startx errors -> vrefresh out of range,..
I have just installed the basic `x' package on a toshiba satellite
335CDS laptop, ( circa 98 ). I run debian 3.0, kernel 2.4.18.
Here is some excerpts of my errror file. I would appreciate
any help or insight any onw could provide.
TIA
-mUs
<excerpt>
warning: process set to nice value 0 instead of -10 as requested
(--) Assigning device section with no busID to primary device
(--) Chipset generic found
(**) VGA(0): Depth 4, (--) framebuffer bpp 4
(==) VGA(0): RGB weight 666
(==) VGA(0): Default visual is StaticColor
(==) VGA(0): Using gamma correction (1.0, 1.0, 1.0)
(==) VGA(0): videoRam: 256 kBytes.
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
(--) VGA(0): Pixel clocks available:
(--) VGA(0): pixel clocks: 28.320 28.322 28.320 28.320
(II) VGA(0): Generic Monitor: Using hsync range of 28.00-50.00 kHz
(II) VGA(0): Generic Monitor: Using vrefresh range of 43.00-75.00 Hz
(II) VGA(0): Not using default mode "640x350" (vrefresh out of range)
(II) VGA(0): Not using default mode "640x400" (vrefresh out of range)
(II) VGA(0): Not using default mode "800x600" (hsync out of range)
(II) VGA(0): Not using default mode "800x600" (hsync out of range)
(II) VGA(0): Not using default mode "800x600" (hsync out of range)
(II) VGA(0): Not using default mode "800x600" (hsync out of range)
(II) VGA(0): Not using default mode "800x600" (hsync out of range)
(II) VGA(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1152x864" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1280x960" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1280x960" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1280x1024" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1280x1024" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1280x1024" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1400x1050" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1400x1050" (insufficient memory for mode)
(II) VGA(0): Not using mode "640x480" (no clock available for mode)
(II) VGA(0): Not using mode "720x400" (no clock available for mode)
(EE) VGA(0): Virtual height (0) is too small for the hardware (min 1)
(II) Unloading /usr/X11R6/lib/modules/libvgahw.a
(EE) Screen(s) found, but none have a usable configuration.
Fatal server error:
no screens found
When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to submit@bugs.debian.org.
XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0"
after 0 requests (0 known processed) with 0 events remaining.
</excerpt>
Reply to: