XF 4.0 PROBLEMS
Howdy.
Seems I have a small problem.
XF 4.0 won;t run on my machine.
apt-get dist-upgrade does nothing (I am currently listed as woody, yet my sources.list points to stable,
unless I am trying to install X of course ;)
I have an ATI Xpert 2000.
Here is the output once I install task-x-windows,
and the relevant packages (via apt-get)
Error Message 1:
**********************************************
XFCom_Rage128 Version 1.3/ X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: 6 September 1999
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. Please report problems to x@suse.de
Operating System: Linux 2.2.5 i686 [ELF]
Configured drivers:
SVGA: server for SVGA graphics adaptors (Patchlevel 0):
rage128
(using VT number 7)
XF86Config: /etc/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keycodes: "xfree86"
(**) XKB: types: "default"
(**) XKB: compat: "default"
(**) XKB: symbols: "us(pc101)"
(**) XKB: geometry: "pc"
(**) Mouse: type: PS/2, device: /dev/psaux, buttons: 3
(**) SVGA: Graphics device ID: "ATI Xpert 2000 Rage 128"
(**) SVGA: Monitor ID: "ViewSonic A70"
(--) SVGA: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 70.88 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 74.59 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 76.01 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted.
(--) SVGA: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted.
(--) SVGA: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted.
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/:unscaled,/usr/X11R6/lib/X11/fonts/cyrillic/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/cyrillic/,/usr/X11R6/lib/X11/fonts/100dpi/,/usr/X11R6/lib/X11/fonts/75dpi/"
Couldn't open RGB_DB '/usr/X11R6/lib/X11/rgb'
(--) SVGA: PCI: ATI Rage128 RF rev 0, Memory @ 0xdc000000, 0xe1000000, I/O @ 0xc000
(--) SVGA: Found ATI Rage 128 RF chip
(--) SVGA: chipset: rage128
(--) SVGA: videoram: 32768k
(**) SVGA: Option "dac_8_bit"
(**) SVGA: Using 32 bpp, Depth 24, Color weight: 888
(--) SVGA: Maximum allowed dot-clock: 250.000 MHz
(**) SVGA: Mode "1024x768": mode clock = 85.000
(**) SVGA: Mode "800x600": mode clock = 69.650
(**) SVGA: Mode "640x480": mode clock = 45.800
(--) SVGA: Virtual resolution set to 1024x768
(--) SVGA: Using XAA (XFree86 Acceleration Architecture)
(--) SVGA: XAA: Solid filled rectangles
(--) SVGA: XAA: Screen-to-screen copy
(--) SVGA: XAA: 8x8 color expand pattern fill
(--) SVGA: XAA: Indirect CPU to screen color expansion (imagetext, polytext)
(--) SVGA: XAA: Using 8 128x128 areas for pixmap caching
(--) SVGA: XAA: Caching tiles and stipples
(--) SVGA: XAA: Horizontal and vertical lines and segments
error opening security policy file /usr/X11R6/lib/X11/xserver/SecurityPolicy
Fatal server error:
could not open default font 'fixed'
When reporting a problem related to a server crash, please send
the full server output, not just the last messages
XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0"
after 0 requests (0 known processed) with 0 events remaining.
************************************************
Error Message 2:
************************************************
XFCom_Rage128 Version 1.3/ X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: 6 September 1999
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. Please report problems to x@suse.de
Operating System: Linux 2.2.5 i686 [ELF]
Configured drivers:
SVGA: server for SVGA graphics adaptors (Patchlevel 0):
rage128
(using VT number 7)
XF86Config: /etc/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(--) no ModulePath specified using default: /usr/X11R6/lib/modules
dbe: Unknown error loading module
type1: Unknown error loading module
freetype: Unknown error loading module
Config Error: /etc/XF86Config:150
Section "InputDevice"
^^^^^^^^^^^^^
not a recognized section name
xinit: Server error.
****************************************************
Thanks for the help.
PS. Anyone know a good free e-mail service that is not run by an evil corporation?
Reply to: