Re: 320X240
OD> what is the graphics controller chip you are using ???
OD> ---------- i use intel i810
You need agpgart module if you want normal resolutions to work on
i810. It should be in latest versions of 2.2.x kernel (I use 2.2.18
and it does there) or 2.4.xx. Once you should load compiled agpgart
module before starting X. You can also compile DRI support module if
you wan fast 3d (but it is optional).
OD> which XF86 are you using ?? ( 3.3.x or 4.0.x ?? )
OD> ----------i use XF86 4.0.2
OD> use XFree_SVGA -probeonly to see what your resolution will be...
OD> tweek /etc/X11/XF86Config till its the usable resolution
OD> ---------------i dont know what can do now
OD> ---------------please , i need realy help for this problem
There is no 'XFree_SVGA' X server in XF86 4.0.2. There is single binary
for all cards 'XFree86'.
Try 'XFree86 -probeonly > logfile.txt 2>&1' and check logfile. If you
don't understand what's wrong in this log then post it.
--
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
| Ilya Martynov (http://martynov.org/) |
| GnuPG 1024D/323BDEE6 D7F7 561E 4C1D 8A15 8E80 E4AE BE1A 53EB 323B DEE6 |
| AGAVA Software Company (http://www.agava.com/) |
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Reply to:
- Follow-Ups:
- RE: 320X240
- From: "Oliver Drechsler" <eddoliv@edd.ericsson.se>
- References:
- RE: 320X240
- From: "Oliver Drechsler" <eddoliv@edd.ericsson.se>