can't get epson perfection 1650 scanner to work, xsane just sits there... no gui comes up
this is on woody:
$ ls -al /dev/usbscanner0
crw-rw-rw- 1 root root 180, 48 Jun 13 13:29 /dev/usbscanner0
cat /etc/sane.d/epson.conf
# epson.conf
#
# here are some examples for how to configure the EPSON backend
#
# SCSI scanner:
#scsi EPSON
#
# Parallel port scanner:
#pio 0x278
#pio 0x378
#pio 0x3BC
#
# USB scanner - only enable this if you have an EPSON scanner. It could
# otherwise block your non-EPSON scanner from being
# recognized.
usb /dev/usbscanner0
If I set the environment variable SANE_DEBUG_EPSON=128
I get when running xsane or xscanimage or scanimage:
wtautz@kodaira:~/.ssh$ xsane
[sanei_debug] Setting debug level of epson to 128.
[epson] sane_init: sane-backends 1.0.7
[epson] sane_init, ># epson.conf<
[epson] sane_init, >#<
[epson] sane_init, ># here are some examples for how to configure the EPSON
backend<
[epson] sane_init, >#<
[epson] sane_init, ># SCSI scanner:<
[epson] sane_init, >#scsi EPSON<
[epson] sane_init, >#<
[epson] sane_init, ># Parallel port scanner:<
[epson] sane_init, >#pio 0x278<
[epson] sane_init, >#pio 0x378<
[epson] sane_init, >#pio 0x3BC<
[epson] sane_init, >#<
[epson] sane_init, ># USB scanner - only enable this if you have an EPSON
scanner. It could<
[epson] sane_init, ># otherwise block your non-EPSON scanner from
being<
[epson] sane_init, ># recognized.<
[epson] sane_init, >usb /dev/usbscanner0<
[epson] sane_init, >usb /dev/usbscanner0<
[epson] attach(usb /dev/usbscanner0)
[epson] SANE Epson Backend v0.2.19 - 2002-01-18
[epson] attach(usb /dev/usbscanner0)
[epson] attach: opening usb /dev/usbscanner0
[epson] send buf, size = 2
[epson] buf[0] 1b .
[epson] buf[1] 40 @
perhaps it really can't find the device?
sane-find-scanner: found USB scanner (vendor = 0x04b8, product = 0x0110) at device /dev/usbscanner0
Note that I did:
modprobe scanner vendor=0x04b8 product=0x0110
wtautz@kodaira:~/.ssh$ lsmod
Module Size Used by Not tainted
sg 28196 0 (autoclean) (unused)
scsi_mod 85304 1 (autoclean) [sg]
scanner 8448 0
hid 18720 0 (unused)
loop 8144 0 (autoclean)
mousedev 3808 1
input 3360 0 [hid mousedev]
usb-uhci 20932 0 (unused)
usbcore 48416 1 [scanner hid usb-uhci]
3c59x 25064 1
unix 13700 151 (autoclean)
ide-disk 6592 6 (autoclean)
ide-probe-mod 7984 0 (autoclean)
ide-mod 129452 6 (autoclean) [ide-disk ide-probe-mod]
ext2 30368 0 (autoclean) (unused)
ext3 56480 5 (autoclean)
jbd 34856 5 (autoclean) [ext3]
--
To UNSUBSCRIBE, email to debian-user-request@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Reply to: