[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

XFree86 server for ATI Rage 128 Pro

Hello All:

Has anyone found a working driver for an ATI Rage 128 Pro AGP card?
I have tried the SVGA and it does not recognize the card, but tries to
operate it and I get a blank display which can be terminated with
Ctl-Alt-Backspace.  A dump of the xserver's output is below as is the
/proc/pci dump for this device.  I am using version 3.3.6 of XFree86.

Any help would be appreciated.


----- xserver_SVGA output -----

XFree86 Version 3.3.6 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: January 8 2000
	If the server is older than 6-12 months, or if your card is newer
	than the above date, look for a newer version before reporting
	problems.  (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.2.14 i586 [ELF] 
Configured drivers:
  SVGA: server for SVGA graphics adaptors (Patchlevel 1):
-- snip --
(--) SVGA: PCI: ATI Rage 128 PF rev 0, Memory @ 0xe0000000, MMIO @ 0xefefc000, I/O @ 0xac00
Using XFree86 ATI driver version 4.7.
Unknown graphics controller detected.
Unknown chip descriptor in BIOS:  0x3F3F0000.
Unknown video adapter detected.
Brooktree 476 or similar RAMDAC detected.
Support for this video adapter is highly experimental!

----- /proc/pci dump -----

  Bus  1, device   0, function  0:
    VGA compatible controller: ATI Unknown device (rev 0).
      Vendor id=1002. Device id=5046.
      Medium devsel.  Fast back-to-back capable.  IRQ 11.  Master Capable.  Latency=64.  Min Gnt=8.
      Prefetchable 32 bit memory at 0xe0000000 [0xe0000008].
      I/O at 0xac00 [0xac01].
      Non-prefetchable 32 bit memory at 0xefefc000 [0xefefc000].

Carlo U. Segre -- Associate Professor of Physics
Illinois Institute of Technology
Voice: 312.567.3498            Fax: 312.567.3494
Carlo.Segre@iit.edu    http://www.iit.edu/~segre

Reply to: