RE: ESS1868
On 20-Sep-2000 Tommy Wu wrote:
> Hi!
>
> I've a ESS1868 sound card on my box.
> But I can install the driver for this. It's always show something
> failed.
>
> Here is my syslog for isapnp and sb.
>
> === cut start ===
> isapnp: Scanning for Pnp cards...
> isapnp: Card 'ESS ES1868 Plug and Play AudioDrive'
> isapnp: 1 Plug & Play card detected total
> Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996
> sb: ESS ES1868 Plug and Play AudioDrive detected
> sb: ISAPnP reports 'ESS ES1868 Plug and Play AudioDrive' at i/o 0x220,
> irq 5, dm
> a 1, 3
> SB 3.01 detected OK (220)
> ESS chip ES1868 specified
> <ESS ES1868 AudioDrive (rev 11) (3.01)> at 0x220 irq 5 dma 1,3
> sb: ESS ES1868 Plug and Play AudioDrive detected
> sb: Failed to initialize ESS ES1868 Plug and Play AudioDrive
> sb: 1 Soundblaster PnP card(s) found.
> YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft
> 1993-1996
> <Yamaha OPL3> at 0x388
> === cut end ===
>
> How can I do for this error ?
I have an ESS1868 too, and it's working.
I don't use isapnp, since I'm using the default card
config.
My sb options are the following:
esstype=1868 io=0x220 irq=5 dma=1 dma16=-1
To check these, just run the config program of the card from DOS.
What looks strange to me is "dma 1,3". Why two 8-bit dma channels ?
Reply to:
- Follow-Ups:
- Re: ESS1868
- From: Michael Smith <msmith4@gladstone.uoregon.edu>
- References:
- ESS1868
- From: Tommy Wu <tommy@teatime.com.tw>