[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Debian install issues...



-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

One more time, just with out the HTML Email :) Sorry, im new to the
mailing list.

Here's the problem I am having.  This occurs on all the flavors of
the latest stable release root disks.  Basically when the root disk
loads up into the install menus, specifically the first release notes
window and the driver setup window, if I scroll down with the
keyboard the system will show a black line in the middle of the
window and then *hang* the system up to dry.  I booted off loppies, I
booted off a FAT32 disk with loadlin, and even ran memtest82 to see
if I had memory probs.  I bumped my clock back down to spec(celeron
300a) none of which seems to be working.  I have installed debian in
the past so I am assuming its an issue with the latest release.


Now for the system specs;
ABIT BM6
Celeron 300a OC'ed to 450MHz
128Megs PC100 SDRAM
UDMA66 IDE Controller Card
ATI AGP Rage Fury 32Meg
ATI All in Wonder TV PCI
2 CDRoms
1 HP Travan Tape Drive
SB AWE64 PCI


And now for dmesg;
Linux version 2.2.19pre17-ide (root@arnor) (gcc version 2.7.2.3) #1
Tue Mar 13 23:36:29 EST 2001
BIOS-provided physical RAM map:
 BIOS-e820: 0009e000 @ 00000000 (usable)
 BIOS-e820: 07f00000 @ 00100000 (usable)
Detected 463921 kHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 924.05 BogoMIPS
Memory: 126576k/131072k available (1036k kernel code, 416k reserved,
1532k data, 72k init)
Dentry hash table entries: 16384 (order 5, 128k)
Buffer cache hash table entries: 131072 (order 7, 512k)
Page cache hash table entries: 32768 (order 5, 128k)
VFS: Diskquotas version dquot_6.4.0 initialized
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
128K L2 cache (4 way)
CPU: L2 Cache: 128K
CPU: Intel Celeron (Mendocino) stepping 05
Checking 386/387 coupling... OK, FPU using exception 16 error
reporting.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au)
PCI: PCI BIOS revision 2.10 entry at 0xfb330
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 131072 bhash 65536)
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.09
RAM disk driver initialized:  16 RAM disks of 4096K size
loop: registered device at major 7
Uniform Multi-Platform E-IDE driver Revision: 6.30
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
PDC20262: IDE controller on PCI bus 00 dev 48
PDC20262: chipset revision 1
PDC20262: not 100% native mode: will probe irqs later
PDC20262: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI
Mode.
    ide2: BM-DMA at 0xe400-0xe407, BIOS settings: hde:DMA, hdf:DMA
    ide3: BM-DMA at 0xe408-0xe40f, BIOS settings: hdg:DMA, hdh:pio
hda: FUJITSU M1638TAU, ATA DISK drive
hdb: HP COLORADO 8GB, ATAPI TAPE drive
hdc: ATAPI 48X CDROM, ATAPI CDROM drive
hdd: OTI-975 SOCRATES ATAPI CD-R/RW, ATAPI CDROM drive
hde: WDC WD307AA, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide2 at 0xd400-0xd407,0xd802 on irq 9
hda: FUJITSU M1638TAU, 2452MB w/128kB Cache, CHS=622/128/63
hde: WDC WD307AA, 29333MB w/2048kB Cache, CHS=59598/16/63, UDMA(66)
hdc: ATAPI 48X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.11
hdd: ATAPI 6X CD-ROM CD-R/RW drive, 1024kB Cache
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
Partition check:
 hda: hda1 hda2
 hde: [PTBL] [3739/255/63] hde1
RAMDISK: Compressed image found at block 0
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.13)
apm: disabled on user request.
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 72k freed
kmod: runaway modprobe loop assumed and stopped
kmod: runaway modprobe loop assumed and stopped
NET4: Unix domain sockets 1.0 for Linux NET4.0.

-----BEGIN PGP SIGNATURE-----
Version: PGPfreeware 7.0.3 for non-commercial use <http://www.pgp.com>

iQA/AwUBO2SVL4P/qI2w+OWmEQIW/gCg/wtWfHUOMHCvoQQv2CILJi6TFKEAnjNT
4r0dEnVp2S2H621zQZKQQh8Z
=9TRK
-----END PGP SIGNATURE-----




Reply to: