Re: Alcatel SpeedTouch USB Modem Setup...

To: "Ben Hill" <ben@javacoder.net>, <debian-user@lists.debian.org>
Subject: Re: Alcatel SpeedTouch USB Modem Setup...
From: Nick Sanders <sandersn@btinternet.com>
Date: Mon, 3 Dec 2001 14:02:37 +0000
Message-id: <[🔎] E16Ati4-0001Lu-00@protactinium.btinternet.com>
In-reply-to: <[🔎] 003201c17c00$c381c330$510423d9@kungfoo>
References: <[🔎] 003201c17c00$c381c330$510423d9@kungfoo>
Check out /var/log/syslog that's the important one (When I changed from 
Redhat to Debian that was one of the most annoying mistakes I made)

If you need any more help I'd be happy to help.

Nick

On Monday 03 December 2001 1:45 pm, Ben Hill wrote:
> Hi,
>
> As a few of you will know ;), I have been trying to set up my Alcatel
> SpeedTouch
> USB modem for about 2 weeks now and I must be getting close! :)
>
> I have the usb hotplugging working, the speedmgmt stuff working etc. The
> problem is that I still can't connect to the internet. The process is that
> I do a lsmod and make sure that the speedtouch module and the usb-uhci
> modules are there, then I plug the USB modem in. After that do a ps-ef |
> grep mgmt to see if the speedmgmt driver is running, it is.
>
> Then when I have watched the modem light sync in the right order, I run
> "pppd" manually. The output is something like:
>
> pppd[1234]: PPPoATM plugin_init
> pppd[1234]: PPPoATM setdevname_pppoatm
> pppd[1234]: PPPoATM setdevname_pppoatm - SUCCESS
>
> ...then nothing else. As you can see the line:
>
> Dec 3 13:29:30 kungfoo kernel: PPP generic driver version 2.4.1
>
> ...is in the /var/log/messages file.
>
> I have included the /var/log/messages section all pertaining to a reboot
> and then plugging in the modem and running pppd.
>
> Any help would be great! And thanks to all you that have helped me already!
>
> Cheers,
>
> Ben
>
> ---
>
> b e n @ j a v a c o d e r . n e t   -  w w w . j a v a c o d e r . n e t
>
> "The reader is entertained by the journey of another, but the writer is the
> changer of worlds"
> - D'Ni proverb
>
>
> ---START OF /VAR/LOG/MESSAGES---
> Dec 3 13:19:08 kungfoo syslogd 1.3-3#33.1: restart.
> Dec 3 13:19:08 kungfoo kernel: klogd 1.3-3#33.1, log source = /proc/kmsg
> started.
> Dec 3 13:19:08 kungfoo kernel: Inspecting /boot/System.map-2.4.14
> Dec 3 13:19:08 kungfoo kernel: Loaded 16764 symbols from
> /boot/System.map-2.4.14.
> Dec 3 13:19:08 kungfoo kernel: Symbols match kernel version 2.4.14.
> Dec 3 13:19:08 kungfoo kernel: Loaded 5 symbols from 1 module.
> Dec 3 13:19:08 kungfoo kernel: Linux version 2.4.14 (root@kungfoo) (gcc
> version 2.95.2 20000220 (Debian GNU/Linux)) #20 Sun Dec 2 23:32:01 GMT 2001
> Dec 3 13:19:08 kungfoo kernel: BIOS-provided physical RAM map:
> Dec 3 13:19:08 kungfoo kernel: BIOS-e820: 0000000000000000 -
> 000000000009fc00 (usable)
> Dec 3 13:19:08 kungfoo kernel: BIOS-e820: 000000000009fc00 -
> 00000000000a0000 (reserved)
> Dec 3 13:19:08 kungfoo kernel: BIOS-e820: 00000000000f0000 -
> 0000000000100000 (reserved)
> Dec 3 13:19:08 kungfoo kernel: BIOS-e820: 0000000000100000 -
> 00000000077f0000 (usable)
> Dec 3 13:19:08 kungfoo kernel: BIOS-e820: 00000000077f0000 -
> 00000000077f8000 (ACPI data)
> Dec 3 13:19:08 kungfoo kernel: BIOS-e820: 00000000077f8000 -
> 0000000007800000 (ACPI NVS)
> Dec 3 13:19:08 kungfoo kernel: BIOS-e820: 00000000ffff0000 -
> 0000000100000000 (reserved)
> Dec 3 13:19:08 kungfoo kernel: On node 0 totalpages: 30704
> Dec 3 13:19:08 kungfoo kernel: zone(0): 4096 pages.
> Dec 3 13:19:08 kungfoo kernel: zone(1): 26608 pages.
> Dec 3 13:19:08 kungfoo kernel: zone(2): 0 pages.
> Dec 3 13:19:08 kungfoo kernel: Kernel command line: auto BOOT_IMAGE=Linux
> ro root=301 BOOT_FILE=/vmlinuz
> Dec 3 13:19:08 kungfoo kernel: Initializing CPU#0
> Dec 3 13:19:08 kungfoo kernel: Detected 846.865 MHz processor.
> Dec 3 13:19:08 kungfoo kernel: Console: colour VGA+ 80x25
> Dec 3 13:19:08 kungfoo kernel: Calibrating delay loop... 1690.82 BogoMIPS
> Dec 3 13:19:08 kungfoo kernel: Memory: 118272k/122816k available (1358k
> kernel code, 4156k reserved, 437k data, 220k init, 0k highmem)
> Dec 3 13:19:08 kungfoo kernel: Dentry-cache hash table entries: 16384
> (order: 5, 131072 bytes)
> Dec 3 13:19:08 kungfoo kernel: Inode-cache hash table entries: 8192 (order:
> 4, 65536 bytes)
> Dec 3 13:19:08 kungfoo kernel: Mount-cache hash table entries: 2048 (order:
> 2, 16384 bytes)
> Dec 3 13:19:08 kungfoo kernel: Buffer-cache hash table entries: 4096
> (order: 2, 16384 bytes)
> Dec 3 13:19:08 kungfoo kernel: Page-cache hash table entries: 32768 (order:
> 5, 131072 bytes)
> Dec 3 13:19:08 kungfoo kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
> Dec 3 13:19:08 kungfoo kernel: CPU: L2 cache: 256K
> Dec 3 13:19:08 kungfoo kernel: Intel machine check architecture supported.
> Dec 3 13:19:08 kungfoo kernel: Intel machine check reporting enabled on
> CPU#0.
> Dec 3 13:19:08 kungfoo kernel: CPU serial number disabled.
> Dec 3 13:19:08 kungfoo kernel: CPU: Intel Pentium III (Coppermine) stepping
> 0a
> Dec 3 13:19:08 kungfoo kernel: Enabling fast FPU save and restore... done.
> Dec 3 13:19:08 kungfoo kernel: Enabling unmasked SIMD FPU exception
> support... done.
> Dec 3 13:19:08 kungfoo kernel: Checking 'hlt' instruction... OK.
> Dec 3 13:19:08 kungfoo kernel: POSIX conformance testing by UNIFIX
> Dec 3 13:19:08 kungfoo kernel: PCI: PCI BIOS revision 2.10 entry at
> 0xf0200, last bus=1
> Dec 3 13:19:08 kungfoo kernel: PCI: Using configuration type 1
> Dec 3 13:19:08 kungfoo kernel: PCI: Probing PCI hardware
> Dec 3 13:19:08 kungfoo kernel: isapnp: Scanning for PnP cards...
> Dec 3 13:19:08 kungfoo kernel: isapnp: No Plug & Play device found
> Dec 3 13:19:08 kungfoo kernel: Linux NET4.0 for Linux 2.4
> Dec 3 13:19:08 kungfoo kernel: Based upon Swansea University Computer
> Society NET3.039
> Dec 3 13:19:08 kungfoo kernel: Starting kswapd
> Dec 3 13:19:08 kungfoo kernel: NTFS driver v1.1.20 [Flags: R/O]
> Dec 3 13:19:08 kungfoo kernel: pty: 256 Unix98 ptys configured
> Dec 3 13:19:08 kungfoo kernel: Serial driver version 5.05c (2001-07-08)
> with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
> Dec 3 13:19:08 kungfoo kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A
> Dec 3 13:19:08 kungfoo kernel: block: 128 slots per queue, batch=32
> Dec 3 13:19:08 kungfoo kernel: Uniform Multi-Platform E-IDE driver
> Revision: 6.31
> Dec 3 13:19:08 kungfoo kernel: ide: Assuming 33MHz system bus speed for PIO
> modes; override with idebus=xx
> Dec 3 13:19:08 kungfoo kernel: ALI15X3: IDE controller on PCI bus 00 dev 80
> Dec 3 13:19:08 kungfoo kernel: ALI15X3: chipset revision 195
> Dec 3 13:19:08 kungfoo kernel: ALI15X3: not 100%% native mode: will probe
> irqs later
> Dec 3 13:19:08 kungfoo kernel: ALI15X3: simplex device: DMA disabled
> Dec 3 13:19:08 kungfoo kernel: ide0: ALI15X3 Bus-Master DMA disabled (BIOS)
> Dec 3 13:19:08 kungfoo kernel: ALI15X3: simplex device: DMA disabled
> Dec 3 13:19:08 kungfoo kernel: ide1: ALI15X3 Bus-Master DMA disabled (BIOS)
> Dec 3 13:19:08 kungfoo kernel: hda: IBM-DJSA-220, ATA DISK drive
> Dec 3 13:19:08 kungfoo kernel: hdc: CD-224E, ATAPI CD/DVD-ROM drive
> Dec 3 13:19:08 kungfoo kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> Dec 3 13:19:08 kungfoo kernel: ide1 at 0x170-0x177,0x376 on irq 15
> Dec 3 13:19:08 kungfoo kernel: hda: 39070080 sectors (20004 MB) w/1874KiB
> Cache, CHS=2432/255/63
> Dec 3 13:19:08 kungfoo kernel: hdc: ATAPI 24X CD-ROM drive, 128kB Cache
> Dec 3 13:19:08 kungfoo kernel: Uniform CD-ROM driver Revision: 3.12
> Dec 3 13:19:08 kungfoo kernel: Partition check:
> Dec 3 13:19:08 kungfoo kernel: hda: hda1 hda2 < hda5 >
> Dec 3 13:19:08 kungfoo kernel: Floppy drive(s): fd0 is 1.44M
> Dec 3 13:19:08 kungfoo kernel: FDC 0 is a post-1991 82077
> Dec 3 13:19:08 kungfoo kernel: eepro100.c:v1.09j-t 9/29/99 Donald Becker
> http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
> Dec 3 13:19:08 kungfoo kernel: eepro100.c: $Revision: 1.36 $ 2000/11/17
> Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
> Dec 3 13:19:08 kungfoo kernel: PCI: Guessed IRQ 11 for device 00:0a.0
> Dec 3 13:19:08 kungfoo kernel: PCI: Sharing IRQ 11 with 00:0b.0
> Dec 3 13:19:08 kungfoo kernel: eth0: OEM i82557/i82558 10/100 Ethernet,
> 00:D0:59:59:47:CE, IRQ 11.
> Dec 3 13:19:08 kungfoo kernel: Receiver lock-up bug exists -- enabling
> work-around.
> Dec 3 13:19:08 kungfoo kernel: Board assembly 620014-149, Physical
> connectors present: RJ45
> Dec 3 13:19:08 kungfoo kernel: Primary interface chip i82555 PHY #1.
> Dec 3 13:19:08 kungfoo kernel: General self-test: passed.
> Dec 3 13:19:08 kungfoo kernel: Serial sub-system self-test: passed.
> Dec 3 13:19:08 kungfoo kernel: Internal registers self-test: passed.
> Dec 3 13:19:08 kungfoo kernel: ROM checksum self-test: passed (0x04f4518b).
> Dec 3 13:19:08 kungfoo kernel: Receiver lock-up workaround activated.
> Dec 3 13:19:08 kungfoo kernel: Linux agpgart interface v0.99 (c) Jeff
> Hartmann
> Dec 3 13:19:08 kungfoo kernel: agpgart: Maximum main memory to use for agp
> memory: 86M
> Dec 3 13:19:08 kungfoo kernel: agpgart: Detected Ali M1632 chipset
> Dec 3 13:19:08 kungfoo kernel: agpgart: AGP aperture is 64M @ 0xe0000000
> Dec 3 13:19:08 kungfoo kernel: [drm] Initialized tdfx 1.0.0 20010216 on
> minor 0
> Dec 3 13:19:08 kungfoo kernel: [drm] AGP 0.99 on ALi M1621 @ 0xe0000000
> 64MB Dec 3 13:19:08 kungfoo kernel: [drm] Initialized radeon 1.1.1 20010405
> on minor 1
> Dec 3 13:19:08 kungfoo kernel: SCSI subsystem driver Revision: 1.00
> Dec 3 13:19:08 kungfoo kernel: es1371: version v0.30 time 22:39:30 Nov 30
> 2001
> Dec 3 13:19:08 kungfoo kernel: Linux Kernel Card Services 3.1.22
> Dec 3 13:19:08 kungfoo kernel: options: [pci] [cardbus] [pm]
> Dec 3 13:19:08 kungfoo kernel: PCI: Guessed IRQ 11 for device 00:13.0
> Dec 3 13:19:08 kungfoo kernel: PCI: Sharing IRQ 11 with 00:13.1
> Dec 3 13:19:08 kungfoo kernel: PCI: Guessed IRQ 11 for device 00:13.1
> Dec 3 13:19:08 kungfoo kernel: PCI: Sharing IRQ 11 with 00:13.0
> Dec 3 13:19:08 kungfoo kernel: usb.c: registered new driver usbdevfs
> Dec 3 13:19:08 kungfoo kernel: usb.c: registered new driver hub
> Dec 3 13:19:08 kungfoo kernel: Yenta IRQ list 0638, PCI irq11
> Dec 3 13:19:08 kungfoo kernel: Socket status: 30000006
> Dec 3 13:19:08 kungfoo kernel: Yenta IRQ list 0638, PCI irq11
> Dec 3 13:19:08 kungfoo kernel: Socket status: 30000410
> Dec 3 13:19:08 kungfoo kernel: Initializing USB Mass Storage driver...
> Dec 3 13:19:08 kungfoo kernel: usb.c: registered new driver usb-storage
> Dec 3 13:19:08 kungfoo kernel: USB Mass Storage support registered.
> Dec 3 13:19:08 kungfoo kernel: NET4: Linux TCP/IP 1.0 for NET4.0
> Dec 3 13:19:08 kungfoo kernel: IP Protocols: ICMP, UDP, TCP, IGMP
> Dec 3 13:19:08 kungfoo kernel: IP: routing cache hash table of 512 buckets,
> 4Kbytes
> Dec 3 13:19:08 kungfoo kernel: TCP: Hash tables configured (established
> 8192 bind 8192)
> Dec 3 13:19:08 kungfoo kernel: NET4: Unix domain sockets 1.0/SMP for Linux
> NET4.0.
> Dec 3 13:19:08 kungfoo kernel: VFS: Mounted root (ext2 filesystem)
> readonly. Dec 3 13:19:08 kungfoo kernel: Freeing unused kernel memory: 220k
> freed Dec 3 13:19:08 kungfoo kernel: PCI: Guessed IRQ 11 for device 00:14.0
> Dec 3 13:19:08 kungfoo kernel: usb-ohci.c: USB OHCI at membase 0xc8022000,
> IRQ 11
> Dec 3 13:19:08 kungfoo kernel: usb-ohci.c: usb-00:14.0, Acer Laboratories
> Inc. [ALi] M5237 USB
> Dec 3 13:19:08 kungfoo kernel: usb.c: new USB bus registered, assigned bus
> number 1
> Dec 3 13:19:08 kungfoo kernel: hub.c: USB hub found
> Dec 3 13:19:08 kungfoo kernel: hub.c: 3 ports detected
> Dec 3 13:19:08 kungfoo kernel: usb-uhci.c: $Revision: 1.268 $ time 22:43:44
> Nov 30 2001
> Dec 3 13:19:08 kungfoo kernel: usb-uhci.c: High bandwidth mode enabled
> Dec 3 13:19:08 kungfoo kernel: usb-uhci.c: v1.268:USB Universal Host
> Controller Interface driver
> Dec 3 13:19:08 kungfoo kernel: Adding Swap: 192740k swap-space (priority
> -1) Dec 3 13:19:08 kungfoo kernel: usb-uhci.c: $Revision: 1.268 $ time
> 22:43:44 Nov 30 2001
> Dec 3 13:19:08 kungfoo kernel: usb-uhci.c: High bandwidth mode enabled
> Dec 3 13:19:08 kungfoo kernel: usb-uhci.c: v1.268:USB Universal Host
> Controller Interface driver
> Dec 3 13:19:09 kungfoo kernel: cs: IO port probe 0x0c00-0x0cff: clean.
> Dec 3 13:19:09 kungfoo kernel: cs: IO port probe 0x0800-0x08ff: clean.
> Dec 3 13:19:09 kungfoo kernel: cs: IO port probe 0x0100-0x04ff: excluding
> 0x378-0x37f 0x408-0x40f 0x480-0x48f 0x4d0-0x4d7
> Dec 3 13:19:09 kungfoo kernel: cs: IO port probe 0x0a00-0x0aff: clean.
> Dec 3 13:19:09 kungfoo kernel: cs: memory probe 0xa0000000-0xa0ffffff:
> clean.
> Dec 3 13:28:55 kungfoo kernel: hub.c: USB new device connect on bus1/2,
> assigned device number 2
> Dec 3 13:28:56 kungfoo kernel: usb.c: USB device 2 (vend/prod 0x6b9/0x4061)
> is not claimed by any active driver.
> Dec 3 13:28:56 kungfoo /etc/hotplug/usb.agent: Modprobe and setup
> speedtouch for USB product 6b9/4061/0
> Dec 3 13:28:56 kungfoo /etc/hotplug/usb.agent: Module setup speedtouch for
> USB product 6b9/4061/0
> Dec 3 13:28:56 kungfoo kernel: usb.c: registered new driver Alcatel
> SpeedTouch USB
> Dec 3 13:28:56 kungfoo kernel: usb_control/bulk_msg: timeout
> Dec 3 13:28:56 kungfoo kernel: usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x85
> len 512 ret -110
> Dec 3 13:29:30 kungfoo kernel: CSLIP: code copyright 1989 Regents of the
> University of California
> Dec 3 13:29:30 kungfoo kernel: PPP generic driver version 2.4.1
> ---ENDOF /VAR/LOG/MESSAGES---
Reply to:
References:
- Alcatel SpeedTouch USB Modem Setup...
  - From: "Ben Hill" <ben@javacoder.net>
Prev by Date: Re: Alcatel SpeedTouch USB Modem Setup...
Next by Date: Re: Alcatel SpeedTouch USB Modem Setup...
Previous by thread: Re: Alcatel SpeedTouch USB Modem Setup...
Next by thread: Re: Alcatel SpeedTouch USB Modem Setup...
Index(es):
- Date
- Thread