Re: hard drive problems... misconfiguration?
I am getting the same kind of errors shown below from your email (see mail
with subject "deselect and hda: irq timeout" 10-9 ... 10-10).
I have a brand-new Western Digital WB100EB. I downloaded a diagnostic
program from www.wdc.com. It detected and repaired errors. Now I am
writing zeros to the drive and that is taking a long time. When I'm done, I
will repartition and try loading again.
I'll report findings shortly.
Mike
hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hda: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=524418,
sector=524355
ide0: reset: success
hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hda: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=524418,
sector=524355
hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hda: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=524418,
sector=524355
hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hda: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=524418,
sector=524355
hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hda: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=524418,
sector=524355
ide0: reset: success
hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hda: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=524418,
sector=524355
end_request: I/O error, dev 03:01 (hda), sector 524355
EXT2-fs error (device ide0(3,1)): ext2_write_inode: unable to read inode
block - inode=28353, block=65544
--
To send me private (non-world-readable) mail, GPG encrypt it.
1024D/60715698: 5F2E 8EC2 E0A4 5D25 0569 F281 4A6C D76D 6071 5698
----- Original Message -----
From: "Hugo van der Merwe" <hugovdm@mail.com>
To: <debian-user@lists.debian.org>
Sent: Friday, August 10, 2001 10:09 AM
Subject: hard drive problems... misconfiguration?
Reply to: