Re: More leafnode woes

[Pat Colbeck <pcolbeck@bashq.org>]

Hi

As requested my leafnode config file. I also checked the permisions as you 
suggested and all directories from / var/spool/news downwards are owned by 
news.news.

Thanks 

Pat (who is more awake than he was last night due to the fact that is a bank 
holiday over here in the UK today :)

## This is the NNTP server leafnode fetches its news from.
## You need read and post access to it. Mandatory.
server = news.uk2.net

## Unread discussion threads will be deleted after this many days if
## you don't define special expire times. Mandatory.
expire = 20

##
## All the following parameters are optional
##

## I have free access to my news server. If you don't have, comment out
## the following two lines and change them accordingly.
# username = gulbrandsen
# password = secret

## Standard news servers run on port 119. If your newsserver doesn't, comment
## out the following line and change it accordingly.
# port = 8000

## This is another news server which stores some groups that are not
## available on the first one. You can define username, password and port
## for each server separately.
# supplement = sex.and.warez.com
# username = xenu
# password = secret

## This is a news server which does not understand the 
## "LIST NEWSGROUP news.group" command. For this reason, we don't try to
## download newsgroups descriptions when getting new newsgroups. This is
## achieved by putting "nodesc = 1" somewhere behind the server/supplement
## line.
# supplement = broken.upstream.server
# nodesc = 1

## Here we have another news server which has a very slow connection. For
## that reason, we wait a full minute before we give up trying to connect.
## The default is 10 seconds.
# supplement = really.slow.snail
# timeout = 60

## Non-standard expire times (glob(7) wildcard constructs possible)
# groupexpire comp.os.linux.* = 5 # groups too big to hold articles 20 days
# groupexpire any.local.newsgroup = 100 # very interesting, hold articles 
longer

## Never fetch more than this many articles from one group in one run.
## Be careful with this; setting it much below 1000 is probably a bad
## idea.
# maxfetch = 2000

## Fetch only a few articles when we subscribe a new newsgroup. The
## default is to fetch all articles.
# initialfetch = 100

## If you want to use leafnode like an offline newsreader (e.g. Forte
## Agent) you can download headers and bodies separately if you set
## delaybody to 1. In this case, fetch will only download the headers
## and only when you select an article, it will download the body.
## This can save a huge amount of bandwith if only few articles are really
## read from groups with lots of postings.
## This feature works not very well with Netscape, though (which is not
## a fault of Leafnode).
# delaybody = 0

## To avoid spam, you can select the maximum number of crosspostings
## that are allowed in incoming postings. Setting this below 5 is
## probably a bad idea. The default is unlimited crossposting.
# maxcrosspost = 5

## If you suffer from repeatedly receiving old postings (this happens
## sometimes when an upstream server goes into hiccup mode) you can
## refuse to receive them with the parameter "maxage" which tells the
## maximum allowed age of an article in days. The default maxage is 10
## days.
# maxage = 10

## maxlines will make fetch reject postings that are longer than a certain
## amount of lines.
# maxlines = 100

## minlines will make fetch reject postings that are shorter than a certain
## amount of lines.
# minlines = 2

## maxbytes will make fetch reject postings that are larger
# maxbytes = 50000

## timeout_short determines how many days fetch gets a newsgroup which
## has been accidentally opened. The default is two days.
# timeout_short = 1

## timeout_long determines how many days fetch will wait before not getting
## an unread newsgroup any more. The default is seven days.
# timeout_long = 6

## timeout_active determines how many days fetch will wait before re-reading
## the whole active file. The default is 90 days.
# timeout_active = 365

## If you want to have your newsreader score/kill on Xref: lines, you might
## want to uncomment this.
# create_all_links = 1

## If you want to filter out certain regular expressions in the header,
## create a "filterfile" (how this is done is explained in the README)
## and set
# filterfile = /path/to/your/filterfile

## If your hostname does not show up in the Message-IDs of your postings 
## properly, use this parameter to select something suitable. Do not use
## a fantasy name, it may interfere with the propagation of your messages.
## Note: if the message-id is generated by your newsreader, changing this
## setting will not affect it.
# hostname = host.domain.country