Re: Trouble ripping from CDs.
> does cdda2wav have the same problem?
cdda2wav with the -paranoia flag spits out stuff that looks like this:
coffee (tmp)$ cdda2wav -t 3 -D /dev/sg0 -paranoia
Type: ROM, Vendor ' ' Model '40X12X48 CD-RW ' Revision '1.05' MMC+CDDA
724992 bytes buffer memory requested, 4 buffers, 75 sectors
Read TOC CD Text failed (probably not supported).
#Cdda2wav version 1.11a34_linux_2.4.19_i686_i686, real time sched., soundcard, libparanoia support
AUDIOtrack pre-emphasis copy-permitted tracktype channels
1- 1 no yes audio 2
AUDIOtrack pre-emphasis copy-permitted tracktype channels
2- 2 no no audio 2
AUDIOtrack pre-emphasis copy-permitted tracktype channels
3- 3 no yes audio 2
AUDIOtrack pre-emphasis copy-permitted tracktype channels
4- 7 no no audio 2
AUDIOtrack pre-emphasis copy-permitted tracktype channels
8- 9 no yes audio 2
Table of Contents: total tracks:9, (total time 47:53.30)
1.( 5:44.27), 2.( 4:16.21), 3.( 5:33.57), 4.( 7:20.32), 5.( 5:09.12),
6.( 4:48.56), 7.( 4:45.48), 8.( 5:59.24), 9.( 4:13.53)
Table of Contents: starting sectors
1.( 0), 2.( 25827), 3.( 45048), 4.( 70080), 5.( 103112),
6.( 126299), 7.( 147955), 8.( 169378), 9.( 196327), lead-out( 215355)
CDINDEX discid: xDbgXZsUYMUFWB3DMYHdN8c9.gA-
CDDB discid: 0x7f0b3709
CD-Text: not detected
CD-Extra: not detected
samplefile size will be 58875308 bytes.
recording 333.7599 seconds stereo with 16 bits @ 44100.0 Hz ->'audio'...
using lib paranoia for reading.
percent_done:
0%cdda2wav: Input/output error. ReadCD MMC 12: scsi sendcmd: no error
CDB: BE 04 00 00 AF F8 00 00 43 10 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 04 00 00 00 00 0C 00 00 00 00 08 03 00 00
Sense Key: 0x4 Hardware Error, Segment 0
Sense Code: 0x08 Qual 0x03 (logical unit communication crc error (ultra-dma/32)) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 1.532s timeout 300s
cdda2wav: Input/output error. ReadCD MMC 12: scsi sendcmd: no error
CDB: BE 04 00 00 B0 3B 00 00 4B 10 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 04 00 00 00 00 0C 00 00 00 00 08 03 00 00
Sense Key: 0x4 Hardware Error, Segment 0
Sense Code: 0x08 Qual 0x03 (logical unit communication crc error (ultra-dma/32)) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 1.319s timeout 300s
cdda2wav: Input/output error. ReadCD MMC 12: scsi sendcmd: no error
CDB: BE 04 00 00 AF F8 00 00 44 10 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 04 00 00 00 00 0C 00 00 00 00 08 03 00 00
Sense Key: 0x4 Hardware Error, Segment 0
Sense Code: 0x08 Qual 0x03 (logical unit communication crc error (ultra-dma/32)) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 1.037s timeout 300s
cdda2wav: Input/output error. ReadCD MMC 12: scsi sendcmd: no error
Removing the -paranoia flag still makes nothing happen, it just happens
faster. ;)
> Have you tried disabling/enabling DMA? Just guessing... Hope you get
> it to work.
Hmm. This sounds vaguely familiar, but I can't remember for sure what
this means. How do I check and toggle the state?
Thanks.
----------------------------------------------------------------------
Stephen W. Juranich sjuranic@ee.washington.edu
Electrical Engineering http://students.washington.edu/sjuranic
University of Washington http://ssli.ee.washington.edu/ssli
Reply to: