Re: iomega parallel port zip drive
On Friday 07 June 2002 09:13 pm, robert jorgenson wrote:
> Ok i had this working fine under my 2.2 distrobution kernel(debian) with
> modprobe ppa. i Decided to compile a 2.4 kernel and i an trying to get it
> to work correctly. Right now i have scsi support enabled, scsi disk support
> enabled, the ppa module compiled in as a module, and parallel printing
> enabled as a module(as per the zip drive mini-hwoto). When i try to mount
> /dev/sda4 it says that /dev/sda4 is not a valid block device. I have kernel
> compiled about 6 times tonight and i would really like next time to be last
> time, at least for tonight :) andone know what might be wrong?
i'm not sure if the situation is exactly the same as in my case, but since
the switch from a 2.2 to the 2.4 kernel, i have to use a full mount command
specifying the fstype to get the zip drive up, as in:
mount -t<fstype (e.g. vfat or ext2)> /dev/sda4 /zip
as opposed to previously using a simple mount /zip, even though the fstab
entry for the /zip drive is auto
/dev/sda4 /zip auto defaults,rw,users,noauto 0 0
i have ppa support complied into the kernel.
ben
--
To UNSUBSCRIBE, email to debian-user-request@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Reply to: