strange PPPd problems (dialing out)
Hi everyone!
I'm having a very strange problem with getting pppd to work for outgoing connections. I have two ISA modems installed, on ttyS1 and ttyS3. I have no problems on ttyS1, but on ttyS3, I cannot ping the remote server - I connect as usual, get assigned an IP, etc. but I still cannot ping anything (using the IP address)! The connection shows up in ifconfig. Using minicom, I can dialout and connect to remove systems with both modems and have no problems, using the same configuration. I'm also running mgetty, and have no problems receiving faxes, etc on either modem. I've tried switching the phone lines too. Does anyone have *ANY* idea of what could be the problem or how to further investigate it? I copied all kinds of info below.
Any help would be greatly appreciated. Thank you!
-Paul
# pon MichNet
(connecting with ttyS3)
Apr 25 22:50:54 pinheiro pppd[30376]: Serial connection established.
Apr 25 22:50:54 pinheiro pppd[30376]: using channel 18
Apr 25 22:50:54 pinheiro pppd[30376]: Using interface ppp0
Apr 25 22:50:54 pinheiro pppd[30376]: Connect: ppp0 <--> /dev/ttyS3
Apr 25 22:50:55 pinheiro pppd[30376]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xa84f3372> <pcomp> <accomp>]
Apr 25 22:50:55 pinheiro pppd[30376]: rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0xa84f3372> <pcomp> <accomp>]
Apr 25 22:50:56 pinheiro pppd[30376]: rcvd [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0xa2f50444> <pcomp> <accomp>]
Apr 25 22:50:56 pinheiro pppd[30376]: sent [LCP ConfAck id=0x2 <asyncmap 0x0> <magic 0xa2f50444> <pcomp> <accomp>]
Apr 25 22:50:56 pinheiro pppd[30376]: sent [LCP EchoReq id=0x0 magic=0xa84f3372]Apr 25 22:50:56 pinheiro pppd[30376]: sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <compress VJ 0f 01>]
Apr 25 22:50:56 pinheiro pppd[30376]: sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
Apr 25 22:50:57 pinheiro pppd[30376]: rcvd [LCP EchoRep id=0x0 magic=0xa2f50444]Apr 25 22:50:57 pinheiro pppd[30376]: rcvd [IPCP ConfReq id=0x1 <compress VJ 0f 00> <addr 35.9.10.68>]
Apr 25 22:50:57 pinheiro pppd[30376]: sent [IPCP ConfAck id=0x1 <compress VJ 0f 00> <addr 35.9.10.68>]
Apr 25 22:50:57 pinheiro pppd[30376]: rcvd [IPCP ConfNak id=0x1 <addr 35.9.12.180>]
Apr 25 22:50:57 pinheiro pppd[30376]: sent [IPCP ConfReq id=0x2 <addr 35.9.12.180> <compress VJ 0f 01>]
Apr 25 22:50:57 pinheiro pppd[30376]: rcvd [LCP ProtRej id=0x3 80 fd 01 01 00 0f 1a 04 78 00 18 04 78 00 15 03 2f]
Apr 25 22:50:57 pinheiro pppd[30376]: rcvd [IPCP ConfAck id=0x2 <addr 35.9.12.180> <compress VJ 0f 01>]
Apr 25 22:50:57 pinheiro pppd[30376]: Cannot determine ethernet address for proxy ARP
Apr 25 22:50:57 pinheiro pppd[30376]: local IP address 35.9.12.180
Apr 25 22:50:57 pinheiro pppd[30376]: remote IP address 35.9.10.68
Apr 25 22:50:57 pinheiro pppd[30376]: Script /etc/ppp/ip-up started (pid 30379)
Apr 25 22:50:58 pinheiro pppd[30376]: Script /etc/ppp/ip-up finished (pid 30379), status = 0x0
# ifconfig
eth1 Link encap:Ethernet HWaddr 00:20:78:06:1E:DB
inet addr:192.168.100.1 Bcast:192.168.100.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:22413343 errors:5 dropped:0 overruns:5 frame:5
TX packets:23670321 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:691607972 (659.5 MiB) TX bytes:2679608120 (2.4 GiB)
Interrupt:10 Base address:0x9000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:4657100 errors:0 dropped:0 overruns:0 frame:0
TX packets:4657100 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:781394759 (745.1 MiB) TX bytes:781394759 (745.1 MiB)
ppp0 Link encap:Point-to-Point Protocol
inet addr:35.9.12.180 P-t-P:35.9.10.68 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:5 errors:0 dropped:0 overruns:0 frame:0
TX packets:7 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:586 (586.0 b) TX bytes:291 (291.0 b)
LINUX CONFIGURATION:
Debian 'testing' distribution, Linux/i386 2.4.18-xfs (and using devfsd)
pppd (deb): 2.4.1.uus-4
using Debian default /etc/ppp/options file
# cat /etc/ppp/ppers/MichNet (same script)
hide-password
noauth
connect "/usr/sbin/chat -v -f /etc/chatscripts/MichNet"
debug
/dev/ttyS3 <-- this is the ONLY option I changed!
115200
defaultroute
noipdefault
remotename MichNet
user <username>
idle 300
# iptables -L
Chain INPUT (policy ACCEPT)
target prot opt source destination
Chain FORWARD (policy ACCEPT)
target prot opt source destination
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
# iptables -L -t nat
Chain PREROUTING (policy ACCEPT)
target prot opt source destination
Chain POSTROUTING (policy ACCEPT)
target prot opt source destination
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
HARDWARE CONFIGURATION:
/dev/ttyS1: SupraFAXModem 288i
# setserial -a /dev/ttyS1
/dev/ttyS1, Line 1, UART: 16550A, Port: 0x02f8, IRQ: 3
Baud_base: 115200, close_delay: 50, divisor: 0
closing_wait: 3000
Flags: spd_normal skip_test
/dev/ttyS3: USR Sportster V.34 28800
y# setserial -a /dev/ttyS3
/dev/ttyS3, Line 3, UART: 16550A, Port: 0x02e8, IRQ: 5
Baud_base: 115200, close_delay: 50, divisor: 0
closing_wait: 3000
Flags: spd_normal skip_test
# cat /proc/interrupts
... snipped ...
3: 1424982 XT-PIC serial <-- SupraFAXModem
4: 19163368 XT-PIC serial <-- UPS
5: 14174 XT-PIC serial <-- USR Sposter
... snipped ...
# cat /proc/ioports
... snipped ...
02e8-02ef : serial(set)
02f8-02ff : serial(set)
... snipped ...
03f8-03ff : serial(set)
... snipped ...
--
To UNSUBSCRIBE, email to debian-user-request@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Reply to: