Re: Still getting kernel panic when compiling my own kernel
On 28 Sep 2002 15:43:48 +0200
Mariano Kamp <mkamp@gmx.de> wrote:
> Hi Hanasaki,
>
> > I would not assume that the settings are the same.
> >
> > Run 'make menuconfig' and check
> >
> > Be sure of the following are compiled into the kernel:
> > ext2, ext3, reiserfs
> > ide & scsi support for your ide/scsi chips/boards
> Well, as I am trying this for three weeks now and tried more than
> thirty different kernels. I am not going to follow this path.
>
> My question is: How can I get the settings for the kernel shipped with
> woody (24.18-bf). It works. And I can start from there.
>
> Or .. Would it help to go to a newer version than woody? Would it have
> xfree 4.2 and acpi already built in?
>
> >
> > How are you getting to a shell to check /var/log <which is a
> > directory not a file???> to look for messages if the kernel panics
> > and halts?
> >
> Because I kept the standard kernel and added it to lilo. So I am able
> to resurrect the system, but obviously without the features I need
> (acpi).
>
> > If you need more specific help, provide more specifics on your
> > process and StepByStep results.
> >
> I did this a couple of times. See other postings.
>
> As I am very much suspecting the procedures to be the source of
> trouble(why else should not even one of my roll your own kernels work)
> I will go into the details again.
>
>
> apt-get remove kernel-source-2.4.18 kernel-package
> rm -rf /usr/src/linux
> rm -rf /usr/src/kernel-source-2.4.18.tar.bz2
> rm -rf /lib/modules/2.4.18
>
> apt-get install kernel-source-2.4.18 kernel-package
> cd /usr/src
> tar xvjf kernel-source-2.4.18.tar.bz2
> ln -s kernel-source-2.4.18.tar.bz2 linux
> cd linux
>
> make-kpkg clean
> make-kpkg -config=x --revision=sonyVaioGrx316G kernel_image
> dpkg -i /usr/src/kernel-image-2.4.18_sonyVaioGrx316G_i386.deb
>
> reboot
>
>
> Hopefully I got the steps right.
>
> ACPI patch and other necessary things have been left out since two
> weeks to reduce complexity.
> I also attached the current .config file. But this doesn't make much
> difference as no config has worked so far. But as this one is a clean
> and untouched one, we probably can start from there. The only thing I
> changed is:
>
> CONFIG_IDE=y
> CONFIG_EXT3_FS=y
>
>
> Any help is appreciated.
>
> Mariano
>
>
>
>
> On Sat, 2002-09-28 at 01:54, Hanasaki JiJi wrote:
> > I would not assume that the settings are the same.
> >
> > Run 'make menuconfig' and check
> >
> > Be sure of the following are compiled into the kernel:
> > ext2, ext3, reiserfs
> > ide & scsi support for your ide/scsi chips/boards
> >
> > Verify that your lilo.conf has the right settings for partitions and
> > kernel file from the dpkg -i yourkernel.deb
> >
> > How are you getting to a shell to check /var/log <which is a
> > directory not a file???> to look for messages if the kernel panics
> > and halts?
> >
> > If you need more specific help, provide more specifics on your
> > process and StepByStep results.
> >
> > Mariano Kamp wrote:
> > > Hi,
> > >
> > > I still haven't given up yet to compile my own kernel, but I am
> > > nearly there. Meanhwile I removed the kernel and the kernel
> > > source packages and installed them again. But even from the
> > > scratch without changing anything I get a kernel panic from my
> > > compiled kernel. Aren't the default settings being supposed to be
> > > the same as the standard kernel shipped? The standard kernel is
> > > working though.
> > >
> > > Problem is it doesn't support acpi out of the box and afaik I
> > > need acpi if I don't want to burn the processor on this
> > > particular machine(as described on linux-laptop.org).
> > >
> > > For the record .. I am using woody on a sony vaio grx316g.
> > >
> > > Btw. I also bought a null modem cabel to get the console
> > > messages from the kernel before the panic, but unfortunately I
> > > found out that my laptop has three usb, and firewire and ...,
> > > but not a serial port :-( Are there any other ways to see the
> > > kernel messages? I believe that the file system is not mounted
> > > at that point in time and probably because of that I don't see
> > > any relevant messages below /var/log.
> > >
> > > Cheers,
> > > Mariano
> > >
> > >
> > >
> > >
> >
> >
> > --
> > To UNSUBSCRIBE, email to debian-user-request@lists.debian.org
> > with a subject of "unsubscribe". Trouble? Contact
> > listmaster@lists.debian.org
> >
>
> #
> # Automatically generated make config: don't edit
> #
> CONFIG_X86=y
> CONFIG_ISA=y
> # CONFIG_SBUS is not set
> CONFIG_UID16=y
>
> #
> # Code maturity level options
> #
> CONFIG_EXPERIMENTAL=y
>
> #
> # Loadable module support
> #
> CONFIG_MODULES=y
> CONFIG_MODVERSIONS=y
> # CONFIG_KMOD is not set
>
> #
> # Processor type and features
> #
> CONFIG_M386=y
> # CONFIG_M486 is not set
> # CONFIG_M586 is not set
> # CONFIG_M586TSC is not set
> # CONFIG_M586MMX is not set
> # CONFIG_M686 is not set
> # CONFIG_MPENTIUMIII is not set
> # CONFIG_MPENTIUM4 is not set
> # CONFIG_MK6 is not set
> # CONFIG_MK7 is not set
> # CONFIG_MELAN is not set
> # CONFIG_MCRUSOE is not set
> # CONFIG_MWINCHIPC6 is not set
> # CONFIG_MWINCHIP2 is not set
> # CONFIG_MWINCHIP3D is not set
> # CONFIG_MCYRIXIII is not set
> # CONFIG_X86_CMPXCHG is not set
> # CONFIG_X86_XADD is not set
> CONFIG_X86_L1_CACHE_SHIFT=4
> CONFIG_RWSEM_GENERIC_SPINLOCK=y
> # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
> CONFIG_X86_PPRO_FENCE=y
> # CONFIG_TOSHIBA is not set
> # CONFIG_I8K is not set
> # CONFIG_MICROCODE is not set
> # CONFIG_X86_MSR is not set
> # CONFIG_X86_CPUID is not set
> CONFIG_NOHIGHMEM=y
> # CONFIG_HIGHMEM4G is not set
> # CONFIG_HIGHMEM64G is not set
> CONFIG_MATH_EMULATION=y
> # CONFIG_MTRR is not set
> # CONFIG_SMP is not set
> # CONFIG_X86_UP_APIC is not set
>
> #
> # General setup
> #
> CONFIG_NET=y
> CONFIG_PCI=y
> # CONFIG_PCI_GOBIOS is not set
> # CONFIG_PCI_GODIRECT is not set
> CONFIG_PCI_GOANY=y
> CONFIG_PCI_BIOS=y
> CONFIG_PCI_DIRECT=y
> # CONFIG_PCI_NAMES is not set
> # CONFIG_EISA is not set
> # CONFIG_MCA is not set
> # CONFIG_HOTPLUG is not set
> # CONFIG_PCMCIA is not set
> # CONFIG_HOTPLUG_PCI is not set
> CONFIG_SYSVIPC=y
> # CONFIG_BSD_PROCESS_ACCT is not set
> # CONFIG_SYSCTL is not set
> CONFIG_KCORE_ELF=y
> # CONFIG_KCORE_AOUT is not set
> CONFIG_BINFMT_AOUT=m
> CONFIG_BINFMT_ELF=y
> # CONFIG_BINFMT_MISC is not set
> # CONFIG_PM is not set
> # CONFIG_APM_IGNORE_USER_SUSPEND is not set
> # CONFIG_APM_DO_ENABLE is not set
> # CONFIG_APM_CPU_IDLE is not set
> # CONFIG_APM_DISPLAY_BLANK is not set
> # CONFIG_APM_RTC_IS_GMT is not set
> # CONFIG_APM_ALLOW_INTS is not set
> # CONFIG_APM_REAL_MODE_POWER_OFF is not set
>
> #
> # Memory Technology Devices (MTD)
> #
> # CONFIG_MTD is not set
>
> #
> # Parallel port support
> #
> # CONFIG_PARPORT is not set
>
> #
> # Plug and Play configuration
> #
> # CONFIG_PNP is not set
>
> #
> # Block devices
> #
> CONFIG_BLK_DEV_FD=y
> CONFIG_BLK_DEV_XD=m
> # CONFIG_BLK_CPQ_DA is not set
> # CONFIG_BLK_CPQ_CISS_DA is not set
> # CONFIG_BLK_DEV_DAC960 is not set
> CONFIG_BLK_DEV_LOOP=m
> # CONFIG_BLK_DEV_NBD is not set
> CONFIG_BLK_DEV_RAM=y
> CONFIG_BLK_DEV_RAM_SIZE=4096
> CONFIG_BLK_DEV_INITRD=y
>
> #
> # Multi-device support (RAID and LVM)
> #
> # CONFIG_MD is not set
>
> #
> # Networking options
> #
> # CONFIG_PACKET is not set
> # CONFIG_NETLINK_DEV is not set
> # CONFIG_NETFILTER is not set
> # CONFIG_FILTER is not set
> # CONFIG_UNIX is not set
> CONFIG_INET=y
> # CONFIG_IP_MULTICAST is not set
> # CONFIG_IP_ADVANCED_ROUTER is not set
> # CONFIG_IP_PNP is not set
> # CONFIG_NET_IPIP is not set
> # CONFIG_NET_IPGRE is not set
> # CONFIG_ARPD is not set
> # CONFIG_INET_ECN is not set
> # CONFIG_SYN_COOKIES is not set
> # CONFIG_IPV6 is not set
> # CONFIG_KHTTPD is not set
> # CONFIG_ATM is not set
> # CONFIG_VLAN_8021Q is not set
>
> #
> #
> #
> CONFIG_IPX=m
> # CONFIG_IPX_INTERN is not set
> CONFIG_ATALK=m
> # CONFIG_DECNET is not set
> # CONFIG_BRIDGE is not set
> # CONFIG_X25 is not set
> # CONFIG_LAPB is not set
> # CONFIG_LLC is not set
> # CONFIG_NET_DIVERT is not set
> # CONFIG_ECONET is not set
> # CONFIG_WAN_ROUTER is not set
> # CONFIG_NET_FASTROUTE is not set
> # CONFIG_NET_HW_FLOWCONTROL is not set
>
> #
> # QoS and/or fair queueing
> #
> # CONFIG_NET_SCHED is not set
>
> #
> # Telephony Support
> #
> # CONFIG_PHONE is not set
>
> #
> # ATA/IDE/MFM/RLL support
> #
> # CONFIG_IDE is not set
> CONFIG_IDE=y
> # CONFIG_BLK_DEV_IDE_MODES is not set
> # CONFIG_BLK_DEV_HD is not set
>
> #
> # SCSI support
> #
> CONFIG_SCSI=m
>
> #
> # SCSI support type (disk, tape, CD-ROM)
> #
> CONFIG_BLK_DEV_SD=m
> CONFIG_SD_EXTRA_DEVS=40
> CONFIG_CHR_DEV_ST=m
> # CONFIG_CHR_DEV_OSST is not set
> CONFIG_BLK_DEV_SR=m
> # CONFIG_BLK_DEV_SR_VENDOR is not set
> CONFIG_SR_EXTRA_DEVS=2
> CONFIG_CHR_DEV_SG=m
>
> #
> # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
> #
> # CONFIG_SCSI_DEBUG_QUEUES is not set
> CONFIG_SCSI_MULTI_LUN=y
> # CONFIG_SCSI_CONSTANTS is not set
> # CONFIG_SCSI_LOGGING is not set
>
> #
> # SCSI low-level drivers
> #
> # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
> CONFIG_SCSI_7000FASST=m
> # CONFIG_SCSI_ACARD is not set
> CONFIG_SCSI_AHA152X=m
> CONFIG_SCSI_AHA1542=m
> CONFIG_SCSI_AHA1740=m
> # CONFIG_SCSI_AACRAID is not set
> CONFIG_SCSI_AIC7XXX=m
> CONFIG_AIC7XXX_CMDS_PER_DEVICE=253
> CONFIG_AIC7XXX_RESET_DELAY_MS=15000
> # CONFIG_AIC7XXX_BUILD_FIRMWARE is not set
> # CONFIG_SCSI_AIC7XXX_OLD is not set
> # CONFIG_SCSI_DPT_I2O is not set
> CONFIG_SCSI_ADVANSYS=m
> CONFIG_SCSI_IN2000=m
> CONFIG_SCSI_AM53C974=m
> # CONFIG_SCSI_MEGARAID is not set
> CONFIG_SCSI_BUSLOGIC=m
> # CONFIG_SCSI_OMIT_FLASHPOINT is not set
> # CONFIG_SCSI_CPQFCTS is not set
> # CONFIG_SCSI_DMX3191D is not set
> CONFIG_SCSI_DTC3280=m
> CONFIG_SCSI_EATA=m
> # CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
> # CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
> CONFIG_SCSI_EATA_MAX_TAGS=16
> CONFIG_SCSI_EATA_DMA=m
> CONFIG_SCSI_EATA_PIO=m
> CONFIG_SCSI_FUTURE_DOMAIN=m
> # CONFIG_SCSI_GDTH is not set
> CONFIG_SCSI_GENERIC_NCR5380=m
> # CONFIG_SCSI_GENERIC_NCR53C400 is not set
> CONFIG_SCSI_G_NCR5380_PORT=y
> # CONFIG_SCSI_G_NCR5380_MEM is not set
> # CONFIG_SCSI_IPS is not set
> # CONFIG_SCSI_INITIO is not set
> # CONFIG_SCSI_INIA100 is not set
> CONFIG_SCSI_NCR53C406A=m
> CONFIG_SCSI_NCR53C7xx=m
> # CONFIG_SCSI_NCR53C7xx_sync is not set
> CONFIG_SCSI_NCR53C7xx_FAST=y
> CONFIG_SCSI_NCR53C7xx_DISCONNECT=y
> # CONFIG_SCSI_SYM53C8XX_2 is not set
> CONFIG_SCSI_NCR53C8XX=m
> # CONFIG_SCSI_SYM53C8XX is not set
> CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8
> CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
> CONFIG_SCSI_NCR53C8XX_SYNC=20
> # CONFIG_SCSI_NCR53C8XX_PROFILE is not set
> # CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set
> # CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set
> CONFIG_SCSI_PAS16=m
> # CONFIG_SCSI_PCI2000 is not set
> # CONFIG_SCSI_PCI2220I is not set
> # CONFIG_SCSI_PSI240I is not set
> CONFIG_SCSI_QLOGIC_FAS=m
> CONFIG_SCSI_QLOGIC_ISP=m
> # CONFIG_SCSI_QLOGIC_FC is not set
> # CONFIG_SCSI_QLOGIC_1280 is not set
> CONFIG_SCSI_SEAGATE=m
> # CONFIG_SCSI_SIM710 is not set
> # CONFIG_SCSI_SYM53C416 is not set
> # CONFIG_SCSI_DC390T is not set
> CONFIG_SCSI_T128=m
> CONFIG_SCSI_U14_34F=m
> # CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set
> CONFIG_SCSI_U14_34F_MAX_TAGS=8
> CONFIG_SCSI_ULTRASTOR=m
> # CONFIG_SCSI_DEBUG is not set
>
> #
> # Fusion MPT device support
> #
> # CONFIG_FUSION is not set
> # CONFIG_FUSION_BOOT is not set
> # CONFIG_FUSION_ISENSE is not set
> # CONFIG_FUSION_CTL is not set
> # CONFIG_FUSION_LAN is not set
>
> #
> # IEEE 1394 (FireWire) support (EXPERIMENTAL)
> #
> # CONFIG_IEEE1394 is not set
>
> #
> # I2O device support
> #
> # CONFIG_I2O is not set
>
> #
> # Network device support
> #
> CONFIG_NETDEVICES=y
>
> #
> # ARCnet devices
> #
> CONFIG_ARCNET=m
> # CONFIG_ARCNET_1201 is not set
> CONFIG_ARCNET_1051=m
> # CONFIG_ARCNET_RAW is not set
> # CONFIG_ARCNET_COM90xx is not set
> # CONFIG_ARCNET_COM90xxIO is not set
> # CONFIG_ARCNET_RIM_I is not set
> # CONFIG_ARCNET_COM20020 is not set
>
> #
> # Appletalk devices
> #
> # CONFIG_APPLETALK is not set
> # CONFIG_LTPC is not set
> # CONFIG_COPS is not set
> # CONFIG_IPDDP is not set
> CONFIG_DUMMY=m
> # CONFIG_BONDING is not set
> CONFIG_EQUALIZER=m
> # CONFIG_TUN is not set
> # CONFIG_ETHERTAP is not set
>
> #
> # Ethernet (10 or 100Mbit)
> #
> CONFIG_NET_ETHERNET=y
> # CONFIG_HAPPYMEAL is not set
> # CONFIG_SUNGEM is not set
> CONFIG_NET_VENDOR_3COM=y
> CONFIG_EL1=m
> CONFIG_EL2=m
> CONFIG_ELPLUS=m
> CONFIG_EL16=m
> CONFIG_EL3=m
> # CONFIG_3C515 is not set
> CONFIG_VORTEX=m
> CONFIG_LANCE=y
> CONFIG_NET_VENDOR_SMC=y
> CONFIG_WD80x3=m
> CONFIG_ULTRA=m
> CONFIG_SMC9194=m
> # CONFIG_NET_VENDOR_RACAL is not set
> CONFIG_AT1700=m
> CONFIG_DEPCA=m
> CONFIG_HP100=m
> CONFIG_NET_ISA=y
> CONFIG_E2100=m
> CONFIG_EWRK3=m
> CONFIG_EEXPRESS=m
> CONFIG_EEXPRESS_PRO=m
> CONFIG_HPLAN_PLUS=m
> CONFIG_HPLAN=m
> # CONFIG_LP486E is not set
> CONFIG_ETH16I=m
> CONFIG_NE2000=m
> # CONFIG_NET_PCI is not set
> CONFIG_NET_POCKET=y
> CONFIG_ATP=y
> CONFIG_DE600=m
> CONFIG_DE620=m
>
> #
> # Ethernet (1000 Mbit)
> #
> # CONFIG_ACENIC is not set
> # CONFIG_DL2K is not set
> # CONFIG_NS83820 is not set
> # CONFIG_HAMACHI is not set
> # CONFIG_YELLOWFIN is not set
> # CONFIG_SK98LIN is not set
> # CONFIG_FDDI is not set
> # CONFIG_HIPPI is not set
> CONFIG_PPP=m
> # CONFIG_PPP_MULTILINK is not set
> # CONFIG_PPP_ASYNC is not set
> # CONFIG_PPP_SYNC_TTY is not set
> # CONFIG_PPP_DEFLATE is not set
> # CONFIG_PPP_BSDCOMP is not set
> # CONFIG_PPPOE is not set
> CONFIG_SLIP=m
> CONFIG_SLIP_COMPRESSED=y
> CONFIG_SLIP_SMART=y
> # CONFIG_SLIP_MODE_SLIP6 is not set
>
> #
> # Wireless LAN (non-hamradio)
> #
> CONFIG_NET_RADIO=y
> CONFIG_STRIP=m
> CONFIG_WAVELAN=m
> # CONFIG_ARLAN is not set
> # CONFIG_AIRONET4500 is not set
> # CONFIG_AIRO is not set
> # CONFIG_HERMES is not set
>
> #
> # Wireless Pcmcia cards support
> #
> # CONFIG_AIRO_CS is not set
> CONFIG_NET_WIRELESS=y
>
> #
> # Token Ring devices
> #
> CONFIG_TR=y
> CONFIG_IBMTR=m
> # CONFIG_IBMOL is not set
> # CONFIG_IBMLS is not set
> # CONFIG_TMS380TR is not set
> # CONFIG_SMCTR is not set
> # CONFIG_NET_FC is not set
> # CONFIG_RCPCI is not set
> # CONFIG_SHAPER is not set
>
> #
> # Wan interfaces
> #
> # CONFIG_WAN is not set
>
> #
> # Amateur Radio support
> #
> # CONFIG_HAMRADIO is not set
>
> #
> # IrDA (infrared) support
> #
> # CONFIG_IRDA is not set
>
> #
> # ISDN subsystem
> #
> CONFIG_ISDN=m
> CONFIG_ISDN_PPP=y
> CONFIG_ISDN_PPP_VJ=y
> CONFIG_ISDN_MPP=y
> # CONFIG_ISDN_PPP_BSDCOMP is not set
> CONFIG_ISDN_AUDIO=y
> # CONFIG_ISDN_TTY_FAX is not set
>
> #
> # ISDN feature submodules
> #
> # CONFIG_ISDN_DRV_LOOP is not set
> # CONFIG_ISDN_DIVERSION is not set
>
> #
> # low-level hardware drivers
> #
>
> #
> # Passive ISDN cards
> #
> # CONFIG_ISDN_DRV_HISAX is not set
>
> #
> # Active ISDN cards
> #
> CONFIG_ISDN_DRV_ICN=m
> CONFIG_ISDN_DRV_PCBIT=m
> # CONFIG_ISDN_DRV_SC is not set
> # CONFIG_ISDN_DRV_ACT2000 is not set
> # CONFIG_ISDN_DRV_EICON is not set
> # CONFIG_ISDN_DRV_TPAM is not set
> # CONFIG_ISDN_CAPI is not set
> # CONFIG_HYSDN is not set
>
> #
> # Old CD-ROM drivers (not SCSI, not IDE)
> #
> CONFIG_CD_NO_IDESCSI=y
> CONFIG_AZTCD=m
> CONFIG_GSCD=m
> CONFIG_SBPCD=m
> CONFIG_MCD=m
> CONFIG_MCD_IRQ=11
> CONFIG_MCD_BASE=300
> CONFIG_MCDX=m
> CONFIG_OPTCD=m
> CONFIG_CM206=m
> CONFIG_SJCD=m
> CONFIG_ISP16_CDI=m
> CONFIG_CDU31A=m
> CONFIG_CDU535=m
>
> #
> # Input core support
> #
> # CONFIG_INPUT is not set
> CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
>
> #
> # Character devices
> #
> # CONFIG_VT is not set
> CONFIG_SERIAL=m
> # CONFIG_SERIAL_EXTENDED is not set
> # CONFIG_SERIAL_NONSTANDARD is not set
> # CONFIG_UNIX98_PTYS is not set
>
> #
> # I2C support
> #
> # CONFIG_I2C is not set
>
> #
> # Mice
> #
> CONFIG_BUSMOUSE=m
> CONFIG_ATIXL_BUSMOUSE=m
> # CONFIG_LOGIBUSMOUSE is not set
> CONFIG_MS_BUSMOUSE=m
> CONFIG_MOUSE=y
> CONFIG_PSMOUSE=m
> CONFIG_82C710_MOUSE=y
> # CONFIG_PC110_PAD is not set
>
> #
> # Joysticks
> #
> # CONFIG_INPUT_GAMEPORT is not set
>
> #
> # Input core support is needed for gameports
> #
>
> #
> # Input core support is needed for joysticks
> #
> # CONFIG_QIC02_TAPE is not set
>
> #
> # Watchdog Cards
> #
> # CONFIG_WATCHDOG is not set
> # CONFIG_INTEL_RNG is not set
> # CONFIG_NVRAM is not set
> # CONFIG_RTC is not set
> # CONFIG_DTLK is not set
> # CONFIG_R3964 is not set
> # CONFIG_APPLICOM is not set
> # CONFIG_SONYPI is not set
>
> #
> # Ftape, the floppy tape device driver
> #
> CONFIG_FTAPE=m
> # CONFIG_ZFTAPE is not set
> CONFIG_FT_NR_BUFFERS=3
> # CONFIG_FT_PROC_FS is not set
> CONFIG_FT_NORMAL_DEBUG=y
> # CONFIG_FT_FULL_DEBUG is not set
> # CONFIG_FT_NO_TRACE is not set
> # CONFIG_FT_NO_TRACE_AT_ALL is not set
>
> #
> # Hardware configuration
> #
> CONFIG_FT_STD_FDC=y
> # CONFIG_FT_MACH2 is not set
> # CONFIG_FT_PROBE_FC10 is not set
> # CONFIG_FT_ALT_FDC is not set
> CONFIG_FT_FDC_THR=8
> CONFIG_FT_FDC_MAX_RATE=2000
> CONFIG_FT_ALPHA_CLOCK=0
> # CONFIG_AGP is not set
> # CONFIG_DRM is not set
> # CONFIG_MWAVE is not set
>
> #
> # Multimedia devices
> #
> # CONFIG_VIDEO_DEV is not set
>
> #
> # File systems
> #
> # CONFIG_QUOTA is not set
> # CONFIG_AUTOFS_FS is not set
> # CONFIG_AUTOFS4_FS is not set
> # CONFIG_REISERFS_FS is not set
> # CONFIG_ADFS_FS is not set
> CONFIG_AFFS_FS=m
> # CONFIG_HFS_FS is not set
> # CONFIG_BFS_FS is not set
> # CONFIG_EXT3_FS is not set
> CONFIG_EXT3_FS=y
> # CONFIG_JBD is not set
> CONFIG_FAT_FS=y
> CONFIG_MSDOS_FS=y
> CONFIG_UMSDOS_FS=m
> CONFIG_VFAT_FS=m
> # CONFIG_EFS_FS is not set
> # CONFIG_CRAMFS is not set
> # CONFIG_TMPFS is not set
> # CONFIG_RAMFS is not set
> CONFIG_ISO9660_FS=m
> # CONFIG_JOLIET is not set
> # CONFIG_ZISOFS is not set
> CONFIG_MINIX_FS=y
> # CONFIG_VXFS_FS is not set
> # CONFIG_NTFS_FS is not set
> CONFIG_HPFS_FS=m
> CONFIG_PROC_FS=y
> # CONFIG_DEVFS_FS is not set
> # CONFIG_QNX4FS_FS is not set
> # CONFIG_ROMFS_FS is not set
> CONFIG_EXT2_FS=y
> CONFIG_SYSV_FS=m
> # CONFIG_UDF_FS is not set
> CONFIG_UFS_FS=m
> # CONFIG_UFS_FS_WRITE is not set
>
> #
> # Network File Systems
> #
> # CONFIG_CODA_FS is not set
> # CONFIG_INTERMEZZO_FS is not set
> CONFIG_NFS_FS=m
> # CONFIG_NFS_V3 is not set
> # CONFIG_NFSD is not set
> CONFIG_SUNRPC=m
> CONFIG_LOCKD=m
> CONFIG_SMB_FS=m
> # CONFIG_SMB_NLS_DEFAULT is not set
> CONFIG_NCP_FS=m
> # CONFIG_NCPFS_PACKET_SIGNING is not set
> # CONFIG_NCPFS_IOCTL_LOCKING is not set
> # CONFIG_NCPFS_STRONG is not set
> # CONFIG_NCPFS_NFS_NS is not set
> # CONFIG_NCPFS_OS2_NS is not set
> # CONFIG_NCPFS_SMALLDOS is not set
> # CONFIG_NCPFS_NLS is not set
> # CONFIG_NCPFS_EXTRAS is not set
> # CONFIG_ZISOFS_FS is not set
> # CONFIG_ZLIB_FS_INFLATE is not set
>
> #
> # Partition Types
> #
> # CONFIG_PARTITION_ADVANCED is not set
> CONFIG_MSDOS_PARTITION=y
> CONFIG_SMB_NLS=y
> CONFIG_NLS=y
>
> #
> # Native Language Support
> #
> CONFIG_NLS_DEFAULT="iso8859-1"
> # CONFIG_NLS_CODEPAGE_437 is not set
> # CONFIG_NLS_CODEPAGE_737 is not set
> # CONFIG_NLS_CODEPAGE_775 is not set
> # CONFIG_NLS_CODEPAGE_850 is not set
> # CONFIG_NLS_CODEPAGE_852 is not set
> # CONFIG_NLS_CODEPAGE_855 is not set
> # CONFIG_NLS_CODEPAGE_857 is not set
> # CONFIG_NLS_CODEPAGE_860 is not set
> # CONFIG_NLS_CODEPAGE_861 is not set
> # CONFIG_NLS_CODEPAGE_862 is not set
> # CONFIG_NLS_CODEPAGE_863 is not set
> # CONFIG_NLS_CODEPAGE_864 is not set
> # CONFIG_NLS_CODEPAGE_865 is not set
> # CONFIG_NLS_CODEPAGE_866 is not set
> # CONFIG_NLS_CODEPAGE_869 is not set
> # CONFIG_NLS_CODEPAGE_936 is not set
> # CONFIG_NLS_CODEPAGE_950 is not set
> # CONFIG_NLS_CODEPAGE_932 is not set
> # CONFIG_NLS_CODEPAGE_949 is not set
> # CONFIG_NLS_CODEPAGE_874 is not set
> # CONFIG_NLS_ISO8859_8 is not set
> # CONFIG_NLS_CODEPAGE_1250 is not set
> # CONFIG_NLS_CODEPAGE_1251 is not set
> # CONFIG_NLS_ISO8859_1 is not set
> # CONFIG_NLS_ISO8859_2 is not set
> # CONFIG_NLS_ISO8859_3 is not set
> # CONFIG_NLS_ISO8859_4 is not set
> # CONFIG_NLS_ISO8859_5 is not set
> # CONFIG_NLS_ISO8859_6 is not set
> # CONFIG_NLS_ISO8859_7 is not set
> # CONFIG_NLS_ISO8859_9 is not set
> # CONFIG_NLS_ISO8859_13 is not set
> # CONFIG_NLS_ISO8859_14 is not set
> # CONFIG_NLS_ISO8859_15 is not set
> # CONFIG_NLS_KOI8_R is not set
> # CONFIG_NLS_KOI8_U is not set
> # CONFIG_NLS_UTF8 is not set
>
> #
> # Sound
> #
> CONFIG_SOUND=m
> # CONFIG_SOUND_BT878 is not set
> # CONFIG_SOUND_CMPCI is not set
> # CONFIG_SOUND_EMU10K1 is not set
> # CONFIG_SOUND_FUSION is not set
> # CONFIG_SOUND_CS4281 is not set
> # CONFIG_SOUND_ES1370 is not set
> # CONFIG_SOUND_ES1371 is not set
> # CONFIG_SOUND_ESSSOLO1 is not set
> # CONFIG_SOUND_MAESTRO is not set
> # CONFIG_SOUND_MAESTRO3 is not set
> # CONFIG_SOUND_ICH is not set
> # CONFIG_SOUND_RME96XX is not set
> # CONFIG_SOUND_SONICVIBES is not set
> # CONFIG_SOUND_TRIDENT is not set
> # CONFIG_SOUND_MSNDCLAS is not set
> # CONFIG_SOUND_MSNDPIN is not set
> # CONFIG_SOUND_VIA82CXXX is not set
> # CONFIG_SOUND_OSS is not set
>
> #
> # USB support
> #
> # CONFIG_USB is not set
>
> #
> # USB Controllers
> #
>
> #
> # USB Device Class drivers
> #
>
> #
> # USB Human Interface Devices (HID)
> #
>
> #
> # Input core support is needed for USB HID
> #
>
> #
> # USB Imaging devices
> #
>
> #
> # USB Multimedia devices
> #
>
> #
> # Video4Linux support is needed for USB Multimedia device support
> #
>
> #
> # USB Network adaptors
> #
>
> #
> # USB port drivers
> #
>
> #
> # USB Serial Converter support
> #
>
> #
> # USB Miscellaneous drivers
> #
>
> #
> # Bluetooth support
> #
> # CONFIG_BLUEZ is not set
>
> #
> # Kernel hacking
> #
> # CONFIG_DEBUG_KER
>
>
>
Did you ever try the old fashioned way?
cd /usr/src/linux-x.x.x
make menuconfig
make dep && make clean bzImage modules modules_install
mv /boot/kernelimage /boot/kernelimage.orig
cp /usr/src/linux-x.x.x/arch/i386/boot/bzImage /boot
Prost,
Klaus
Reply to: