Re: networking prob
On Sat, Mar 31, 2001 at 05:26:26PM -0700, Jimmy Richards wrote:
>
> P3V4X:~# ifconfig eth0 down
>
> P3V4X:~# ifconfig eth0 inet netmask 255.255.255.0 -pointopoint 192.168.1.100
> address 192.168.1.100
My other debian computer works fine without the -pointopoint option.
Tried this anyway and got "Host name lookup failure"
In /etc/hostname I have simply "progeny" (though it is is debian 2.2_R2 potato).
In /etc/hosts : 127.0.0.1 localhost
192.168.1.101 progeny
192.168.1.100 debian
Any suggestions. I believe this should work.
Kevin
>
> P3V4X:~# route
> Kernel IP routing table
> Destination Gateway Genmask Flags Metric Ref Use Iface
> 192.168.1.0 * 255.255.255.0 U 0 0 0 eth0
>
>
> P3V4X:~# route add default gw 192.168.1.1
>
> P3V4X:~# route
> Kernel IP routing table
> Destination Gateway Genmask Flags Metric Ref Use Iface
> 192.168.1.0 * 255.255.255.0 U 0 0 0 eth0
> default 192.168.1.1 0.0.0.0 UG 0 0 0 eth0
>
>
>
> Hope that helps somehow, and good luck,
>
> Jimmy Richards
>
> On Saturday 31 March 2001 17:07, Kevin C. Smith wrote:
> > I installed Debian 2.2_R2 today on my second computer. It was running
> > Redhat then Progeny RC1 just fine. After installing Debian I am unable to
> > reach (ping) my gateway.
> >
> > #ifconfig (results are fine).
> > #route (takes a long time to finish, taking time with default gateway,
> > but when it does finish, 15 minutes later, results are fine).
> >
> > The correct module is loaded (tulip), the NIC is recognized during boot.
> > Use the same NIC on the other computer running Debian unstable, without
> > trouble.
> >
> > What am I missing. Progeny autoconfigured fine, so know I am missing
> > something.
> >
> > PS. The lights on my Linksys Etherfast Cable router show the connection
> > to this computer is failing every 10-15 seconds.
> >
> > Thanks,
>
>
Reply to: