[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: hda timeout waiting for DMA?



On Tue, 24 Apr 2001, Mike Fedyk wrote:
>
> Is it a western digital?  Really old?  Do you have an unsupported chipset?

Yes, it's a WD.  Probably 5 years old, max.  The chipset (which escapes me
at the moment) is support, to the best of my recollection.

> Maybe we can get you using some form of dma with this drive.
>
> Post the output of hdparm -i /dev/hda

/dev/hda:

 Model=WDC AC38400B, FwRev=32.02S32, SerialNo=WD-WM6210073506
 Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs FmtGapReq
}
 RawCHS=16383/16/63, TrkSize=57600, SectSize=600, ECCbytes=22
 BuffType=DualPortCache, BuffSize=512kB, MaxMultSect=16, MultSect=off
 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=16514064
 IORDY=on/off, tPIO={min:160,w/IORDY:120}, tDMA={min:120,rec:120}
 PIO modes: pio0 pio1 pio2 pio3 pio4
 DMA modes: mdma0 mdma1 *mdma2 udma0 udma1 udma2

> Post the output of lspci.

see the text attachment.


-- 
steve
*****
linux : http://exitwound.org
mozart: http://mozart.sourceforge.net
buck  : http://www.BuckOwensFan.com
*****
00:00.0 Host bridge: Intel Corporation 440FX - 82441FX PMC [Natoma] (rev 02)
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
	Latency: 24 set

00:07.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] (rev 01)
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0 set

00:07.1 IDE interface: Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II] (prog-if 80)
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 16 set
	Region 4: I/O ports at ff50

00:0b.0 Network controller: Unknown device 14b7:0001 (rev 02)
	Subsystem: Unknown device 14b7:0001
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at ffbbfc00 (32-bit, non-prefetchable)
	Region 1: I/O ports at fc80
	Region 3: I/O ports at ff60

00:0f.0 VGA compatible controller: S3 Inc. ViRGE/VX (rev 02)
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 4 min, 255 max, 24 set
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at f8000000 (32-bit, non-prefetchable)

00:11.0 Multimedia audio controller: Creative Labs SB Live! (rev 07)
	Subsystem: Unknown device 1102:8061
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 2 min, 20 max, 24 set
	Interrupt: pin A routed to IRQ 9
	Region 0: I/O ports at ff80
	Capabilities: [dc] Power Management version 1
		Flags: PMEClk- AuxPwr- DSI- D1+ D2+ PME-
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:11.1 Input device controller: Creative Labs SB Live! Daughterboard (rev 07)
	Subsystem: Unknown device 1102:0020
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 24 set
	Region 0: I/O ports at fff0
	Capabilities: [dc] Power Management version 1
		Flags: PMEClk- AuxPwr- DSI- D1+ D2+ PME-
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:13.0 Unknown mass storage controller: Promise Technology, Inc.: Unknown device 4d30 (rev 02)
	Subsystem: Unknown device 105a:4d33
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 24 set
	Interrupt: pin A routed to IRQ 10
	Region 0: I/O ports at ffe0
	Region 1: I/O ports at ffac
	Region 2: I/O ports at ffa0
	Region 3: I/O ports at ffa8
	Region 4: I/O ports at ff00
	Region 5: Memory at ffbc0000 (32-bit, non-prefetchable)
	Capabilities: [58] Power Management version 1
		Flags: PMEClk- AuxPwr- DSI- D1- D2- PME-
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-


Reply to: