Re: ppp connection failure - re-post
On Mon, 22 May 2000 18:25:43 BST, Jo Hoffmann writes:
>> May 18 17:32:17 heman pppd[666]: Serial connection established.
>> May 18 17:32:17 heman pppd[666]: Using interface ppp0
>> May 18 17:32:17 heman pppd[666]: Connect: ppp0 <--> /dev/ttyS1
>> May 18 17:32:18 heman pppd[666]: sent [LCP ConfReq id=0x1 <asyncmap 0x0>
>> <magic 0xe7f3fcfa> <pcomp> <accomp>]
>> May 18 17:32:45 heman last message repeated 9 times
>> May 18 17:32:48 heman pppd[666]: LCP: timeout sending Config-Requests
>> May 18 17:32:48 heman pppd[666]: Connection terminated.
>> May 18 17:32:48 heman pppd[666]: Hangup (SIGHUP)
>> May 18 17:32:48 heman pppd[666]: Exit.
ahemm, LCP doesn´t even come up, the remote side isn´t sending you any
packets at all. Authentication (PAP,CHAP,whatever) takes place _after_
LCP.
Maybe the remote side is somewhat misconsigured or you need to send
some black-magic packet(s) to start ppp on the remote end? In my
experience this is often the case if you have a shell account where
you have to issue a "start ppp" or similar to fire ppp or there is
kind of a misconfigured tunneling (L2TP comes to mind especially)
which isn´t configured properly.
hth,
&rw
--
/ Robert Waldner <Waldner@KPNQwest.at> | Phone: +43 1 89933 0 Fax x533 \
\ KPNQwest/AT tech staff | Diefenbachg. 35 A-1150 Wien /
Reply to: