RE:Serial port question
stan writes:
> I'm porting a small application that reads some temperature probes conected
> to srvial ports from HP-UX to Debian Woody.
>
> It opens up the serial ports, sends a few charatcers, and then listens for
> the reply. What serial port device names should I be using for the 2
> onboard serail ports on my mother (com1 & com2)?
/dev/ttyS0 and /dev/ttyS1, respectively. If you have a USB<->Serial
convertor, the first of those ports will be /dev/ttyUSB0, assuming you
have that device node.
Andrew.
Reply to: