Re: DLINK NIC modules via-rhine.c
The Card is a DLINK 530TX (not the TX+)
but the problem is that it has the newer via chipset (3065)
so i need the updated via-rhine module..
Martin Würtele wrote:
>
> On Tue, Dec 05, 2000 at 11:42:26AM +1100, Stephen Lavelle wrote:
> > Hello,
> > I have just installed a DLINK 530TX Nic in a debian 2.2 box.
> > This card uses the via-rhine module
> > However when I do #insmod via-rhine
> > I get:
> > using /lib/modules/2.2.17/net/via-rhine.o
> > /lib/modules/2.2.17/net/via-rhine.o: init_module: Device or resource
> > busy
> > Hint: this error can be caused by incorrect module parameters, including
> >
> > invalid IRQ...
> >
> > The output of #lspci for this device is:
> > 00:10.0 Ethernet controller: VIA Technologies, Inc.: Unknown device 3065
> >
> > (rev 4)
> >
> > I have looked at the drivers page at http://www.scyld.com and for this
> > device I need the via-rhine module >1.07. Debian 2.2 only has version
> > 1.01.
> > scyld.com has a via-rhine.c file which is a correct version, but I
> > cannot get this to compile.
> > Is there a debianised version of vi-rhine.o?
> > Am i barking up the wrong tree completely
>
> is use it with kernel 2.4.0-test9 and it works fine.
>
> hth martin
--
mailto:lavelles@mpx.com.au
Reply to: