X Not starting ? S3 Virge GX/2
Hi all,
I have a potato box and trying to install X
Current Config is
S3 Virge GX/2 4mb Card and an
ADI ProVista VD 548 Monitor (Which I can't seem to get specs for ...)
No valid Modes seem to come through and when I run XF86_S3 it falls over.
Any ideas?
Cheers
Kim Christiansen
==================
//xdm
===================
XFree86 Version 3.3.6 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: January 8 2000
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.2.14-va.4.4-i586 i686 [ELF]
Configured drivers:
S3V: accelerated server for S3 graphics adaptors (Patchlevel 0)
s3_ViRGE
(using VT number 7)
XF86Config: /usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keymap: "xfree86(en_US)" (overrides other XKB settings)
(**) Mouse: type: PS/2, device: /dev/psaux, buttons: 3
(**) S3V: Graphics device ID: "S3VirgeGX"
(**) S3V: Monitor ID: "AdiProVista"
(--) S3V: Mode "640x480" needs hsync freq of 53.01 kHz. Deleted.
(--) S3V: Mode "800x600" needs hsync freq of 35.16 kHz. Deleted.
(--) S3V: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted.
(--) S3V: Mode "640x400" needs hsync freq of 37.86 kHz. Deleted.
(--) S3V: Mode "640x480" needs hsync freq of 36.46 kHz. Deleted.
(--) S3V: Mode "640x480" needs hsync freq of 37.50 kHz. Deleted.
(--) S3V: Mode "800x600" needs hsync freq of 37.88 kHz. Deleted.
(--) S3V: Mode "640x480" needs hsync freq of 43.27 kHz. Deleted.
(--) S3V: Mode "1152x864" needs hsync freq of 43.92 kHz. Deleted.
(--) S3V: Mode "800x600" needs hsync freq of 48.08 kHz. Deleted.
(--) S3V: Mode "1024x768" needs hsync freq of 48.36 kHz. Deleted.
(--) S3V: Mode "640x480" needs hsync freq of 53.01 kHz. Deleted.
(--) S3V: Mode "1152x864" needs hsync freq of 53.51 kHz. Deleted.
(--) S3V: Mode "800x600" needs hsync freq of 55.84 kHz. Deleted.
(--) S3V: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted.
(--) S3V: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted.
(--) S3V: Mode "800x600" needs hsync freq of 64.02 kHz. Deleted.
(--) S3V: Mode "1024x768" needs hsync freq of 62.50 kHz. Deleted.
(--) S3V: Mode "1152x864" needs hsync freq of 62.42 kHz. Deleted.
(--) S3V: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted.
(--) S3V: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted.
(--) S3V: Mode "1152x864" needs hsync freq of 70.88 kHz. Deleted.
(--) S3V: Mode "1280x1024" needs hsync freq of 74.59 kHz. Deleted.
(--) S3V: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted.
(--) S3V: Mode "1152x864" needs hsync freq of 76.01 kHz. Deleted.
(--) S3V: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted.
(--) S3V: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted.
(--) S3V: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted.
(--) S3V: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.
(--) S3V: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted.
(--) S3V: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted.
(--) S3V: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
(--) S3V: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted.
(--) S3V: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted.
(--) S3V: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted.
(--) S3V: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted.
(--) S3V: Mode "512x384" needs vert refresh rate of 77.97 Hz. Deleted.
(--) S3V: Mode "512x384" needs hsync freq of 34.38 kHz. Deleted.
(--) S3V: Mode "320x240" needs hsync freq of 39.38 kHz. Deleted.
(--) S3V: Mode "400x300" needs hsync freq of 35.16 kHz. Deleted.
(--) S3V: Mode "400x300" needs hsync freq of 37.88 kHz. Deleted.
(--) S3V: Mode "400x300" needs hsync freq of 48.08 kHz. Deleted.
(--) S3V: Mode "480x300" needs hsync freq of 35.16 kHz. Deleted.
(--) S3V: Mode "480x300" needs hsync freq of 37.80 kHz. Deleted.
(--) S3V: Mode "480x300" needs hsync freq of 39.56 kHz. Deleted.
(--) S3V: Mode "480x300" needs hsync freq of 48.00 kHz. Deleted.
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/:unscaled,/usr/X11R6/lib/X11/fonts/cyrillic/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/cyrillic/,/usr/X11R6/lib/X11/fonts/100dpi/,/usr/X11R6/lib/X11/fonts/75dpi/"
(--) S3V: PCI: ViRGE/GX2 rev 6, Linear FB @ 0xe0000000
(--) S3V: chipset: ViRGE/GX2 rev. 6
(--) S3V: chipset driver: s3_ViRGE
(--) S3V: videoram: 4096k
(--) S3V: for ViRGE chips you shouldn't specify a Ramdac
(--) S3V: Ramdac type: s3_trio64
(--) S3V: Ramdac speed: 170 MHz
(--) S3V: Using Trio32/64 programmable clock (MCLK 75.886 MHz)
(--) S3V: Maximum allowed dot-clock: 170.000 MHz
(--) S3V: There is no mode definition named "640x480"
(--) S3V: Removing mode "640x480" from list of valid modes.
(--) S3V: There is no mode definition named "800x600"
(--) S3V: Removing mode "800x600" from list of valid modes.
(--) S3V: There is no mode definition named "1024x768"
(--) S3V: Removing mode "1024x768" from list of valid modes.
(--) S3V: There is no mode definition named "1280x1024"
Fatal server error:
No valid modes found.
When reporting a problem related to a server crash, please send
the full server output, not just the last messages
xdm error (pid 185): Server for display :0 terminated unexpectedly: 1
==========================
//syslog
===========================
Nov 26 08:40:08 Sloth syslogd 1.3-3#33.1: restart.
Nov 26 08:40:08 Sloth kernel: klogd 1.3-3#33.1, log source = /proc/kmsg started.
Nov 26 08:40:08 Sloth kernel: Inspecting /boot/System.map-2.2.19pre17
Nov 26 08:40:09 Sloth kernel: Loaded 9815 symbols from /boot/System.map-2.2.19pre17.
Nov 26 08:40:09 Sloth kernel: Symbols match kernel version 2.2.19.
Nov 26 08:40:09 Sloth kernel: Loaded 286 symbols from 7 modules.
Nov 26 08:40:09 Sloth kernel: Linux version 2.2.19pre17 (herbert@arnor) (gcc version 2.7.2.3) #1 Tue Mar 13 22:37:59 EST 2001
Nov 26 08:40:09 Sloth kernel: BIOS-provided physical RAM map:
Nov 26 08:40:09 Sloth kernel: BIOS-e820: 0009f000 @ 00000000 (usable)
Nov 26 08:40:09 Sloth kernel: BIOS-e820: 03ef0000 @ 00100000 (usable)
Nov 26 08:40:09 Sloth kernel: Detected 300684 kHz processor.
Nov 26 08:40:09 Sloth kernel: Console: colour VGA+ 80x25
Nov 26 08:40:09 Sloth kernel: Calibrating delay loop... 599.65 BogoMIPS
Nov 26 08:40:09 Sloth kernel: Memory: 62168k/65472k available (1744k kernel code, 412k reserved, 992k data, 156k init)
Nov 26 08:40:09 Sloth kernel: Dentry hash table entries: 8192 (order 4, 64k)
Nov 26 08:40:09 Sloth kernel: Buffer cache hash table entries: 65536 (order 6, 256k)
Nov 26 08:40:09 Sloth kernel: Page cache hash table entries: 16384 (order 4, 64k)
Nov 26 08:40:09 Sloth kernel: VFS: Diskquotas version dquot_6.4.0 initialized
Nov 26 08:40:09 Sloth kernel: Intel machine check architecture supported.
Nov 26 08:40:09 Sloth kernel: Intel machine check reporting enabled on CPU#0.
Nov 26 08:40:09 Sloth kernel: CPU: Intel Celeron (Covington) stepping 01
Nov 26 08:40:09 Sloth kernel: Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Nov 26 08:40:09 Sloth kernel: Checking 'hlt' instruction... OK.
Nov 26 08:40:09 Sloth kernel: Checking for popad bug... OK.
Nov 26 08:40:09 Sloth kernel: POSIX conformance testing by UNIFIX
Nov 26 08:40:09 Sloth kernel: mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au)
Nov 26 08:40:09 Sloth kernel: PCI: PCI BIOS revision 2.10 entry at 0xfb380
Nov 26 08:40:09 Sloth kernel: PCI: Using configuration type 1
Nov 26 08:40:09 Sloth kernel: PCI: Probing PCI hardware
Nov 26 08:40:09 Sloth kernel: Linux NET4.0 for Linux 2.2
Nov 26 08:40:09 Sloth kernel: Based upon Swansea University Computer Society NET3.039
Nov 26 08:40:09 Sloth kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Nov 26 08:40:09 Sloth kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Nov 26 08:40:09 Sloth kernel: TCP: Hash tables configured (ehash 65536 bhash 65536)
Nov 26 08:40:09 Sloth kernel: Starting kswapd v 1.5
Nov 26 08:40:09 Sloth kernel: Detected PS/2 Mouse Port.
Nov 26 08:40:09 Sloth kernel: Serial driver version 4.27 with no serial options enabled
Nov 26 08:40:09 Sloth kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A
Nov 26 08:40:09 Sloth kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A
Nov 26 08:40:09 Sloth kernel: pty: 256 Unix98 ptys configured
Nov 26 08:40:09 Sloth kernel: Real Time Clock Driver v1.09
Nov 26 08:40:09 Sloth kernel: RAM disk driver initialized: 16 RAM disks of 4096K size
Nov 26 08:40:09 Sloth kernel: loop: registered device at major 7
Nov 26 08:40:09 Sloth kernel: PIIX4: IDE controller on PCI bus 00 dev 39
Nov 26 08:40:09 Sloth kernel: PIIX4: not 100%% native mode: will probe irqs later
Nov 26 08:40:09 Sloth kernel: ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
Nov 26 08:40:09 Sloth kernel: ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
Nov 26 08:40:09 Sloth kernel: hda: Seagate Technology 1275MB - ST31276A, ATA DISK drive
Nov 26 08:40:09 Sloth kernel: hdc: ATAPI CD-ROM DRIVE 32X MAXIMUM, ATAPI CDROM drive
Nov 26 08:40:09 Sloth kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Nov 26 08:40:09 Sloth kernel: ide1 at 0x170-0x177,0x376 on irq 15
Nov 26 08:40:09 Sloth kernel: hda: Seagate Technology 1275MB - ST31276A, 1221MB w/0kB Cache, CHS=620/64/63
Nov 26 08:40:09 Sloth kernel: hdc: ATAPI 27X CD-ROM drive, 120kB Cache
Nov 26 08:40:09 Sloth kernel: Uniform CD-ROM driver Revision: 3.11
Nov 26 08:40:09 Sloth kernel: Floppy drive(s): fd0 is 1.44M
Nov 26 08:40:09 Sloth kernel: FDC 0 is a post-1991 82077
Nov 26 08:40:09 Sloth kernel: md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
Nov 26 08:40:09 Sloth kernel: (scsi0) <Adaptec AHA-2940A Ultra SCSI host adapter> found at PCI 0/10/0
Nov 26 08:40:09 Sloth kernel: (scsi0) Narrow Channel, SCSI ID=7, 3/255 SCBs
Nov 26 08:40:09 Sloth kernel: (scsi0) Cables present (Int-50 NO, Ext-50 NO)
Nov 26 08:40:09 Sloth kernel: (scsi0) Downloading sequencer code... 436 instructions downloaded
Nov 26 08:40:09 Sloth kernel: scsi: <fdomain> Detection failed (no card)
Nov 26 08:40:09 Sloth kernel: NCR53c406a: no available ports found
Nov 26 08:40:09 Sloth kernel: sym53c416.c: Version 1.0.0
Nov 26 08:40:09 Sloth kernel: Failed initialization of WD-7000 SCSI card!
Nov 26 08:40:09 Sloth kernel: IBM MCA SCSI: Version 3.2
Nov 26 08:40:09 Sloth kernel: IBM MCA SCSI: No Microchannel-bus present --> Aborting.
Nov 26 08:40:09 Sloth kernel: This machine does not have any IBM MCA-bus
Nov 26 08:40:09 Sloth kernel: or the MCA-Kernel-support is not enabled!
Nov 26 08:40:09 Sloth kernel: megaraid: v1.11 (Aug 23, 2000)
Nov 26 08:40:09 Sloth kernel: aec671x_detect:
Nov 26 08:40:09 Sloth kernel: 3w-xxxx: tw_findcards(): No cards found.
Nov 26 08:40:09 Sloth kernel: scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.33/3.2.4
Nov 26 08:40:09 Sloth kernel: <Adaptec AHA-2940A Ultra SCSI host adapter>
Nov 26 08:40:09 Sloth kernel: scsi : 1 host.
Nov 26 08:40:09 Sloth kernel: scsi : detected total.
Nov 26 08:40:09 Sloth kernel: Partition check:
Nov 26 08:40:09 Sloth kernel: hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 >
Nov 26 08:40:09 Sloth kernel: apm: BIOS version 1.2 Flags 0x07 (Driver version 1.13)
Nov 26 08:40:09 Sloth kernel: apm: disabled on user request.
Nov 26 08:40:09 Sloth kernel: VFS: Mounted root (ext2 filesystem) readonly.
Nov 26 08:40:09 Sloth kernel: Freeing unused kernel memory: 156k freed
Nov 26 08:40:09 Sloth kernel: NET4: Unix domain sockets 1.0 for Linux NET4.0.
Nov 26 08:40:09 Sloth kernel: Adding Swap: 76572k swap-space (priority -1)
Nov 26 08:40:09 Sloth kernel: IPv6 v0.8 for NET4.0
Nov 26 08:40:09 Sloth kernel: IPv6 over IPv4 tunneling driver
Nov 26 08:40:09 Sloth kernel: usb.c: registered new driver usbdevfs
Nov 26 08:40:09 Sloth kernel: usb.c: registered new driver hub
Nov 26 08:40:09 Sloth kernel: usb.c: registered new driver dc2xx
Nov 26 08:40:09 Sloth kernel: EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
Nov 26 08:40:09 Sloth last message repeated 2 times
Nov 26 08:40:14 Sloth /usr/sbin/cron[179]: (CRON) INFO (pidfile fd = 3)
Nov 26 08:40:14 Sloth /usr/sbin/cron[180]: (CRON) STARTUP (fork ok)
Nov 26 08:52:30 Sloth kernel: VFS: Disk change detected on device fd(2,0)
==================
// end syslog
==================
Reply to: