RE: voodoo5 and debian
Hi,
You need a recent kernel for 3d/dri support (2.2.18preXX or 2.4.0-testX)
(Compile in tdfx support and maybe agpgart-support; in 2.2.18pre tdfx
needs agpgart) and you don' need mesa, its part of XFree 4.0.1
You will also need libglide3.
Run dexter to get a basic XF86Config-4 file. (Choose tdfx as
video-driver)
Then change it to your preferences.
If you got troubles, look in the XFree86-logfile (/var/log/
XFree86.?.log)
I have a voodoo4 4500 AGP (runs nice)
At the moment the voodoo5 is supported with single chip vsa100 = same
performance like voodoo4
Good luck
Reiner Stallknecht<stallus@t-online.de>
As an example, my XF86Config-4 (you don't need the modelines; because
the server will use default modes) :
# XF86Config-4 (XFree86 server configuration file) generated by Dexter,
the
# Debian X Configuration tool.
#
# Edit this file with caution, and see the XF86Config manual page.
# (Type "man XF86Config" at the shell prompt.)
Section "Files"
#FontPath "unix/:7100" # local font
server
# if the local font server has problems, we can fall back on
these
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/cyrillic"
#FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/Speedo"
#FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
EndSection
Section "ServerFlags"
EndSection
Section "Module"
Load "ddc"
Load "GLcore"
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "pex5"
Load "record"
Load "xie"
Load "bitmap"
Load "freetype"
Load "speedo"
Load "type1"
Load "vbe"
Load "int10"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc102"
Option "XkbLayout" "de"
EndSection
Section "InputDevice"
Identifier "Generic Mouse"
Driver "mouse"
Option "CorePointer"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/psaux"
Option "Resolution" "250"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
Section "Device"
Identifier "Generic Graphics Device"
Driver "tdfx"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
HorizSync 30-96
VertRefresh 50-160
#Gamma 1.90
#Gamma Redgamma Greengamma Bluegamma
Option "DPMS"
UseModes "eizo_f520+voodoo_4"
EndSection
Section "Modes"
Identifier "eizo_f520+voodoo_4"
Mode "320x240"
DotClock 15.750
HTimings 320 324 372 400
VTimings 240 245 246 262
Flags "Doublescan"
EndMode
Mode "512x384"
DotClock 31.50
HTimings 512 528 592 640
VTimings 384 385 388 408
Flags "-HSync" "-VSync"
EndMode
Mode "640x480"
DotClock 36
HTimings 640 696 752 832
VTimings 480 481 484 509
Flags "-HSync" "-VSync"
EndMode
Mode "800x600"
DotClock 56.30
HTimings 800 832 896 1048
VTimings 600 601 604 631
Flags "+HSync" "+VSync"
EndMode
Mode "1024x768"
DotClock 94.50
HTimings 1024 1072 1168 1376
VTimings 768 769 772 808
Flags "+HSync" "+VSync"
EndMode
Mode "1152x864"
DotClock 108
HTimings 1152 1216 1344 1600
VTimings 864 865 868 900
Flags "+HSync" "+VSync"
EndMode
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Generic Graphics Device"
Monitor "Generic Monitor"
DefaultDepth 16
SubSection "Display"
Depth 1
Modes "1152x864" "1024x768" "800x600"
"640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1152x864" "1024x768" "800x600"
"640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1152x864" "1024x768" "800x600"
"640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1152x864" "1024x768" "800x600"
"640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480" "512x384"
"320x240" "1152x864"
EndSubSection
SubSection "Display"
Depth 24
Modes "1152x864" "1024x768" "800x600"
"640x480" "512x384" "320x240"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Generic Mouse"
EndSection
Section "DRI"
Mode 0666
EndSection
# end of XF86Config
Reply to: