Re: USB mouse only moves up and down (solved)
I solved it, apparently the problem was the usbmouse module, modprobe -r
usbmouse...
Mouse works.
Riaan
On Fri, 2002-06-14 at 13:47, Riaan Rottier wrote:
> Hi
>
> I installed a USB optical mouse on my computer. After going through the
> whole process as described in www.linux-usb.com the mouse worked but
> only moving up and down when I move the mouse side to side. Neither the
> buttons nor the up and down movement had any effect. lsmod gives:
>
>
> Module Size Used by Not tainted
> mousedev 3808 1
> hid 12544 0 (unused)
> usbmouse 1792 0 (unused)
> input 3264 0 [mousedev hid usbmouse]
> usb-ohci 17696 0 (unused)
> tulip_cb 31872 2
> cb_enabler 2528 2 [tulip_cb]
> ds 6688 2 [cb_enabler]
> i82365 22288 2
> pcmcia_core 41408 0 [cb_enabler ds i82365]
> smbfs 30496 0 (unused)
> sound 53260 0 (unused)
> trident 26624 2
> soundcore 3492 4 [sound trident]
> ac97_codec 9568 0 [trident]
> vfat 9276 2
> fat 29112 0 [vfat]
>
> and /etc/init.d/hotplug status
>
> USB Status for kernel: Linux 2.4.17 i686
>
> USB up; bus count is 1
> T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
> P: Vendor=0000 ProdID=0000 Rev= 0.00
> S: Product=USB OHCI Root Hub
> S: SerialNumber=d48a1000
> I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
> T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
> P: Vendor=0458 ProdID=001a Rev= 1.00
> S: Manufacturer=KYE
> S: Product=WebScroll Eye
> I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usb_mouse
>
> USB Drivers Loaded:
> usbdevfs
> hub
> usb_mouse
> hid
>
> khubd/hotplug thread:
> F S UID PID PPID C PRI NI ADDR SZ WCHAN TTY TIME CMD
> 040 S 0 8 1 0 69 0 - 0 usb_hu ? 00:00:00khubd
>
> Any suggestions ???
>
>
> TNX
> Riaan
>
>
> --
> To UNSUBSCRIBE, email to debian-user-request@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
>
--
To UNSUBSCRIBE, email to debian-user-request@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Reply to: