Re: XFree86-4.1.0-2 broke X on my laptop
I get this whenever I have xinerama enabled which it looks like you
don't. Same int 11 internal server error. Just downgrade by apt-get
xfree86-common/testing etc for each xfree package (xserver-xfree86
xserver-common and the fonts if they complain)on your system. That
should downgrade it to something tolerable.
--mike
On 07 Aug 2001 15:32:54 -0500, Oleksandr Moskalenko wrote:
> Hello,
>
> I hope someone will have a clue because I have exhausted my resources.
> I've been running XFree86 4.0.x happily on my Toshiba Protege 660CDT.
> However, since last week's upgrade to 4.1.0 I can't use X anymore. It
> just segfaults in the middle of what appears to be a normal load. This
> is the log file. Please help me figure it out. I haven't changed
> anything in my XF86Config-4. Below are the console log and
> /var/log/XFree86.0.log. Attached is my XF86Config-4
>
> Console log I get while startx is running
> ============================
> XFree86 Version 4.1.0 / X Window System
> (protocol Version 11, revision 0, vendor release 6510)
> Release Date: 2 June 2001
> If the server is older than 6-12 months, or if your card is
> newer than the above date, look for a newer version before
> reporting problems. (See http://www.XFree86.Org/FAQ)
> Build Operating System: Linux 2.4.7 i686 [ELF]
> Module Loader present
> (==) Log file: "/var/log/XFree86.1.log", Time: Tue Aug 7 15:30:07 2001
> (==) Using config file: "/etc/X11/XF86Config-4"
> Markers: (--) probed, (**) from config file, (==) default setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) ServerLayout "Default Layout"
> (**) |-->Screen "Default Screen" (0)
> (**) | |-->Monitor "Generic Monitor"
> (**) | |-->Device "Generic Video Card"
> (**) |-->Input Device "Generic Keyboard"
> (**) XKB: rules: "xfree86"
> (**) XKB: model: "pc101"
> (**) XKB: layout: "us"
> (**) |-->Input Device "Configured Mouse"
> (**) |-->Input Device "Generic Mouse"
> (**) FontPath set to "unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/cyrillic,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi"
> (==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
> (==) ModulePath set to "/usr/X11R6/lib/modules"
> (--) using VT number 7
>
> (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
> (II) Module bitmap: vendor="The XFree86 Project"
> compiled for 4.1.0, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/libpcidata.a
> (II) Module pcidata: vendor="The XFree86 Project"
> compiled for 4.1.0, module version = 0.1.0
> (II) Loading /usr/X11R6/lib/modules/libscanpci.a
> (II) Module scanpci: vendor="The XFree86 Project"
> compiled for 4.1.0, module version = 0.1.0
> (II) Unloading /usr/X11R6/lib/modules/libscanpci.a
> (--) PCI:*(0:4:0) C&T 65554 rev 194, Mem @ 0xfe000000/24
> (II) Loading /usr/X11R6/lib/modules/libddc.a
> (II) Module ddc: vendor="The XFree86 Project"
> compiled for 4.1.0, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
> (II) Module dbe: vendor="The XFree86 Project"
> compiled for 4.1.0, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
> (II) Module extmod: vendor="The XFree86 Project"
> compiled for 4.1.0, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/extensions/libpex5.a
> (II) Module pex5: vendor="The XFree86 Project"
> compiled for 4.1.0, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
> (II) Module record: vendor="The XFree86 Project"
> compiled for 4.1.0, module version = 1.13.0
> (II) Loading /usr/X11R6/lib/modules/extensions/libxie.a
> (II) Module xie: vendor="The XFree86 Project"
> compiled for 4.1.0, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
> (II) Module freetype: vendor="The XFree86 Project"
> compiled for 4.1.0, module version = 1.1.9
> (II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
> (II) Module speedo: vendor="The XFree86 Project"
> compiled for 4.1.0, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
> (II) Module type1: vendor="The XFree86 Project"
> compiled for 4.1.0, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/libvbe.a
> (II) Module vbe: vendor="The XFree86 Project"
> compiled for 4.1.0, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/linux/libint10.a
> (II) Module int10: vendor="The XFree86 Project"
> compiled for 4.1.0, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/drivers/chips_drv.o
> (II) Module chips: vendor="The XFree86 Project"
> compiled for 4.1.0, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
> (II) Module mouse: vendor="The XFree86 Project"
> compiled for 4.1.0, module version = 1.0.0
> (II) CHIPS: Driver for Chips and Technologies chipsets: ct65520, ct65525,
> ct65530, ct65535, ct65540, ct65545, ct65546, ct65548, ct65550,
> ct65554, ct65555, ct68554, ct69000, ct69030, ct64200, ct64300
> (--) Assigning device section with no busID to primary device
> (--) Chipset ct65554 found
> (II) Loading /usr/X11R6/lib/modules/libvgahw.a
> (II) Module vgahw: vendor="The XFree86 Project"
> compiled for 4.1.0, module version = 0.1.0
> (II) CHIPS(0): initializing int10
> (II) CHIPS(0): Primary V_BIOS segment is: 0xe400
> (II) CHIPS(0): VESA BIOS detected
> (**) CHIPS(0): Depth 16, (--) framebuffer bpp 16
> (==) CHIPS(0): RGB weight 565
> (==) CHIPS(0): Default visual is TrueColor
> (==) CHIPS(0): Using gamma correction (1.0, 1.0, 1.0)
> (==) CHIPS(0): Using HW cursor
> (**) CHIPS(0): Enabling linear addressing
> (--) CHIPS(0): base address is set at 0xFE000000.
> (**) CHIPS(0): Using MMIO
> (--) CHIPS(0): VideoRAM: 2048 kByte
> (--) CHIPS(0): TFT probed
> (--) CHIPS(0): LCD
> (--) CHIPS(0): Display Size: x=800; y=600
> (--) CHIPS(0): PCI Bus
> (--) CHIPS(0): Internal DAC disabled
> (--) CHIPS(0): Using programmable clocks
> (--) CHIPS(0): Dot clock 0: 25.172 MHz
> (--) CHIPS(0): Dot clock 1: 28.325 MHz CRTclk
> (--) CHIPS(0): Dot clock 2: 40.090 MHz FPclk
> (--) CHIPS(0): Probed memory clock of 40.090 MHz
> (==) CHIPS(0): Min pixel clock is 11.000 MHz
> (--) CHIPS(0): Max pixel clock is 56.125 MHz
> (II) CHIPS(0): VESA VBE DDC supported
> (II) CHIPS(0): Manufacturer: TOS Model: 5081 Serial#: 0
> (II) CHIPS(0): Year: 1995 Week: 20
> (II) CHIPS(0): EDID Version: 1.0
> (II) CHIPS(0): Digital Display Input
> (II) CHIPS(0): Max H-Image Size [cm]: horiz.: 23 vert.: 17
> (II) CHIPS(0): Gamma: 1.00
> (II) CHIPS(0): No DPMS capabilities specified; RGB/Color Display
> (II) CHIPS(0): redX: 0.000 redY: 0.000 greenX: 0.000 greenY: 0.000
> (II) CHIPS(0): blueX: 0.000 blueY: 0.000 whiteX: 0.000 whiteY: 0.000
> (II) CHIPS(0): Supported VESA Video Modes:
> (II) CHIPS(0): 640x480@60Hz
> (II) CHIPS(0): 800x600@60Hz
> (II) CHIPS(0): 1024x768@60Hz
> (II) CHIPS(0): Manufacturer's mask: 0
> (II) CHIPS(0): Generic Monitor: Using hsync range of 29.00-61.00 kHz
> (II) CHIPS(0): Generic Monitor: Using vrefresh range of 40.00-85.00 Hz
> (II) CHIPS(0): Clock range: 11.00 to 56.12 MHz
> (II) CHIPS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
> (II) CHIPS(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
> (II) CHIPS(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
> (II) CHIPS(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
> (II) CHIPS(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
> (II) CHIPS(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
> (II) CHIPS(0): Not using default mode "1152x864" (bad mode clock/interlace/doublescan)
> (II) CHIPS(0): Not using default mode "1280x960" (insufficient memory for mode)
> (II) CHIPS(0): Not using default mode "1280x960" (insufficient memory for mode)
> (II) CHIPS(0): Not using default mode "1280x1024" (insufficient memory for mode)
> (II) CHIPS(0): Not using default mode "1280x1024" (insufficient memory for mode)
> (II) CHIPS(0): Not using default mode "1280x1024" (insufficient memory for mode)
> (II) CHIPS(0): Not using default mode "1600x1200" (insufficient memory for mode)
> (II) CHIPS(0): Not using default mode "1600x1200" (insufficient memory for mode)
> (II) CHIPS(0): Not using default mode "1600x1200" (insufficient memory for mode)
> (II) CHIPS(0): Not using default mode "1600x1200" (insufficient memory for mode)
> (II) CHIPS(0): Not using default mode "1600x1200" (insufficient memory for mode)
> (II) CHIPS(0): Not using default mode "1792x1344" (insufficient memory for mode)
> (II) CHIPS(0): Not using default mode "1792x1344" (insufficient memory for mode)
> (II) CHIPS(0): Not using default mode "1856x1392" (insufficient memory for mode)
> (II) CHIPS(0): Not using default mode "1856x1392" (insufficient memory for mode)
> (II) CHIPS(0): Not using default mode "1920x1440" (insufficient memory for mode)
> (II) CHIPS(0): Not using default mode "1920x1440" (insufficient memory for mode)
> (II) CHIPS(0): Not using default mode "1400x1050" (insufficient memory for mode)
> (II) CHIPS(0): Not using default mode "1400x1050" (insufficient memory for mode)
> (--) CHIPS(0): Virtual size is 800x600 (pitch 800)
> (**) CHIPS(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
> (**) CHIPS(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
> (--) CHIPS(0): Display dimensions: (23, 17) cm
> (--) CHIPS(0): DPI set to (88, 89)
> (II) Loading /usr/X11R6/lib/modules/libfb.a
> (II) Module fb: vendor="The XFree86 Project"
> compiled for 4.1.0, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/libxaa.a
> (II) Module xaa: vendor="The XFree86 Project"
> compiled for 4.1.0, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/libramdac.a
> (II) Module ramdac: vendor="The XFree86 Project"
> compiled for 4.1.0, module version = 0.1.0
>
> Fatal server error:
> Caught signal 11. Server aborting
>
>
> When reporting a problem related to a server crash, please send
> the full server output, not just the last messages.
> This can be found in the log file "/var/log/XFree86.1.log".
> Please report problems to submit@bugs.debian.org.
>
> XIO: fatal IO error 104 (Connection reset by peer) on X server ":1.0"
> after 0 requests (0 known processed) with 0 events remaining.
> =====================================================================
>
> My /var/log/XFree86.0.log:
> ============================
> XFree86 Version 4.1.0 / X Window System
> (protocol Version 11, revision 0, vendor release 6510)
> Release Date: 2 June 2001
> If the server is older than 6-12 months, or if your card is
> newer than the above date, look for a newer version before
> reporting problems. (See http://www.XFree86.Org/FAQ)
> Build Operating System: Linux 2.4.7 i686 [ELF]
> Module Loader present
> (==) Log file: "/var/log/XFree86.0.log", Time: Tue Aug 7 15:13:11 2001
> (==) Using config file: "/etc/X11/XF86Config-4"
> Markers: (--) probed, (**) from config file, (==) default setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) ServerLayout "Default Layout"
> (**) |-->Screen "Default Screen" (0)
> (**) | |-->Monitor "Generic Monitor"
> (**) | |-->Device "Generic Video Card"
> (**) |-->Input Device "Generic Keyboard"
> (**) Option "XkbRules" "xfree86"
> (**) XKB: rules: "xfree86"
> (**) Option "XkbModel" "pc101"
> (**) XKB: model: "pc101"
> (**) Option "XkbLayout" "us"
> (**) XKB: layout: "us"
> (==) Keyboard: CustomKeycode disabled
> (**) |-->Input Device "Configured Mouse"
> (**) |-->Input Device "Generic Mouse"
> (**) FontPath set to "unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/cyrillic,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi"
> (==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
> (==) ModulePath set to "/usr/X11R6/lib/modules"
> (--) using VT number 7
>
> (II) Open APM successful
> (II) Module ABI versions:
> XFree86 ANSI C Emulation: 0.1
> XFree86 Video Driver: 0.4
> XFree86 XInput driver : 0.2
> XFree86 Server Extension : 0.1
> XFree86 Font Renderer : 0.2
> (II) Loader running on linux
> (II) LoadModule: "bitmap"
> (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
> (II) Module bitmap: vendor="The XFree86 Project"
> compiled for 4.1.0, module version = 1.0.0
> Module class: XFree86 Font Renderer
> ABI class: XFree86 Font Renderer, version 0.2
> (II) Loading font Bitmap
> (II) LoadModule: "pcidata"
> (II) Loading /usr/X11R6/lib/modules/libpcidata.a
> (II) Module pcidata: vendor="The XFree86 Project"
> compiled for 4.1.0, module version = 0.1.0
> ABI class: XFree86 Video Driver, version 0.4
> (II) PCI: Probing config type using method 1
> (II) PCI: Config type is 1
> (II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
> (II) PCI: PCI scan (all values are in hex)
> (II) PCI: 00:00:0: chip 1179,0601 card 0000,0000 rev 11 class 06,00,00 hdr 00
> (II) PCI: 00:04:0: chip 102c,00e4 card 0000,0000 rev c2 class 03,00,00 hdr 00
> (II) PCI: End of PCI scan
> (II) LoadModule: "scanpci"
> (II) Loading /usr/X11R6/lib/modules/libscanpci.a
> (II) Module scanpci: vendor="The XFree86 Project"
> compiled for 4.1.0, module version = 0.1.0
> ABI class: XFree86 Video Driver, version 0.4
> (II) UnloadModule: "scanpci"
> (II) Unloading /usr/X11R6/lib/modules/libscanpci.a
> (II) Host-to-PCI bridge:
> (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
> (II) Bus 0 I/O range:
> [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
> (II) Bus 0 non-prefetchable memory range:
> [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
> (II) Bus 0 prefetchable memory range:
> [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
> (--) PCI:*(0:4:0) C&T 65554 rev 194, Mem @ 0xfe000000/24
> (II) Addressable bus resource ranges are
> [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
> [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
> (II) OS-reported resource ranges:
> [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> (II) Active PCI resource ranges:
> [0] -1 0 0xfe000000 - 0xfeffffff (0x1000000) MX[B](B)
> (II) Active PCI resource ranges after removing overlaps:
> [0] -1 0 0xfe000000 - 0xfeffffff (0x1000000) MX[B](B)
> (II) OS-reported resource ranges after removing overlaps with PCI:
> [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> (II) All system resource ranges:
> [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [5] -1 0 0xfe000000 - 0xfeffffff (0x1000000) MX[B](B)
> [6] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [7] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> (II) LoadModule: "ddc"
> (II) Loading /usr/X11R6/lib/modules/libddc.a
> (II) Module ddc: vendor="The XFree86 Project"
> compiled for 4.1.0, module version = 1.0.0
> ABI class: XFree86 Video Driver, version 0.4
> (II) LoadModule: "dbe"
> (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
> (II) Module dbe: vendor="The XFree86 Project"
> compiled for 4.1.0, module version = 1.0.0
> Module class: XFree86 Server Extension
> ABI class: XFree86 Server Extension, version 0.1
> (II) Loading extension DOUBLE-BUFFER
> (II) LoadModule: "extmod"
> (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
> (II) Module extmod: vendor="The XFree86 Project"
> compiled for 4.1.0, module version = 1.0.0
> Module class: XFree86 Server Extension
> ABI class: XFree86 Server Extension, version 0.1
> (II) Loading extension SHAPE
> (II) Loading extension MIT-SUNDRY-NONSTANDARD
> (II) Loading extension BIG-REQUESTS
> (II) Loading extension SYNC
> (II) Loading extension MIT-SCREEN-SAVER
> (II) Loading extension XC-MISC
> (II) Loading extension XFree86-VidModeExtension
> (II) Loading extension XFree86-Misc
> (II) Loading extension XFree86-DGA
> (II) Loading extension DPMS
> (II) Loading extension FontCache
> (II) Loading extension TOG-CUP
> (II) Loading extension Extended-Visual-Information
> (II) Loading extension XVideo
> (II) Loading extension XVideo-MotionCompensation
> (II) LoadModule: "pex5"
> (II) Loading /usr/X11R6/lib/modules/extensions/libpex5.a
> (II) Module pex5: vendor="The XFree86 Project"
> compiled for 4.1.0, module version = 1.0.0
> Module class: XFree86 Server Extension
> ABI class: XFree86 Server Extension, version 0.1
> (II) Loading extension X3D-PEX
> (II) LoadModule: "record"
> (II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
> (II) Module record: vendor="The XFree86 Project"
> compiled for 4.1.0, module version = 1.13.0
> Module class: XFree86 Server Extension
> ABI class: XFree86 Server Extension, version 0.1
> (II) Loading extension RECORD
> (II) LoadModule: "xie"
> (II) Loading /usr/X11R6/lib/modules/extensions/libxie.a
> (II) Module xie: vendor="The XFree86 Project"
> compiled for 4.1.0, module version = 1.0.0
> Module class: XFree86 Server Extension
> ABI class: XFree86 Server Extension, version 0.1
> (II) Loading extension XIE
> (II) LoadModule: "bitmap"
> (II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.a
> (II) Loading font Bitmap
> (II) LoadModule: "freetype"
> (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
> (II) Module freetype: vendor="The XFree86 Project"
> compiled for 4.1.0, module version = 1.1.9
> Module class: XFree86 Font Renderer
> ABI class: XFree86 Font Renderer, version 0.2
> (II) Loading font FreeType
> (II) LoadModule: "speedo"
> (II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
> (II) Module speedo: vendor="The XFree86 Project"
> compiled for 4.1.0, module version = 1.0.0
> Module class: XFree86 Font Renderer
> ABI class: XFree86 Font Renderer, version 0.2
> (II) Loading font Speedo
> (II) LoadModule: "type1"
> (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
> (II) Module type1: vendor="The XFree86 Project"
> compiled for 4.1.0, module version = 1.0.0
> Module class: XFree86 Font Renderer
> ABI class: XFree86 Font Renderer, version 0.2
> (II) Loading font Type1
> (II) Loading font CID
> (II) LoadModule: "vbe"
> (II) Loading /usr/X11R6/lib/modules/libvbe.a
> (II) Module vbe: vendor="The XFree86 Project"
> compiled for 4.1.0, module version = 1.0.0
> ABI class: XFree86 Video Driver, version 0.4
> (II) LoadModule: "int10"
> (II) Loading /usr/X11R6/lib/modules/linux/libint10.a
> (II) Module int10: vendor="The XFree86 Project"
> compiled for 4.1.0, module version = 1.0.0
> ABI class: XFree86 Video Driver, version 0.4
> (II) LoadModule: "chips"
> (II) Loading /usr/X11R6/lib/modules/drivers/chips_drv.o
> (II) Module chips: vendor="The XFree86 Project"
> compiled for 4.1.0, module version = 1.0.0
> Module class: XFree86 Video Driver
> ABI class: XFree86 Video Driver, version 0.4
> (II) LoadModule: "mouse"
> (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
> (II) Module mouse: vendor="The XFree86 Project"
> compiled for 4.1.0, module version = 1.0.0
> Module class: XFree86 XInput Driver
> ABI class: XFree86 XInput driver, version 0.2
> (II) CHIPS: Driver for Chips and Technologies chipsets: ct65520, ct65525,
> ct65530, ct65535, ct65540, ct65545, ct65546, ct65548, ct65550,
> ct65554, ct65555, ct68554, ct69000, ct69030, ct64200, ct64300
> (II) Primary Device is: PCI 00:04:0
> (--) Assigning device section with no busID to primary device
> (--) Chipset ct65554 found
> (II) resource ranges after xf86ClaimFixedResources() call:
> [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [5] -1 0 0xfe000000 - 0xfeffffff (0x1000000) MX[B](B)
> [6] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [7] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> (II) resource ranges after probing:
> [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [5] -1 0 0xfe000000 - 0xfeffffff (0x1000000) MX[B](B)
> [6] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
> [7] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
> [8] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
> [9] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [10] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> [11] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
> [12] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
> (II) Setting vga for screen 0.
> (II) Loading sub module "vgahw"
> (II) LoadModule: "vgahw"
> (II) Loading /usr/X11R6/lib/modules/libvgahw.a
> (II) Module vgahw: vendor="The XFree86 Project"
> compiled for 4.1.0, module version = 0.1.0
> ABI class: XFree86 Video Driver, version 0.4
> (II) Loading sub module "vbe"
> (II) LoadModule: "vbe"
> (II) Reloading /usr/X11R6/lib/modules/libvbe.a
> (II) Loading sub module "int10"
> (II) LoadModule: "int10"
> (II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
> (II) CHIPS(0): initializing int10
> (II) CHIPS(0): Primary V_BIOS segment is: 0xe400
> (II) CHIPS(0): VESA BIOS detected
> (II) CHIPS(0): VESA VBE Version 2.0
> (II) CHIPS(0): VESA VBE Total Mem: 2048 kB
> (II) CHIPS(0): VESA VBE OEM: CHIPS 65554 Super VGA
> (II) CHIPS(0): VESA VBE OEM Software Rev: 1.0
> (II) CHIPS(0): VESA VBE OEM Vendor: Chips & Technologies, Inc.
> (II) CHIPS(0): VESA VBE OEM Product: 65554 Display Controller
> (II) CHIPS(0): VESA VBE OEM Product Rev: 2
> (**) CHIPS(0): Depth 16, (--) framebuffer bpp 16
> (==) CHIPS(0): RGB weight 565
> (==) CHIPS(0): Default visual is TrueColor
> (==) CHIPS(0): Using gamma correction (1.0, 1.0, 1.0)
> (==) CHIPS(0): Using HW cursor
> (**) CHIPS(0): Enabling linear addressing
> (--) CHIPS(0): base address is set at 0xFE000000.
> (**) CHIPS(0): Using MMIO
> (--) CHIPS(0): VideoRAM: 2048 kByte
> (--) CHIPS(0): TFT probed
> (--) CHIPS(0): LCD
> (--) CHIPS(0): Display Size: x=800; y=600
> (--) CHIPS(0): PCI Bus
> (--) CHIPS(0): Internal DAC disabled
> (--) CHIPS(0): Using programmable clocks
> (--) CHIPS(0): Dot clock 0: 25.172 MHz
> (--) CHIPS(0): Dot clock 1: 28.325 MHz CRTclk
> (--) CHIPS(0): Dot clock 2: 40.090 MHz FPclk
> (--) CHIPS(0): Probed memory clock of 40.090 MHz
> (==) CHIPS(0): Min pixel clock is 11.000 MHz
> (--) CHIPS(0): Max pixel clock is 56.125 MHz
> (II) Loading sub module "ddc"
> (II) LoadModule: "ddc"
> (II) Reloading /usr/X11R6/lib/modules/libddc.a
> (II) Loading sub module "ddc"
> (II) LoadModule: "ddc"
> (II) Reloading /usr/X11R6/lib/modules/libddc.a
> (II) CHIPS(0): VESA VBE DDC supported
> (II) CHIPS(0): VESA VBE DDC Level 2
> (II) CHIPS(0): VESA VBE DDC transfer in appr. 1 sec.
> (II) CHIPS(0): VESA VBE DDC read successfully
> (II) CHIPS(0): Manufacturer: TOS Model: 5081 Serial#: 0
> (II) CHIPS(0): Year: 1995 Week: 20
> (II) CHIPS(0): EDID Version: 1.0
> (II) CHIPS(0): Digital Display Input
> (II) CHIPS(0): Max H-Image Size [cm]: horiz.: 23 vert.: 17
> (II) CHIPS(0): Gamma: 1.00
> (II) CHIPS(0): No DPMS capabilities specified; RGB/Color Display
> (II) CHIPS(0): redX: 0.000 redY: 0.000 greenX: 0.000 greenY: 0.000
> (II) CHIPS(0): blueX: 0.000 blueY: 0.000 whiteX: 0.000 whiteY: 0.000
> (II) CHIPS(0): Supported VESA Video Modes:
> (II) CHIPS(0): 640x480@60Hz
> (II) CHIPS(0): 800x600@60Hz
> (II) CHIPS(0): 1024x768@60Hz
> (II) CHIPS(0): Manufacturer's mask: 0
> (II) CHIPS(0): Generic Monitor: Using hsync range of 29.00-61.00 kHz
> (II) CHIPS(0): Generic Monitor: Using vrefresh range of 40.00-85.00 Hz
> (II) CHIPS(0): Clock range: 11.00 to 56.12 MHz
> (II) CHIPS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
> (II) CHIPS(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
> (II) CHIPS(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
> (II) CHIPS(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
> (II) CHIPS(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
> (II) CHIPS(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
> (II) CHIPS(0): Not using default mode "1152x864" (bad mode clock/interlace/doublescan)
> (II) CHIPS(0): Not using default mode "1280x960" (insufficient memory for mode)
> (II) CHIPS(0): Not using default mode "1280x960" (insufficient memory for mode)
> (II) CHIPS(0): Not using default mode "1280x1024" (insufficient memory for mode)
> (II) CHIPS(0): Not using default mode "1280x1024" (insufficient memory for mode)
> (II) CHIPS(0): Not using default mode "1280x1024" (insufficient memory for mode)
> (II) CHIPS(0): Not using default mode "1600x1200" (insufficient memory for mode)
> (II) CHIPS(0): Not using default mode "1600x1200" (insufficient memory for mode)
> (II) CHIPS(0): Not using default mode "1600x1200" (insufficient memory for mode)
> (II) CHIPS(0): Not using default mode "1600x1200" (insufficient memory for mode)
> (II) CHIPS(0): Not using default mode "1600x1200" (insufficient memory for mode)
> (II) CHIPS(0): Not using default mode "1792x1344" (insufficient memory for mode)
> (II) CHIPS(0): Not using default mode "1792x1344" (insufficient memory for mode)
> (II) CHIPS(0): Not using default mode "1856x1392" (insufficient memory for mode)
> (II) CHIPS(0): Not using default mode "1856x1392" (insufficient memory for mode)
> (II) CHIPS(0): Not using default mode "1920x1440" (insufficient memory for mode)
> (II) CHIPS(0): Not using default mode "1920x1440" (insufficient memory for mode)
> (II) CHIPS(0): Not using default mode "1400x1050" (insufficient memory for mode)
> (II) CHIPS(0): Not using default mode "1400x1050" (insufficient memory for mode)
> (--) CHIPS(0): Virtual size is 800x600 (pitch 800)
> (**) CHIPS(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
> (II) CHIPS(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
> (**) CHIPS(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
> (II) CHIPS(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync
> (++) CHIPS(0): DPI set to (100, 100)
> (II) Loading sub module "fb"
> (II) LoadModule: "fb"
> (II) Loading /usr/X11R6/lib/modules/libfb.a
> (II) Module fb: vendor="The XFree86 Project"
> compiled for 4.1.0, module version = 1.0.0
> ABI class: XFree86 ANSI C Emulation, version 0.1
> (II) Loading sub module "xaa"
> (II) LoadModule: "xaa"
> (II) Loading /usr/X11R6/lib/modules/libxaa.a
> (II) Module xaa: vendor="The XFree86 Project"
> compiled for 4.1.0, module version = 1.0.0
> ABI class: XFree86 Video Driver, version 0.4
> (II) Loading sub module "ramdac"
> (II) LoadModule: "ramdac"
> (II) Loading /usr/X11R6/lib/modules/libramdac.a
> (II) Module ramdac: vendor="The XFree86 Project"
> compiled for 4.1.0, module version = 0.1.0
> ABI class: XFree86 Video Driver, version 0.4
> (II) do I need RAC? No, I don't.
> (II) resource ranges after preInit:
> [0] 0 0 0xfe000000 - 0xfeffffff (0x1000000) MS[B]
> [1] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [6] -1 0 0xfe000000 - 0xfeffffff (0x1000000) MX[B](B)
> [7] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
> [8] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
> [9] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
> [10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [11] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> [12] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
> [13] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
>
> Fatal server error:
> Caught signal 11. Server aborting
>
>
> When reporting a problem related to a server crash, please send
> the full server output, not just the last messages.
> This can be found in the log file "/var/log/XFree86.0.log".
> Please report problems to submit@bugs.debian.org.
>
>
Reply to: