Re: mounting cd-rw
If you are using ide-scsi emulation, do not access cd-rom drive with
ordinaery ide-cdrom driver. cdrecord is accessing ide-cdrom drive.
add lilo.conf (if cd-rw is hdc)
append="hdc=ide-scsi"
softlink /dev/scd0 -> /dev/cdrom
edit fstab (No more /dev/cdrw)
/dev/cdrom /mnt/cdrom iso9660 defaults,ro,user,noauto 0 0
That what I do with my cdrw.
Regards,
Osamu
On Mon, Oct 02, 2000 at 08:01:55PM -0400, Jacob Stowell wrote:
> Hi group,
>
> I was wondering if anyone might be able to help me figure out how to
> mount my cd-rw drive. I was able to install it and get it to record
> cd's, but I have been unable mount it and use it like a regular cd-rom.
> In other words, when i place a music cd or a data cd into that drive, no
> disk is detected. I have compiled support for scsi-emulation into the
> kernel--at least all of the ones that were recommended in the CD-writing
> How-To. I have tried to mount this drive both manually and through
> fstab, to no avail. below I have included some information that may be
> useful in determining what the problem may be. Thanks much for any help
> on this matter.
>
> The CD-RW that I have installed is an Acer 4232A 4X2X32
>
> when I try to mount the cd-rw manually this is the response i get:
>
> satchel[/home/jake]% mount /dev/scd1 /mnt/cdrw
> mount: block device /dev/scd1 is write-protected, mounting read-only
> mount: No medium found
>
> here are the entries in my fstab file:
>
> /dev/cdrom /mnt/cdrom iso9660 defaults,ro,user,noauto 0 0
> /dev/scd1 /mnt/cdrw iso9660 defaults,ro,user,noauto
> 0 0
>
> this is the output from the cdrecord -scanbus:
> Cdrecord 1.9 (i686-pc-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling
> Linux sg driver version: 2.1.38
> Using libscg version 'schily-0.1'
> scsibus0:
> cdrecord: Warning: controller returns wrong size for CD capabilities
> page.
> 0,0,0 0) 'E-IDE ' 'CD-ROM 32X/AKU ' 'U10I' Removable
> CD-ROM
> 0,1,0 1) 'ATAPI ' 'CD-R/RW 4X2X32 ' '4.AR' Removable
> CD-ROM
> 0,2,0 2) *
> 0,3,0 3) *
> 0,4,0 4) *
> 0,5,0 5) *
> 0,6,0 6) *
> 0,7,0 7) *
> The output from cat /proc/modules:
>
> cs4232 2960 0 (unused)
> uart401 6416 0 [cs4232]
> ad1848 16848 0 [cs4232]
> sound 58608 0 [cs4232 uart401 ad1848]
> soundcore 2768 5 [sound]
> loop 7904 0 (unused)
> ide-cd 23792 0
> ide-scsi 7504 0
> lp 5520 0 (unused)
> parport_pc 7600 1
> parport 7824 1 [lp parport_pc]
> tulip 30848 1
--
+ Osamu Aoki <debian@aokiconsulting.com>, GnuPG-key: 1024D/D5DE453D +
+ Fingerprint: 814E BD64 3288 40E7 E88E 3D92 C3F8 EA94 D5DE 453D +
+ === http://www.aokiconsulting.com ======= Cupertino, CA USA === +
Reply to: