Whoops I really do need help...
Okay short story,
I did a reiser-debian install and I REALLY need help setting up X. I
am using my old XF86Config so that should be fine. I posted this
already, but then the strangest thing happened. I was working on
getting it fixed, I swapped xdm for gdm and presto, xdm fired up and I
was playing in X again. Then I logged out and rebooted to find the
thread I had started and to say that I fixed it. Did that, booted back
to linux and I get the same errors as before :-(. Here is the output
from a failed startx...
XFree86 Version 3.3.6 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: January 8 2000
If the server is older than 6-12 months, or if your card is
newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.2.17pre10 i686 [ELF]
Configured drivers:
SVGA: server for SVGA graphics adaptors (Patchlevel 1):
NV1, STG2000, RIVA 128, RIVA TNT, RIVA TNT2, RIVA ULTRA TNT2,
RIVA VANTA, RIVA ULTRA VANTA, RIVA INTEGRATED, GeForce 256,
GeForce DDR, Quadro, ET4000, ET4000W32, ET4000W32i,
ET4000W32i_rev_b,
ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a, ET4000W32p_rev_b,
ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100, et3000, pvga1,
wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, r128,
ati,
sis86c201, sis86c202, sis86c205, sis86c215, sis86c225, sis5597,
sis5598, sis6326, sis530, sis620, sis300, sis630, sis540,
tvga8200lx,
tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga8900d, tvga9000,
tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi, tgui9420,
tgui9420dgi,
tgui9430dgi, tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682,
tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520,
cyber9525, 3dimage975, 3dimage985, cyber9397dvd, blade3d,
cyberblade,
clgd5420, clgd5422, clgd5424, clgd5426, clgd5428, clgd5429,
clgd5430,
clgd5434, clgd5436, clgd5446, clgd5480, clgd5462, clgd5464,
clgd5465,
clgd6205, clgd6215, clgd6225, clgd6235, clgd7541, clgd7542,
clgd7543,
clgd7548, clgd7555, clgd7556, ncr77c22, ncr77c22e, cpq_avga,
mga2064w,
mga1064sg, mga2164w, mga2164w AGP, mgag200, mgag100, mgag400,
oti067,
oti077, oti087, oti037c, al2101, ali2228, ali2301, ali2302,
ali2308,
ali2401, cl6410, cl6412, cl6420, cl6440, video7, ark1000vl,
ark1000pv,
ark2000pv, ark2000mt, mx, realtek, s3_savage, s3_virge, AP6422,
AT24,
AT3D, s3_svga, NM2070, NM2090, NM2093, NM2097, NM2160, NM2200,
ct65520, ct65525, ct65530, ct65535, ct65540, ct65545, ct65546,
ct65548, ct65550, ct65554, ct65555, ct68554, ct69000, ct64200,
ct64300, mediagx, V1000, V2100, V2200, p9100, spc8110, i740,
i740_pci,
i810, i810-dc100, i810e, Voodoo Banshee, Voodoo3, smi, generic
(using VT number 7)
XF86Config: /usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keymap: "xfree86(us)" (overrides other XKB settings)
(**) Mouse: type: imps/2, device: /dev/mouse, buttons: 5
(**) Mouse: zaxismapping: (-)4 (+)5
(**) SVGA: Graphics device ID: "NVIDIA Riva TNT2"
(**) SVGA: Monitor ID: "Dell P990"
Warning: The directory "/usr/X11R6/lib/X11/fonts/freefont/" does not
exist.
Entry deleted from font path.
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/,unix/:7100"
(--) SVGA: PCI: NVidia Riva TNT2 rev 17, Memory @ 0xf4000000, 0xfc000000
(--) SVGA: chipset: RIVA TNT2
(--) SVGA: videoram: 32640k
(**) SVGA: Option "dac_8_bit"
(**) SVGA: Using 32 bpp, Depth 24, Color weight: 888
(--) SVGA: Maximum allowed dot-clock: 350.000 MHz
(**) SVGA: Mode "1024x768": mode clock = 94.500
(--) SVGA: Virtual resolution set to 1024x768
(--) SVGA: RIVA TNT2: Using hardware cursor
(--) SVGA: Using XAA (XFree86 Acceleration Architecture)
(--) SVGA: XAA: Solid filled rectangles
(--) SVGA: XAA: Screen-to-screen copy
(--) SVGA: XAA: 8x8 color expand pattern fill
(--) SVGA: XAA: Using 8 128x64 areas for pixmap caching
(--) SVGA: XAA: Caching tiles and stipples
(--) SVGA: XAA: Horizontal and vertical lines and segments
System: `/usr/X11R6/lib/X11/xkb/xkbcomp -w 1 -R/usr/X11R6/lib/X11/xkb
-xkm -m us -em1 "The XKEYBOARD keymap compiler (xkbcomp) reports:" -emp
"> " -eml "Errors from xkbcomp are not fatal to the X server"
keymap/xfree86 compiled/xfree86.xkm'
_FontTransSocketUNIXConnect: Can't connect: errno = 111
failed to set default font path
'/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/,unix/:7100'
Fatal server error:
could not open default font 'fixed'
When reporting a problem related to a server crash, please send
the full server output, not just the last messages
X connection to :0.0 broken (explicit kill or server shutdown).
===============================================================
I really need help on this one. I don't understand how it worked fine
once, and then died again. The screen flickers while x tries in vain to
start, then it drops me back to the terminal. Any advice would be
greately appreciated.
TIA,
jt
Reply to: