[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: 2.4.0-test11, PCMCIA ethernet card through yenta-socket

Pending further investigation, we now allege that Marvin Stodolsky wrote:
> My PCMCIA "3Com Corporation", "3CCFE575BT", "LAN Cardbus Card", "001"
>   manfid: 0x0101, 0x5157
>   function: 6 (network)
>   PCI id: 0x10b7, 0x5157
> is working fine under 2.2.17 and under the 2.4.0-test11 with the "old
> way" PCMCIA support of compiling all the pcmcia modules,
> # lsmod
> Module                  Size  Used by
> 3c575_cb               20064   2 
> cb_enabler              2736   2  [3c575_cb]
> ds                      6672   2  [cb_enabler]
> i82365                 23232   2 
> pcmcia_core            43392   0  [cb_enabler ds i82365]
> Thus far I've been unable to get eth0 functional with PCMCIA support
> specified "the new way" through the kernel .config file, after which
> support would presuably come from:
> 3c59x
> cb_enabler.o  
> pcmcia_core.o  
> yenta_socket.o

It doesn't work.  The 3c575 chipset is different than the 3c59x
series. You might have luck with using the kernel-level support with
the 3x575_cb.o module from pcmcia-cs, but I wouldn't lay money on it.

Reply to: