On Sun, Nov 24, 2002 at 05:34:13PM -0600, Liudmila Yafremava wrote:
>
> Yes, I use a standard gpm mouse (to the best of my knowledge :-) )
I think you need to change /etc/gpm.conf to read something like:
device=/dev/mouse
responsiveness=
repeat_type=raw
type=ps2
append=""
and then restart gpm, i.e., as root run "/etc/init.d/gpm restart".
Change the mouse section in XF86Config-4 to:
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/gpmdata"
EndSection
> Section "InputDevice"
> Identifier "Keyboard0"
> Driver "keyboard"
Maybe add some options to better define your keyboard and the number
of keys it has. My XF86Config-4 has these, but yours will probably be
different:
You could add mode lines to Section "Screen" to control modes and add
line to control default color depth.
>
> Section "Screen"
> Identifier "Screen0"
> Device "Card0"
> Monitor "Monitor0"
# set default color depth as 1, 4, 8, 15, 16, or 24
DefaultDepth 16
> SubSection "Display"
> Depth 1
# add mode line to control modes; maybe something like
# check /var/log/XFree86.0.log for supported modes and add the ones
# you want to use. Maybe something like:
Modes "1280x1024" "1152x870" "1024x768" "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Depth 4
# add mode line to control modes; maybe something like
Modes "1024x768" "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Depth 8
# add mode line to control modes; maybe something like
Modes "1024x768" "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Depth 15
# add mode line to control modes; maybe something like
Modes "1024x768" "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Depth 16
# add mode line to control modes; maybe something like
Modes "1024x768" "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Depth 24
# add mode line to control modes; maybe something like
Modes "1024x768" "800x600" "640x480"
> EndSubSection
> EndSection
[snip]
> (II) NV(0): Supported VESA Video Modes:
> (II) NV(0): 720x400@70Hz
> (II) NV(0): 720x400@88Hz
> (II) NV(0): 640x480@60Hz
> (II) NV(0): 640x480@67Hz
> (II) NV(0): 640x480@72Hz
> (II) NV(0): 640x480@75Hz
> (II) NV(0): 800x600@56Hz
> (II) NV(0): 800x600@60Hz
> (II) NV(0): 800x600@72Hz
> (II) NV(0): 800x600@75Hz
> (II) NV(0): 832x624@75Hz
> (II) NV(0): 1024x768@87Hz (interlaced)
> (II) NV(0): 1024x768@60Hz
> (II) NV(0): 1024x768@70Hz
> (II) NV(0): 1024x768@75Hz
> (II) NV(0): 1280x1024@75Hz
> (II) NV(0): 1152x870@75Hz
[snip]
> (--) NV(0): Virtual size is 1920x1440 (pitch 1920)
> (**) NV(0): Default mode "1920x1440": 234.0 MHz, 90.0 kHz, 60.0 Hz
> (II) NV(0): Modeline "1920x1440" 234.00 1920 2048 2256 2600 1440 1441
> 1444 1500 -hsync +vsync
[snip]
> > On Sun, Nov 24, 2002 at 04:19:25PM -0600, Liudmila Yafremava wrote:
[snip]
> > > I have to do it manually later, and afterwards I cannot
> > > reconfigure the monitor. I want to be able to change resolution, but my
> > > changes in XF86Config-4 never take effect after reboot; ctrl-alt-+ does
> > > not invoke the list of resolutions, and when I run xf86config to change
> > > things manually, it throws resolution way down to give me screen-size
> > > letters. [snip]
If you are using xdm, gdm, or kdm, after you make changes to
XF86Config-4, stop the service and restart it for the changes to take
effect. For example:
# /etc/init.d/gdm stop
# /etc/init.d/gdm start
--
Jerome
Attachment:
pgpTPnN1NF82S.pgp
Description: PGP signature