Xfree86 3.3.6 on i810 : Getting error
Hello all,
In my potato with xfree86-3.3.6, running inteln810e, I
tried to install xserver using the rpms downloaded
from intel's site, converted to debin using alien. I
got the instructions from our list members. After
installation, when i try to start X I am getting error
as shown below and it is not starting up.
-------------------------------------------------------
XFree86 Version 3.3.6 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: January 8 2000
If the server is older than 6-12 months, or if your
card is newer
than the above date, look for a newer version before
reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.2.14-va.4.4-i586 i686 [ELF]
Configured drivers:
SVGA: server for SVGA graphics adaptors (Patchlevel
1):
NV1, STG2000, RIVA 128, RIVA TNT, RIVA TNT2,
RIVA ULTRA TNT2,
RIVA VANTA, RIVA ULTRA VANTA, RIVA INTEGRATED,
GeForce 256,
GeForce DDR, Quadro, ET4000, ET4000W32,
ET4000W32i, ET4000W32i_rev_b,
ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a,
ET4000W32p_rev_b,
ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000,
ET6100, et3000, pvga1,
wd90c00, wd90c10, wd90c30, wd90c24, wd90c31,
wd90c33, gvga, r128, ati,
sis86c201, sis86c202, sis86c205, sis86c215,
sis86c225, sis5597,
sis5598, sis6326, sis530, sis620, sis300,
sis630, sis540, tvga8200lx,
tvga8800cs, tvga8900b, tvga8900c, tvga8900cl,
tvga8900d, tvga9000,
tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi,
tgui9420, tgui9420dgi,
tgui9430dgi, tgui9440agi, cyber9320, tgui9660,
tgui9680, tgui9682,
tgui9685, cyber9382, cyber9385, cyber9388,
cyber9397, cyber9520,
cyber9525, 3dimage975, 3dimage985, cyber9397dvd,
blade3d, cyberblade,
clgd5420, clgd5422, clgd5424, clgd5426,
clgd5428, clgd5429, clgd5430,
clgd5434, clgd5436, clgd5446, clgd5480,
clgd5462, clgd5464, clgd5465,
clgd6205, clgd6215, clgd6225, clgd6235,
clgd7541, clgd7542, clgd7543,
clgd7548, clgd7555, clgd7556, ncr77c22,
ncr77c22e, cpq_avga, mga2064w,
mga1064sg, mga2164w, mga2164w AGP, mgag200,
mgag100, mgag400, oti067,
oti077, oti087, oti037c, al2101, ali2228,
ali2301, ali2302, ali2308,
ali2401, cl6410, cl6412, cl6420, cl6440, video7,
ark1000vl, ark1000pv,
ark2000pv, ark2000mt, mx, realtek, s3_savage,
s3_virge, AP6422, AT24,
AT3D, s3_svga, NM2070, NM2090, NM2093, NM2097,
NM2160, NM2200,
ct65520, ct65525, ct65530, ct65535, ct65540,
ct65545, ct65546,
ct65548, ct65550, ct65554, ct65555, ct68554,
ct69000, ct64200,
ct64300, mediagx, V1000, V2100, V2200, p9100,
spc8110, i740, i740_pci,
i810, i810-dc100, i810e, Voodoo Banshee,
Voodoo3, smi, generic
(using VT number 7)
XF86Config: /usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for
probed/default values
(**) XKB: keymap: "xfree86(us)" (overrides other XKB
settings)
(**) Mouse: type: PS/2, device: /dev/psaux, buttons: 3
(**) Mouse: 3 button emulation (timeout: 50ms)
(**) SVGA: Graphics device ID: "i810"
(**) SVGA: Monitor ID: "Compaq"
(--) SVGA: Mode "1024x768" needs vert refresh rate of
86.96 Hz. Deleted.
(--) SVGA: Mode "640x400" needs hsync freq of 37.86
kHz. Deleted.
(--) SVGA: Mode "640x480" needs hsync freq of 36.46
kHz. Deleted.
(--) SVGA: Mode "640x480" needs hsync freq of 37.50
kHz. Deleted.
(--) SVGA: Mode "800x600" needs hsync freq of 37.88
kHz. Deleted.
(--) SVGA: Mode "640x480" needs hsync freq of 43.27
kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 43.92
kHz. Deleted.
(--) SVGA: Mode "800x600" needs hsync freq of 48.08
kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 48.36
kHz. Deleted.
(--) SVGA: Mode "640x480" needs hsync freq of 53.01
kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 53.51
kHz. Deleted.
(--) SVGA: Mode "800x600" needs hsync freq of 55.84
kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 56.48
kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 51.02
kHz. Deleted.
(--) SVGA: Mode "800x600" needs hsync freq of 64.02
kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 62.50
kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 62.42
kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 64.25
kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 70.24
kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 70.88
kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 74.59
kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 75.00
kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 76.01
kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 78.86
kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 80.21
kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 81.13
kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 87.50
kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 89.62
kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 91.15
kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 93.75
kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 105.77
kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 107.16
kHz. Deleted.
(--) SVGA: Mode "1800X1440" needs hsync freq of 96.15
kHz. Deleted.
(--) SVGA: Mode "1800X1440" needs hsync freq of 104.52
kHz. Deleted.
(--) SVGA: Mode "512x384" needs vert refresh rate of
77.97 Hz. Deleted.
(--) SVGA: Mode "512x384" needs hsync freq of 34.38
kHz. Deleted.
(--) SVGA: Mode "320x240" needs hsync freq of 39.38
kHz. Deleted.
(--) SVGA: Mode "400x300" needs hsync freq of 37.88
kHz. Deleted.
(--) SVGA: Mode "400x300" needs hsync freq of 48.08
kHz. Deleted.
(--) SVGA: Mode "480x300" needs hsync freq of 37.80
kHz. Deleted.
(--) SVGA: Mode "480x300" needs hsync freq of 39.56
kHz. Deleted.
(--) SVGA: Mode "480x300" needs hsync freq of 48.00
kHz. Deleted.
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/100dpi/,/usr/X11R6/lib/X11/fonts/75dpi/"
(--) SVGA: PCI: Intel Unknown chipset (0x7125) rev 3,
Memory @ 0x44000000, 0x40300000
(--) SVGA: error doing ioctl(GARTIOCINFO): Invalid
argument
Fatal server error:
Aborting
When reporting a problem related to a server crash,
please send
the full server output, not just the last messages
-------------------------------------------------------
What could be the reason ? How can I solve it.
Thanks in advance,
Deb
__________________________________________________
Do You Yahoo!?
Get personalized email addresses from Yahoo! Mail
http://personal.mail.yahoo.com/
Reply to: