cdrom: "Media not found"
Hi,
i'm running Potato 2.2.17.
My cdrom stopped working yesterday, for no apparent reason.
The error messages vary. Usually, it's "No media found" but sometimes
it says
something about a bad superblock and trying to mount a logical drive.
I'm stumped on how to remedy this. I've tried both home-brewed cd-r's
and the
"official" Potato discs, both of which worked fine until yesterday.
Below is my fstab and dmesg.
***************************************
# /etc/fstab: static file system information.
#
#
<file system> <mount point> <type> <options>
<dump> <pass>
/dev/hda1 / ext2 defaults,errors=
remount-ro 0 1
/dev/hda2 none swap sw
0 0
proc /proc proc defaults
0 0
/dev/fd0 /floppy auto defaults,user,noauto
0 0
/dev/cdrom /cdrom iso9660 defaults,ro,user,noauto 0
0
/dev/hdb1 /home ext2 rw
0 2
**********************************************************************
*********************************
Linux version 2.2.17 (herbert@arnor) (gcc version 2.95.2 20000313 (
Debian GNU/Linux)) #1 Sun Jun 25 09:24:41 EST 2000
Console: colour VGA+ 80x25
Calibrating delay loop... 119.60 BogoMIPS
Memory: 126920k/131072k available (1732k kernel code, 416k reserved,
1864k data, 140k init)
Checking if this processor honours the WP bit even in supervisor mode...
Ok.
Dentry hash table entries: 16384 (order 5, 128k)
Buffer cache hash table entries: 131072 (order 7, 512k)
Page cache hash table entries: 32768 (order 5, 128k)
VFS: Diskquotas version dquot_6.4.0 initialized
CPU: Cyrix 6x86 2x Core/Bus Clock stepping 07
Checking 386/387 coupling... OK, FPU using exception 16 error
reporting.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au)
PCI: PCI BIOS revision 2.10 entry at 0xfdb91
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 131072 bhash 65536)
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
apm: BIOS version 1.2 Flags 0x0b (Driver version 1.13)
apm: disabled on user request.
Real Time Clock Driver v1.09
RAM disk driver initialized: 16 RAM disks of 4096K size
loop:
registered device at major 7
PIIX3: IDE controller on PCI bus 00 dev 39
PIIX3: not 100% native mode:
will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
hda: SAMSUNG WNR-31601A (1600MB), ATA DISK drive
hdb: Conner Peripherals 1275MB - CFS1275A, ATA DISK drive
hdc: CD-ROM 48X/AKU, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on
irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: SAMSUNG WNR-31601A (1600MB), 1536MB w/256kB Cache, CHS=780/64/63
hdb: Conner Peripherals 1275MB - CFS1275A, 1219MB w/64kB Cache, CHS=
619/64/63
hdc: ATAPI 48X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver
Revision: 3.11
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
scsi: <fdomain> Detection failed (no card)
NCR53c406a: no available ports found
sym53c416.c: Version 1.0.0
Failed initialization of WD-7000 SCSI card!
IBM MCA SCSI: No Microchannel-bus support present -> Aborting.
megaraid: v107 (December 22, 1999)
aec671x_detect:
3w-xxxx: tw_findcards(): No cards found.
scsi : 0
hosts.
scsi : detected total.
Partition check:
hda: hda1 hda2
hdb: hdb1
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel
memory: 140k freed
NET4: Unix domain sockets 1.0 for Linux NET4.0.
Adding Swap: 302392k swap-space (priority -1)
NTFS version 000607
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
CSLIP: code copyright 1989 Regents of the University of California
PPP: version 2.3.7 (demand dialling)
PPP line discipline registered.
PPP BSD Compression module registered
VFS: Disk change detected on device fd(2,0)
--
Tom Schuetz | schuetz@mind.net
--
To UNSUBSCRIBE, email to debian-user-request@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Reply to: