RE: PPP help (bit 7 set to 0)
On Mon, 03 Jul 2000, gochenourj@cfw.com wrote:
- what version of pppd and debian are you using? This used come up on
slink with some providers... you might need the newer pppd.
> Hello,
> I did use pppconfig to configure the scripts.
> I've used PAP and chat. I can get chat through the login process (ogin: and
> ssword:)
> but then it establishes a connection and sends LCP ConfReq and does not get
> a reply and then I get LCP: timeout.
>
> I will type the scripts into this message (I have no lan or ppp connection
> from
> the debian box.)
>
> /etc/ppp/peers/provider is:
>
> hide-password
> noauth
> connect "/usr/sbin/chat -v -f /etc/chatscripts/vaix"
> debug
> /dev/ttyS3
> 115200
> defaultroute
> noipdefault
> user <username is here>
> remotename vaix
> ipparam vaix
> usepeerdns
>
> my /etc/chatscript/* is:
>
> #modeminit
> '' ATZ
> #ispnumber
> CONNECT ''
> ogin: <login here>
> ssword: \q<password here> (should that \q be there?)
> '' \d\c
>
> #end
>
>
> Those are my chatscript files for this connection. I can actually get dialed
> up, I see the remote modem ask for ogin: and ssword: and the scripts respond
> to that. Then it sets up the serial connection and sends the LCP ConfReq.
> Then it repeats that 9 times and gives the message:
>
> (from /var/log/messages and /etc/ppp/log)
>
> LCP: timeout sending Config-Requests
> Connection terminated.
> Receive serial link is not 8-bit clean:
> Problem: all had bit7 set to 0
> Exit.
>
> This is the message I get rather I connect via Chat or PAP. The chat logs in
> first, and the PAP will give this message right away. Any help is MUCH
> appriciated.
>
> Thank you kindly!
>
> Ashby
>
>
> > -----Original Message-----
> > From: john@dhh.gt.org [mailto:john@dhh.gt.org]
> > Sent: Sunday, July 02, 2000 10:27 AM
> > To: debian-user@lists.debian.org
> > Subject: Re: PPP help (bit 7 set to 0)
> >
> >
> > Ashby writes:
> > > Received serial link is not 8-bit clean. Problem: all had
> > bit 7 set to
> > > 0. Exit.
> >
> > If you did not use pppconfig to configure ppp do so. If you did, post
> > /etc/chatscripts/provider and /etc/ppp/peers/provider (remove
> > passwords).
> >
> > BTW the plog command will show you the ppp log, which is in
> > /var/log/ppp.log.
> > --
> > John Hasler
> > john@dhh.gt.org
> > Dancing Horse Hill
> > Elmwood, Wisconsin
> >
> >
> > --
> > Unsubscribe? mail -s unsubscribe
> > debian-user-request@lists.debian.org < /dev/null
> >
>
>
> --
> Unsubscribe? mail -s unsubscribe debian-user-request@lists.debian.org < /dev/null
Reply to: