PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
      >  PCI: Using configuration type 1
      >  PCI: Probing PCI hardware
      >  Unknown bridge resource 0: assuming transparent
      >  PCI: Using IRQ router default [1106/3177] at 00:11.0
      >  PCI: Hardcoded IRQ 14 for device 00:11.1
      >  .....
      >  Uniform Multi-Platform E-IDE driver Revision: 6.31
      >  ide: Assuming 33MHz system bus speed for PIO modes; override
      >  with idebus=xx VP_IDE: IDE controller on PCI bus 00 dev 89
      >  PCI: Hardcoded IRQ 14 for device 00:11.1
      >  VP_IDE: chipset revision 6
      >  VP_IDE: not 100% native mode: will probe irqs later
      >  VP_IDE: Unknown VIA SouthBridge, contact Vojtech Pavlik
      >  <vojtech@suse.cz>.....
      >  Linux agpgart interface v0.99 (c) Jeff Hartmann
      >  agpgart: Maximum main memory to use for agp memory: 321M
      >  agpgart: Unsupported Via chipset (device id: 3128), you might
      >  want to try agp_try_unsupported=1.
      >  agpgart: no supported devices found.
      >  ....
      >  
      >  May be the P4X333 is not recognized by the 2.4.18-686 kernel or
      >  there is a patch.....
      >  Someone have an explanation??
      >  
      >  Thnaks a lot in advance and sorry for the big mail .
      >  herve
      >  

I have seen this on my mobos.

There is a patch by Vojtech (google for vt8235) for the 2.4.19 kernels.

HTH

***

Linux and Open Source Software by choice

***

Lourens Steenkamp
R.S.A.