routing question
i think, as time progresses, it is becoming increasingly obvious
that i don't /really/ know what i'm doing. i'm hoping there's an easy
fix, but i'm prepared for the long haul if necessary.
i have the following set up:
dsl modem - 192.168.1.254 (to hub)
machine a - 192.168.1.10 (to hub)
- 192.168.2.1 (wireless)
machine b - 192.168.2.2 (wireless)
machine c - 192.168.2.6 (wireless)
machine d - 192.168.2.7 (wireless)
machine e - 192.168.1.99 (to hub)
(to hub) indicates an actual ethernet cable running from the NIC to the
hub, which is a simple 5-port Linksys workgroup hub. the wireless
machines gateway through machine a (192.168.2.1) which, through IP
chains, hands off to 192.168.1.10. this works quite nicely.
however, machine e (192.168.1.99) cannot ping or otherwise see machine a
(192.168.1.10). it can gateway through the router (192.168.1.254) but
that's it. what do i need to do in order to allow machine e to see
machine a?
if i haven't provided enough info, just let me know. thanks!
--
____) ,_) ,_)
(-(__ |_ _ _ |/
____) | |(_)(_ |\
( \_,
_______________________________________________
| http://www.exitwound.org : hard to find |
_______________________________________________
| One of the worst of my many faults is that |
| I'm too critical of myself. |
_______________________________________________
-------------BEGIN GEEK CODE BLOCK-------------
| Version: 3.1 |
| GJ/IT d- s: a C+++>$ UL++++ P+++ L+++ E--- W++|
| N+@ o K- w O- M- V PS+ PE Y+ PGP++ t+@ 5@ X++ |
| R tv+@ b+ DI++++ D+ G++ e++++ h---- r+++ y+++ |
--------------END GEEK CODE BLOCK--------------
Reply to: